u-boot/include/usb.h
Bin Meng 3e59f59015 dm: usb: Add a new USB controller operation 'get_max_xfer_size'
The HCD may have limitation on the maximum bytes to be transferred
in a USB transfer. USB class driver needs to be aware of this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2017-09-27 12:12:21 +02:00

1062 lines
34 KiB
C

/*
* (C) Copyright 2001
* Denis Peter, MPL AG Switzerland
*
* Adapted for U-Boot driver model
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
* Note: Part of this code has been derived from linux
*
*/
#ifndef _USB_H_
#define _USB_H_
#include <fdtdec.h>
#include <usb_defs.h>
#include <linux/usb/ch9.h>
#include <asm/cache.h>
#include <part.h>
/*
* The EHCI spec says that we must align to at least 32 bytes. However,
* some platforms require larger alignment.
*/
#if ARCH_DMA_MINALIGN > 32
#define USB_DMA_MINALIGN ARCH_DMA_MINALIGN
#else
#define USB_DMA_MINALIGN 32
#endif
/* Everything is aribtrary */
#define USB_ALTSETTINGALLOC 4
#define USB_MAXALTSETTING 128 /* Hard limit */
#define USB_MAX_DEVICE 32
#define USB_MAXCONFIG 8
#define USB_MAXINTERFACES 8
#define USB_MAXENDPOINTS 16
#define USB_MAXCHILDREN 8 /* This is arbitrary */
#define USB_MAX_HUB 16
#define USB_CNTL_TIMEOUT 100 /* 100ms timeout */
/*
* This is the timeout to allow for submitting an urb in ms. We allow more
* time for a BULK device to react - some are slow.
*/
#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 1000)
/* device request (setup) */
struct devrequest {
__u8 requesttype;
__u8 request;
__le16 value;
__le16 index;
__le16 length;
} __attribute__ ((packed));
/* Interface */
struct usb_interface {
struct usb_interface_descriptor desc;
__u8 no_of_ep;
__u8 num_altsetting;
__u8 act_altsetting;
struct usb_endpoint_descriptor ep_desc[USB_MAXENDPOINTS];
/*
* Super Speed Device will have Super Speed Endpoint
* Companion Descriptor (section 9.6.7 of usb 3.0 spec)
* Revision 1.0 June 6th 2011
*/
struct usb_ss_ep_comp_descriptor ss_ep_comp_desc[USB_MAXENDPOINTS];
} __attribute__ ((packed));
/* Configuration information.. */
struct usb_config {
struct usb_config_descriptor desc;
__u8 no_of_if; /* number of interfaces */
struct usb_interface if_desc[USB_MAXINTERFACES];
} __attribute__ ((packed));
enum {
/* Maximum packet size; encoded as 0,1,2,3 = 8,16,32,64 */
PACKET_SIZE_8 = 0,
PACKET_SIZE_16 = 1,
PACKET_SIZE_32 = 2,
PACKET_SIZE_64 = 3,
};
/**
* struct usb_device - information about a USB device
*
* With driver model both UCLASS_USB (the USB controllers) and UCLASS_USB_HUB
* (the hubs) have this as parent data. Hubs are children of controllers or
* other hubs and there is always a single root hub for each controller.
* Therefore struct usb_device can always be accessed with
* dev_get_parent_priv(dev), where dev is a USB device.
*
* Pointers exist for obtaining both the device (could be any uclass) and
* controller (UCLASS_USB) from this structure. The controller does not have
* a struct usb_device since it is not a device.
