mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
7619badb9c
Kernel stores information to the RTC_SCRATCH0 and RTC_SCRATCH1 registers for wakeup from RTC-only mode with DDR in self-refresh. Parse these registers during SPL boot and jump to the kernel resume vector if the device is waking up from RTC-only modewith DDR in Self-refresh. The RTC scratch register layout used is: SCRATCH0 : bits00-31 : kernel resume address SCRATCH1 : bits00-15 : RTC magic value used to detect valid config SCRATCH1 : bits16-31 : board type information populated by bootloader During the normal boot path the SCRATCH1 : bits16-31 are updated with the eeprom read board type data. In the rtc_only boot path the rtc scratchpad register is read and the board type is determined and correspondingly ddr dpll parameters are set. This is done so as to avoid costly i2c read to eeprom. RTC-only +DRR in self-refresh mode support is currently only enabled for am43xx_evm_rtconly_config. This is not to be used with epos evm builds. Signed-off-by: Tero Kristo <t-kristo@ti.com> [j-keerthy@ti.com Rebased to latest u-boot master branch] Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
287 lines
6.5 KiB
Text
287 lines
6.5 KiB
Text
if TI816X
|
|
|
|
config TARGET_TI816X_EVM
|
|
bool "Support ti816x_evm"
|
|
help
|
|
This option specifies support for the TI8168 EVM development platform
|
|
with PG2.0 silicon and DDR3 DRAM.
|
|
|
|
endif
|
|
|
|
if TI814X
|
|
|
|
config TARGET_TI814X_EVM
|
|
bool "Support ti814x_evm"
|
|
help
|
|
This option specifies support for the TI8148
|
|
EVM development platform.
|
|
|
|
endif
|
|
|
|
if AM33XX
|
|
|
|
config AM33XX_CHILISOM
|
|
bool
|
|
select SUPPORT_SPL
|
|
|
|
choice
|
|
prompt "AM33xx board select"
|
|
|
|
config TARGET_AM335X_EVM
|
|
bool "Support am335x_evm"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
select TI_I2C_BOARD_DETECT
|
|
imply SPL_ENV_SUPPORT
|
|
imply SPL_EXT_SUPPORT
|
|
imply SPL_FAT_SUPPORT
|
|
imply SPL_GPIO_SUPPORT
|
|
imply SPL_I2C_SUPPORT
|
|
imply SPL_LIBCOMMON_SUPPORT
|
|
imply SPL_LIBDISK_SUPPORT
|
|
imply SPL_LIBGENERIC_SUPPORT
|
|
imply SPL_MMC_SUPPORT
|
|
imply SPL_NAND_SUPPORT
|
|
imply SPL_POWER_SUPPORT
|
|
imply SPL_SERIAL_SUPPORT
|
|
imply SPL_WATCHDOG_SUPPORT
|
|
imply SPL_YMODEM_SUPPORT
|
|
imply SPL_SYS_MALLOC_SIMPLE
|
|
imply SPL_SEPARATE_BSS
|
|
imply SPL_DM
|
|
imply SPL_DM_SEQ_ALIAS
|
|
imply SPL_OF_LIBFDT
|
|
help
|
|
This option specifies support for the AM335x
|
|
GP and HS EVM development platforms. The AM335x
|
|
GP EVM is a standalone test, development, and
|
|
evaluation module system that enables developers
|
|
to write software and develop hardware around
|
|
an AM335x processor subsystem.
|
|
|
|
config TARGET_AM335X_BALTOS
|
|
bool "Support am335x_baltos"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_AM335X_IGEP003X
|
|
bool "Support am335x_igep003x"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_AM335X_SHC
|
|
bool "Support am335x based shc board from bosch"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
imply CMD_SPL
|
|
|
|
config TARGET_AM335X_SL50
|
|
bool "Support am335x_sl50"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_BAV335X
|
|
bool "Support bav335x"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
help
|
|
The BAV335x OEM Network Processor integrates all the functions of an
|
|
embedded network computer in a small, easy to use SODIMM module which
|
|
incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
|
|
processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
|
|
ethernet with simple connection to external connectors.
