u-boot/arch/arm/cpu/arm926ejs/mx28/spl_lradc_init.c
Marek Vasut 3f3255c3d7 i.MX28: Add LRADC init to i.MX28 SPL
This code is part of battery boot support for i.MX28.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
2012-05-15 08:31:36 +02:00

86 lines
2.8 KiB
C

/*
* Freescale i.MX28 Battery measurement init
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include "mx28_init.h"
void mx28_lradc_init(void)
{
struct mx28_lradc_regs *regs = (struct mx28_lradc_regs *)MXS_LRADC_BASE;
writel(LRADC_CTRL0_SFTRST, &regs->hw_lradc_ctrl0_clr);
writel(LRADC_CTRL0_CLKGATE, &regs->hw_lradc_ctrl0_clr);
writel(LRADC_CTRL0_ONCHIP_GROUNDREF, &regs->hw_lradc_ctrl0_clr);
clrsetbits_le32(&regs->hw_lradc_ctrl3,
LRADC_CTRL3_CYCLE_TIME_MASK,
LRADC_CTRL3_CYCLE_TIME_6MHZ);
clrsetbits_le32(&regs->hw_lradc_ctrl4,
LRADC_CTRL4_LRADC7SELECT_MASK |
LRADC_CTRL4_LRADC6SELECT_MASK,
LRADC_CTRL4_LRADC7SELECT_CHANNEL7 |
LRADC_CTRL4_LRADC6SELECT_CHANNEL10);
}
void mx28_lradc_enable_batt_measurement(void)
{
struct mx28_lradc_regs *regs = (struct mx28_lradc_regs *)MXS_LRADC_BASE;
/* Check if the channel is present at all. */
if (!(readl(&regs->hw_lradc_status) & LRADC_STATUS_CHANNEL7_PRESENT))
return;
writel(LRADC_CTRL1_LRADC7_IRQ_EN, &regs->hw_lradc_ctrl1_clr);
writel(LRADC_CTRL1_LRADC7_IRQ, &regs->hw_lradc_ctrl1_clr);
clrsetbits_le32(&regs->hw_lradc_conversion,
LRADC_CONVERSION_SCALE_FACTOR_MASK,
LRADC_CONVERSION_SCALE_FACTOR_LI_ION);
writel(LRADC_CONVERSION_AUTOMATIC, &regs->hw_lradc_conversion_set);
/* Configure the channel. */
writel((1 << 7) << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET,
&regs->hw_lradc_ctrl2_clr);
writel(0xffffffff, &regs->hw_lradc_ch7_clr);
clrbits_le32(&regs->hw_lradc_ch7, LRADC_CH_NUM_SAMPLES_MASK);
writel(LRADC_CH_ACCUMULATE, &regs->hw_lradc_ch7_clr);
/* Schedule the channel. */
writel(1 << 7, &regs->hw_lradc_ctrl0_set);
/* Start the channel sampling. */
writel(((1 << 7) << LRADC_DELAY_TRIGGER_LRADCS_OFFSET) |
((1 << 3) << LRADC_DELAY_TRIGGER_DELAYS_OFFSET) |
100, &regs->hw_lradc_delay3);
writel(0xffffffff, &regs->hw_lradc_ch7_clr);
writel(LRADC_DELAY_KICK, &regs->hw_lradc_delay3_set);
}