*/
struct usb_device {
int devnum; /* Device number on USB bus */
int speed; /* full/low/high */
char mf[32]; /* manufacturer */
char prod[32]; /* product */
char serial[32]; /* serial number */
/* Maximum packet size; one of: PACKET_SIZE_* */
int maxpacketsize;
/* one bit for each endpoint ([0] = IN, [1] = OUT) */
unsigned int toggle[2];
/* endpoint halts; one bit per endpoint # & direction;
* [0] = IN, [1] = OUT
*/
unsigned int halted[2];
int epmaxpacketin[16]; /* INput endpoint specific maximums */
int epmaxpacketout[16]; /* OUTput endpoint specific maximums */
int configno; /* selected config number */
/* Device Descriptor */
struct usb_device_descriptor descriptor
__attribute__((aligned(ARCH_DMA_MINALIGN)));
struct usb_config config; /* config descriptor */
int have_langid; /* whether string_langid is valid yet */
int string_langid; /* language ID for strings */
int (*irq_handle)(struct usb_device *dev);
unsigned long irq_status;
int irq_act_len; /* transferred bytes */
void *privptr;
/*
* Child devices - if this is a hub device
* Each instance needs its own set of data structures.
*/
unsigned long status;
unsigned long int_pending; /* 1 bit per ep, used by int_queue */
int act_len; /* transferred bytes */
int maxchild; /* Number of ports if hub */
int portnr; /* Port number, 1=first */
#ifndef CONFIG_DM_USB
/* parent hub, or NULL if this is the root hub */
struct usb_device *parent;
struct usb_device *children[USB_MAXCHILDREN];
void *controller; /* hardware controller private data */
#endif
/* slot_id - for xHCI enabled devices */
unsigned int slot_id;
#ifdef CONFIG_DM_USB
struct udevice *dev; /* Pointer to associated device */
struct udevice *controller_dev; /* Pointer to associated controller */
#endif
};
struct int_queue;
/*
* You can initialize platform's USB host or device
* ports by passing this enum as an argument to
* board_usb_init().
*/
enum usb_init_type {
USB_INIT_HOST,
USB_INIT_DEVICE
};
/**********************************************************************
* this is how the lowlevel part communicate with the outer world
*/
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);
#if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_DM_USB)
int usb_reset_root_port(struct usb_device *dev);
#else
#define usb_reset_root_port(dev)
#endif
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len);
int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, struct devrequest *setup);
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval);
#if defined CONFIG_USB_EHCI_HCD || defined CONFIG_USB_MUSB_HOST \
|| defined(CONFIG_DM_USB)
struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe,
int queuesize, int elementsize, void *buffer, int interval);
int destroy_int_queue(struct usb_device *dev, struct int_queue *queue);
void *poll_int_queue(struct usb_device *dev, struct int_queue *queue);
#endif
/* Defines */
#define USB_UHCI_VEND_ID 0x8086
#define USB_UHCI_DEV_ID 0x7112
/*
* PXA25x can only act as USB device. There are drivers
* which works with USB CDC gadgets implementations.
* Some of them have common routines which can be used
* in boards init functions e.g. udc_disconnect() used for
* forced device disconnection from host.