|
|
|
|
For more information, visit: http://birdland.com/oem
|
|
|
|
config TARGET_BRXRE1
|
|
bool "Support BRXRE1"
|
|
select BOARD_LATE_INIT
|
|
|
|
config TARGET_BRPPT1
|
|
bool "Support BRPPT1"
|
|
select BOARD_LATE_INIT
|
|
|
|
config TARGET_CHILIBOARD
|
|
bool "Grinn chiliBoard"
|
|
select AM33XX_CHILISOM
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
|
|
config TARGET_CM_T335
|
|
bool "Support cm_t335"
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_DRACO
|
|
bool "Support draco"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_ETAMIN
|
|
bool "Support etamin"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_PCM051
|
|
bool "Support pcm051"
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_PENGWYN
|
|
bool "Support pengwyn"
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_PEPPER
|
|
bool "Support pepper"
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_PXM2
|
|
bool "Support pxm2"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_RASTABAN
|
|
bool "Support rastaban"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_RUT
|
|
bool "Support rut"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_THUBAN
|
|
bool "Support thuban"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
|
|
config TARGET_PDU001
|
|
bool "Support PDU001"
|
|
select DM
|
|
select DM_SERIAL
|
|
help
|
|
Support for PDU001 platform developed by EETS GmbH.
|
|
The PDU001 is a processor and display unit developed around
|
|
the Computing-Module m2 from bytes at work AG.
|
|
|
|
endchoice
|
|
|
|
endif
|
|
|
|
if AM43XX
|
|
|
|
choice
|
|
prompt "AM43xx board select"
|
|
|
|
config TARGET_AM43XX_EVM
|
|
bool "Support am43xx_evm"
|
|
select BOARD_LATE_INIT
|
|
select TI_I2C_BOARD_DETECT
|
|
imply DM_ETH
|
|
imply DM_I2C
|
|
imply DM_SPI
|
|
imply DM_SPI_FLASH
|
|
imply SPI_FLASH_BAR
|
|
imply SPL_ENV_SUPPORT
|
|
imply SPL_EXT_SUPPORT
|
|
imply SPL_FAT_SUPPORT
|
|
imply SPL_GPIO_SUPPORT
|
|
imply SPL_I2C_SUPPORT
|
|
imply SPL_LIBCOMMON_SUPPORT
|
|
imply SPL_LIBDISK_SUPPORT
|
|
imply SPL_LIBGENERIC_SUPPORT
|
|
imply SPL_MMC_SUPPORT
|
|
imply SPL_NAND_SUPPORT
|
|
imply SPL_POWER_SUPPORT
|
|
imply SPL_SERIAL_SUPPORT
|
|
imply SPL_WATCHDOG_SUPPORT
|
|
imply SPL_YMODEM_SUPPORT
|
|
help
|
|
This option specifies support for the AM43xx
|
|
GP and HS EVM development platforms.The AM437x
|
|
GP EVM is a standalone test, development, and
|
|
evaluation module system that enables developers
|
|
to write software and develop hardware around
|
|
an AM43xx processor subsystem.
|
|
|
|
config TARGET_CM_T43
|
|
bool "Support cm_t43"
|
|
|
|
endchoice
|
|
|
|
config SPL_RTC_DDR_SUPPORT
|
|
bool
|
|
depends on SPL
|
|
prompt "Enable RTC-DDR ONLY Support"
|
|
help
|
|
If you want RTC-DDR ONLY Support, say Y. RTC Only with DDR in
|
|
self-refresh mode is a special power saving mode where in all
|
|
the other voltages are turned off apart from the RTC domain and DDR.
|
|
So only RTC is alive and ticking and one can program it to wake
|
|
up after a predetermined period. Once RTC alarm fires, the PMIC
|
|
powers up all the voltage domains. U-Boot takes a special path
|
|
as the DDR has contents is in self-refresh and restore path is
|
|
followed.
|
|
|
|
endif
|
|
|
|
if AM43XX || AM33XX
|
|
config ISW_ENTRY_ADDR
|
|
hex "Address in memory or XIP flash of bootloader entry point"
|
|
help
|
|
After any reset, the boot ROM on the AM43XX SOC
|
|
searches the boot media for a valid boot image.
|
|
For non-XIP devices, the ROM then copies the
|
|
image into internal memory.
|
|
For all boot modes, after the ROM processes the
|
|
boot image it eventually computes the entry
|
|
point address depending on the device type
|
|
(secure/non-secure), boot media (xip/non-xip) and
|
|
image headers.
|
|
default 0x402F4000 if AM43XX
|
|
default 0x402F0400 if AM33XX
|
|
|
|
config PUB_ROM_DATA_SIZE
|
|
hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
|
|
help
|
|
During the device boot, the public ROM uses the top of
|
|
the public L3 OCMC RAM to store r/w data like stack,
|
|
heap, globals etc. When the ROM is copying the boot
|
|
image from the boot media into memory, the image must
|
|
not spill over into this area. This value can be used
|
|
during compile time to determine the maximum size of a
|
|
boot image. Once the ROM transfers control to the boot
|
|
image, this area is no longer used, and can be reclaimed
|
|
for run time use by the boot image.
|
|
default 0x8400
|
|
endif
|