mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
dec7c84227
The original code was configuring the external pins after enabling the R_PIO clock, which meant the configuration never made it to the pin controller the first time in SPL. Why this was working before is uncertain. Maybe the state was left from a previous boot sequence, or RSB just happened to be the default configuration. However with some A33 chips, SPL failed to configure the PMIC. This was seen by me and Maxime on the Sinlinx SinA33 dev board. Reordering the calls fixed this. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
175 lines
3.9 KiB
C
175 lines
3.9 KiB
C
/*
|
|
* (C) Copyright 2014 Hans de Goede <hdegoede@redhat.com>
|
|
*
|
|
* Based on allwinner u-boot sources rsb code which is:
|
|
* (C) Copyright 2007-2013
|
|
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
|
|
* lixiang <lixiang@allwinnertech.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/prcm.h>
|
|
#include <asm/arch/rsb.h>
|
|
|
|
static int rsb_set_device_mode(void);
|
|
|
|
static void rsb_cfg_io(void)
|
|
{
|
|
#ifdef CONFIG_MACH_SUN8I
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPL(0), SUN8I_GPL_R_RSB);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPL(1), SUN8I_GPL_R_RSB);
|
|
sunxi_gpio_set_pull(SUNXI_GPL(0), 1);
|
|
sunxi_gpio_set_pull(SUNXI_GPL(1), 1);
|
|
sunxi_gpio_set_drv(SUNXI_GPL(0), 2);
|
|
sunxi_gpio_set_drv(SUNXI_GPL(1), 2);
|
|
#elif defined CONFIG_MACH_SUN9I
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPN(0), SUN9I_GPN_R_RSB);
|
|
sunxi_gpio_set_cfgpin(SUNXI_GPN(1), SUN9I_GPN_R_RSB);
|
|
sunxi_gpio_set_pull(SUNXI_GPN(0), 1);
|
|
sunxi_gpio_set_pull(SUNXI_GPN(1), 1);
|
|
sunxi_gpio_set_drv(SUNXI_GPN(0), 2);
|
|
sunxi_gpio_set_drv(SUNXI_GPN(1), 2);
|
|
#else
|
|
#error unsupported MACH_SUNXI
|
|
#endif
|
|
}
|
|
|
|
static void rsb_set_clk(void)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
u32 div = 0;
|
|
u32 cd_odly = 0;
|
|
|
|
/* Source is Hosc24M, set RSB clk to 3Mhz */
|
|
div = 24000000 / 3000000 / 2 - 1;
|
|
cd_odly = div >> 1;
|
|
if (!cd_odly)
|
|
cd_odly = 1;
|
|
|
|
writel((cd_odly << 8) | div, &rsb->ccr);
|
|
}
|
|
|
|
int rsb_init(void)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
|
|
/* Enable RSB and PIO clk, and de-assert their resets */
|
|
prcm_apb0_enable(PRCM_APB0_GATE_PIO | PRCM_APB0_GATE_RSB);
|
|
|
|
/* Setup external pins */
|
|
rsb_cfg_io();
|
|
|
|
writel(RSB_CTRL_SOFT_RST, &rsb->ctrl);
|
|
rsb_set_clk();
|
|
|
|
return rsb_set_device_mode();
|
|
}
|
|
|
|
static int rsb_await_trans(void)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
unsigned long tmo = timer_get_us() + 1000000;
|
|
u32 stat;
|
|
int ret;
|
|
|
|
while (1) {
|
|
stat = readl(&rsb->stat);
|
|
if (stat & RSB_STAT_LBSY_INT) {
|
|
ret = -EBUSY;
|
|
break;
|
|
}
|
|
if (stat & RSB_STAT_TERR_INT) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
if (stat & RSB_STAT_TOVER_INT) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
if (timer_get_us() > tmo) {
|
|
ret = -ETIME;
|
|
break;
|
|
}
|
|
}
|
|
writel(stat, &rsb->stat); /* Clear status bits */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rsb_set_device_mode(void)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
unsigned long tmo = timer_get_us() + 1000000;
|
|
|
|
writel(RSB_DMCR_DEVICE_MODE_START | RSB_DMCR_DEVICE_MODE_DATA,
|
|
&rsb->dmcr);
|
|
|
|
while (readl(&rsb->dmcr) & RSB_DMCR_DEVICE_MODE_START) {
|
|
if (timer_get_us() > tmo)
|
|
return -ETIME;
|
|
}
|
|
|
|
return rsb_await_trans();
|
|
}
|
|
|
|
static int rsb_do_trans(void)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
|
|
setbits_le32(&rsb->ctrl, RSB_CTRL_START_TRANS);
|
|
return rsb_await_trans();
|
|
}
|
|
|
|
int rsb_set_device_address(u16 device_addr, u16 runtime_addr)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
|
|
writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_addr) |
|
|
RSB_DEVADDR_DEVICE_ADDR(device_addr), &rsb->devaddr);
|
|
writel(RSB_CMD_SET_RTSADDR, &rsb->cmd);
|
|
|
|
return rsb_do_trans();
|
|
}
|
|
|
|
int rsb_write(const u16 runtime_device_addr, const u8 reg_addr, u8 data)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
|
|
writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
|
|
writel(reg_addr, &rsb->addr);
|
|
writel(data, &rsb->data);
|
|
writel(RSB_CMD_BYTE_WRITE, &rsb->cmd);
|
|
|
|
return rsb_do_trans();
|
|
}
|
|
|
|
int rsb_read(const u16 runtime_device_addr, const u8 reg_addr, u8 *data)
|
|
{
|
|
struct sunxi_rsb_reg * const rsb =
|
|
(struct sunxi_rsb_reg *)SUNXI_RSB_BASE;
|
|
int ret;
|
|
|
|
writel(RSB_DEVADDR_RUNTIME_ADDR(runtime_device_addr), &rsb->devaddr);
|
|
writel(reg_addr, &rsb->addr);
|
|
writel(RSB_CMD_BYTE_READ, &rsb->cmd);
|
|
|
|
ret = rsb_do_trans();
|
|
if (ret)
|
|
return ret;
|
|
|
|
*data = readl(&rsb->data) & 0xff;
|
|
|
|
return 0;
|
|
}
|