*/
extern void udc_disconnect(void);
/*
* board-specific hardware initialization, called by
* usb drivers and u-boot commands
*
* @param index USB controller number
* @param init initializes controller as USB host or device
*/
int board_usb_init(int index, enum usb_init_type init);
/*
* can be used to clean up after failed USB initialization attempt
* vide: board_usb_init()
*
* @param index USB controller number for selective cleanup
* @param init usb_init_type passed to board_usb_init()
*/
int board_usb_cleanup(int index, enum usb_init_type init);
#ifdef CONFIG_USB_STORAGE
#define USB_MAX_STOR_DEV 7
int usb_stor_scan(int mode);
int usb_stor_info(void);
#endif
#ifdef CONFIG_USB_HOST_ETHER
#define USB_MAX_ETH_DEV 5
int usb_host_eth_scan(int mode);
#endif
#ifdef CONFIG_USB_KEYBOARD
int drv_usb_kbd_init(void);
int usb_kbd_deregister(int force);
#endif
/* routines */
int usb_init(void); /* initialize the USB Controller */
int usb_stop(void); /* stop the USB Controller */
int usb_detect_change(void); /* detect if a USB device has been (un)plugged */
int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol);
int usb_set_idle(struct usb_device *dev, int ifnum, int duration,
int report_id);
int usb_control_msg(struct usb_device *dev, unsigned int pipe,
unsigned char request, unsigned char requesttype,
unsigned short value, unsigned short index,
void *data, unsigned short size, int timeout);
int usb_bulk_msg(struct usb_device *dev, unsigned int pipe,
void *data, int len, int *actual_length, int timeout);
int usb_submit_int_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len, int interval);
int usb_disable_asynch(int disable);
int usb_maxpacket(struct usb_device *dev, unsigned long pipe);
int usb_get_configuration_no(struct usb_device *dev, int cfgno,
unsigned char *buffer, int length);
int usb_get_configuration_len(struct usb_device *dev, int cfgno);
int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
unsigned char id, void *buf, int size);
int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
unsigned char type, unsigned char id, void *buf,
int size);
int usb_clear_halt(struct usb_device *dev, int pipe);
int usb_string(struct usb_device *dev, int index, char *buf, size_t size);
int usb_set_interface(struct usb_device *dev, int interface, int alternate);
int usb_get_port_status(struct usb_device *dev, int port, void *data);
/* big endian -> little endian conversion */
/* some CPUs are already little endian e.g. the ARM920T */
#define __swap_16(x) \
({ unsigned short x_ = (unsigned short)x; \
(unsigned short)( \
((x_ & 0x00FFU) << 8) | ((x_ & 0xFF00U) >> 8)); \
})
#define __swap_32(x) \
({ unsigned long x_ = (unsigned long)x; \
(unsigned long)( \
((x_ & 0x000000FFUL) << 24) | \
((x_ & 0x0000FF00UL) << 8) | \
((x_ & 0x00FF0000UL) >> 8) | \
((x_ & 0xFF000000UL) >> 24)); \
})
#ifdef __LITTLE_ENDIAN
# define swap_16(x) (x)
# define swap_32(x) (x)
#else
# define swap_16(x) __swap_16(x)
# define swap_32(x) __swap_32(x)
#endif
/*
* Calling this entity a "pipe" is glorifying it. A USB pipe
* is something embarrassingly simple: it basically consists
* of the following information:
* - device number (7 bits)
* - endpoint number (4 bits)
* - current Data0/1 state (1 bit)
* - direction (1 bit)
* - speed (2 bits)
* - max packet size (2 bits: 8, 16, 32 or 64)
* - pipe type (2 bits: control, interrupt, bulk, isochronous)
*
* That's 18 bits. Really. Nothing more. And the USB people have
* documented these eighteen bits as some kind of glorious
* virtual data structure.
*
* Let's not fall in that trap. We'll just encode it as a simple
* unsigned int. The encoding is:
*
* - max size: bits 0-1 (00 = 8, 01 = 16, 10 = 32, 11 = 64)
* - direction: bit 7 (0 = Host-to-Device [Out],
* (1 = Device-to-Host [In])
* - device: bits 8-14
* - endpoint: bits 15-18
* - Data0/1: bit 19
* - pipe type: bits 30-31 (00 = isochronous, 01 = interrupt,
* 10 = control, 11 = bulk)
*
* Why? Because it's arbitrary, and whatever encoding we select is really
* up to us. This one happens to share a lot of bit positions with the UHCI
* specification, so that much of the uhci driver can just mask the bits
* appropriately.
