mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-05 20:54:31 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
93 lines
2.4 KiB
C
93 lines
2.4 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Configuration settings for Udoo board.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#include "imx6_spl.h"
|
|
|
|
/* Provide the MACH_TYPE value that the vendor kernel requires. */
|
|
#define CONFIG_MACH_TYPE 4800
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (2 * SZ_1M)
|
|
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART2_BASE
|
|
|
|
/* SATA Configs */
|
|
|
|
#ifdef CONFIG_CMD_SATA
|
|
#define CONFIG_SYS_SATA_MAX_DEVICE 1
|
|
#define CONFIG_DWC_AHSATA_PORT_ID 0
|
|
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
|
|
#define CONFIG_LBA48
|
|
#endif
|
|
|
|
/* Network support */
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
|
#define CONFIG_ETHPRIME "FEC"
|
|
#define CONFIG_FEC_MXC_PHYADDR 6
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x10000000
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
|
|
|
|
/* MMC Configuration */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=ttymxc1,115200\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdtfile=undefined\0" \
|
|
"fdt_addr=0x18000000\0" \
|
|
"fdt_addr_r=0x18000000\0" \
|
|
"ip_dyn=yes\0" \
|
|
"mmcdev=0\0" \
|
|
"mmcrootfstype=ext4\0" \
|
|
"findfdt="\
|
|
"if test ${board_rev} = MX6Q; then " \
|
|
"setenv fdtfile imx6q-udoo.dtb; fi; " \
|
|
"if test ${board_rev} = MX6DL; then " \
|
|
"setenv fdtfile imx6dl-udoo.dtb; fi; " \
|
|
"if test ${fdtfile} = undefined; then " \
|
|
"echo WARNING: Could not determine dtb to use; fi\0" \
|
|
"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
"ramdisk_addr_r=0x13000000\0" \
|
|
"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
|
|
BOOTENV
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(SATA, sata, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/* Environment organization */
|
|
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
#endif /* __CONFIG_H * */
|