*/
/* Create various pipes... */
#define create_pipe(dev,endpoint) \
(((dev)->devnum << 8) | ((endpoint) << 15) | \
(dev)->maxpacketsize)
#define default_pipe(dev) ((dev)->speed << 26)
#define usb_sndctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
create_pipe(dev, endpoint))
#define usb_rcvctrlpipe(dev, endpoint) ((PIPE_CONTROL << 30) | \
create_pipe(dev, endpoint) | \
USB_DIR_IN)
#define usb_sndisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \
create_pipe(dev, endpoint))
#define usb_rcvisocpipe(dev, endpoint) ((PIPE_ISOCHRONOUS << 30) | \
create_pipe(dev, endpoint) | \
USB_DIR_IN)
#define usb_sndbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \
create_pipe(dev, endpoint))
#define usb_rcvbulkpipe(dev, endpoint) ((PIPE_BULK << 30) | \
create_pipe(dev, endpoint) | \
USB_DIR_IN)
#define usb_sndintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \
create_pipe(dev, endpoint))
#define usb_rcvintpipe(dev, endpoint) ((PIPE_INTERRUPT << 30) | \
create_pipe(dev, endpoint) | \
USB_DIR_IN)
#define usb_snddefctrl(dev) ((PIPE_CONTROL << 30) | \
default_pipe(dev))
#define usb_rcvdefctrl(dev) ((PIPE_CONTROL << 30) | \
default_pipe(dev) | \
USB_DIR_IN)
/* The D0/D1 toggle bits */
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> ep) & 1)
#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << ep))
#define usb_settoggle(dev, ep, out, bit) ((dev)->toggle[out] = \
((dev)->toggle[out] & \
~(1 << ep)) | ((bit) << ep))
/* Endpoint halt control/status */
#define usb_endpoint_out(ep_dir) (((ep_dir >> 7) & 1) ^ 1)
#define usb_endpoint_halt(dev, ep, out) ((dev)->halted[out] |= (1 << (ep)))
#define usb_endpoint_running(dev, ep, out) ((dev)->halted[out] &= ~(1 << (ep)))
#define usb_endpoint_halted(dev, ep, out) ((dev)->halted[out] & (1 << (ep)))
#define usb_packetid(pipe) (((pipe) & USB_DIR_IN) ? USB_PID_IN : \
USB_PID_OUT)
#define usb_pipeout(pipe) ((((pipe) >> 7) & 1) ^ 1)
#define usb_pipein(pipe) (((pipe) >> 7) & 1)
#define usb_pipedevice(pipe) (((pipe) >> 8) & 0x7f)
#define usb_pipe_endpdev(pipe) (((pipe) >> 8) & 0x7ff)
#define usb_pipeendpoint(pipe) (((pipe) >> 15) & 0xf)
#define usb_pipedata(pipe) (((pipe) >> 19) & 1)
#define usb_pipetype(pipe) (((pipe) >> 30) & 3)
#define usb_pipeisoc(pipe) (usb_pipetype((pipe)) == PIPE_ISOCHRONOUS)
#define usb_pipeint(pipe) (usb_pipetype((pipe)) == PIPE_INTERRUPT)
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
#define usb_pipe_ep_index(pipe) \
usb_pipecontrol(pipe) ? (usb_pipeendpoint(pipe) * 2) : \
((usb_pipeendpoint(pipe) * 2) - \
(usb_pipein(pipe) ? 0 : 1))
/**
* struct usb_device_id - identifies USB devices for probing and hotplugging
* @match_flags: Bit mask controlling which of the other fields are used to
* match against new devices. Any field except for driver_info may be
* used, although some only make sense in conjunction with other fields.
* This is usually set by a USB_DEVICE_*() macro, which sets all
* other fields in this structure except for driver_info.
* @idVendor: USB vendor ID for a device; numbers are assigned
* by the USB forum to its members.
* @idProduct: Vendor-assigned product ID.
* @bcdDevice_lo: Low end of range of vendor-assigned product version numbers.
* This is also used to identify individual product versions, for
* a range consisting of a single device.
* @bcdDevice_hi: High end of version number range. The range of product
* versions is inclusive.
* @bDeviceClass: Class of device; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Device classes specify behavior of all
* the interfaces on a device.
* @bDeviceSubClass: Subclass of device; associated with bDeviceClass.
* @bDeviceProtocol: Protocol of device; associated with bDeviceClass.
* @bInterfaceClass: Class of interface; numbers are assigned
* by the USB forum. Products may choose to implement classes,
* or be vendor-specific. Interface classes specify behavior only
* of a given interface; other interfaces may support other classes.
* @bInterfaceSubClass: Subclass of interface; associated with bInterfaceClass.
* @bInterfaceProtocol: Protocol of interface; associated with bInterfaceClass.
* @bInterfaceNumber: Number of interface; composite devices may use
* fixed interface numbers to differentiate between vendor-specific
* interfaces.
* @driver_info: Holds information used by the driver. Usually it holds
* a pointer to a descriptor understood by the driver, or perhaps
* device flags.
*
* In most cases, drivers will create a table of device IDs by using
* USB_DEVICE(), or similar macros designed for that purpose.
* They will then export it to userspace using MODULE_DEVICE_TABLE(),
* and provide it to the USB core through their usb_driver structure.
*
* See the usb_match_id() function for information about how matches are
* performed. Briefly, you will normally use one of several macros to help
* construct these entries. Each entry you provide will either identify
* one or more specific products, or will identify a class of products
* which have agreed to behave the same. You should put the more specific
* matches towards the beginning of your table, so that driver_info can
* record quirks of specific products.
*/
struct usb_device_id {
/* which fields to match against? */
u16 match_flags;
/* Used for product specific matches; range is inclusive */
u16 idVendor;
u16 idProduct;
u16 bcdDevice_lo;
u16 bcdDevice_hi;
/* Used for device class matches */
u8 bDeviceClass;
u8 bDeviceSubClass;
u8 bDeviceProtocol;
/* Used for interface class matches */
u8 bInterfaceClass;
u8 bInterfaceSubClass;
u8 bInterfaceProtocol;
/* Used for vendor-specific interface matches */
u8 bInterfaceNumber;
/* not matched against */
ulong driver_info;
};
/* Some useful macros to use to create struct usb_device_id */
#define USB_DEVICE_ID_MATCH_VENDOR 0x0001
#define USB_DEVICE_ID_MATCH_PRODUCT 0x0002
#define USB_DEVICE_ID_MATCH_DEV_LO 0x0004
#define USB_DEVICE_ID_MATCH_DEV_HI 0x0008
#define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010
#define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020
#define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040
#define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080
#define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100
#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
#define USB_DEVICE_ID_MATCH_INT_NUMBER 0x0400
/* Match anything, indicates this is a valid entry even if everything is 0 */
#define USB_DEVICE_ID_MATCH_NONE 0x0800
#define USB_DEVICE_ID_MATCH_ALL 0x07ff
/**
* struct usb_driver_entry - Matches a driver to its usb_device_ids
* @driver: Driver to use
* @match: List of match records for this driver, terminated by {}
*/
struct usb_driver_entry {
struct driver *driver;
const struct usb_device_id *match;
};
#define USB_DEVICE_ID_MATCH_DEVICE \
(USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
/**
* USB_DEVICE - macro used to describe a specific usb device
* @vend: the 16 bit USB Vendor ID
* @prod: the 16 bit USB Product ID
*
* This macro is used to create a struct usb_device_id that matches a
* specific device.
*/
#define USB_DEVICE(vend, prod) \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
.idVendor = (vend), \
.idProduct = (prod)
#define U_BOOT_USB_DEVICE(__name, __match) \
ll_entry_declare(struct usb_driver_entry, __name, usb_driver_entry) = {\
.driver = llsym(struct driver, __name, driver), \
.match = __match, \
}
/*************************************************************************
* Hub Stuff
*/
struct usb_port_status {
unsigned short wPortStatus;
unsigned short wPortChange;
} __attribute__ ((packed));
struct usb_hub_status {
unsigned short wHubStatus;
unsigned short wHubChange;
} __attribute__ ((packed));
/*
* Hub Device descriptor
* USB Hub class device protocols
*/
#define USB_HUB_PR_FS 0 /* Full speed hub */
#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */
#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */
#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */
#define USB_HUB_PR_SS 3 /* Super speed hub */
/* Transaction Translator Think Times, in bits */
#define HUB_TTTT_8_BITS 0x00
#define HUB_TTTT_16_BITS 0x20
#define HUB_TTTT_24_BITS 0x40
#define HUB_TTTT_32_BITS 0x60
/* Hub descriptor */
struct usb_hub_descriptor {
unsigned char bLength;
unsigned char bDescriptorType;
unsigned char bNbrPorts;
unsigned short wHubCharacteristics;
unsigned char bPwrOn2PwrGood;
unsigned char bHubContrCurrent;
/* 2.0 and 3.0 hubs differ here */
union {
struct {
/* add 1 bit for hub status change; round to bytes */
__u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8];
__u8 PortPowerCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8];
} __attribute__ ((packed)) hs;
struct {
__u8 bHubHdrDecLat;
__le16 wHubDelay;
__le16 DeviceRemovable;
} __attribute__ ((packed)) ss;
} u;
} __attribute__ ((packed));
struct usb_hub_device {
struct usb_device *pusb_dev;
struct usb_hub_descriptor desc;
ulong connect_timeout; /* Device connection timeout in ms */
ulong query_delay; /* Device query delay in ms */
int overcurrent_count[USB_MAXCHILDREN]; /* Over-current counter */
int hub_depth; /* USB 3.0 hub depth */
struct usb_tt tt; /* Transaction Translator */
};
#ifdef CONFIG_DM_USB
/**
* struct usb_platdata - Platform data about a USB controller
*
* Given a USB controller (UCLASS_USB) dev this is dev_get_platdata(dev)
*/
struct usb_platdata {
enum usb_init_type init_type;
};
/**
* struct usb_dev_platdata - Platform data about a USB device
*
* Given a USB device dev this structure is dev_get_parent_platdata(dev).
* This is used by sandbox to provide emulation data also.
*
* @id: ID used to match this device
* @devnum: Device address on the USB bus
* @udev: usb-uclass internal use only do NOT use
* @strings: List of descriptor strings (for sandbox emulation purposes)
* @desc_list: List of descriptors (for sandbox emulation purposes)
*/
struct usb_dev_platdata {
struct usb_device_id id;
int devnum;
/*
* This pointer is used to pass the usb_device used in usb_scan_device,
* to get the usb descriptors before the driver is known, to the
* actual udevice once the driver is known and the udevice is created.
* This will be NULL except during probe, do NOT use.
*
* This should eventually go away.
*/
struct usb_device *udev;
#ifdef CONFIG_SANDBOX
struct usb_string *strings;
/* NULL-terminated list of descriptor pointers */
struct usb_generic_descriptor **desc_list;
#endif
int configno;
};
/**
* struct usb_bus_priv - information about the USB controller
*
* Given a USB controller (UCLASS_USB) 'dev', this is
* dev_get_uclass_priv(dev).
*
* @next_addr: Next device address to allocate minus 1. Incremented by 1
* each time a new device address is set, so this holds the
* number of devices on the bus
* @desc_before_addr: true if we can read a device descriptor before it
* has been assigned an address. For XHCI this is not possible
* so this will be false.
* @companion: True if this is a companion controller to another USB
* controller
*/
struct usb_bus_priv {
int next_addr;
bool desc_before_addr;
bool companion;
};
/**
* struct dm_usb_ops - USB controller operations
*
* This defines the operations supoorted on a USB controller. Common
* arguments are:
*
* @bus: USB bus (i.e. controller), which is in UCLASS_USB.
* @udev: USB device parent data. Controllers are not expected to need
* this, since the device address on the bus is encoded in @pipe.
* It is used for sandbox, and can be handy for debugging and
* logging.
* @pipe: An assortment of bitfields which provide address and packet
* type information. See create_pipe() above for encoding
* details
* @buffer: A buffer to use for sending/receiving. This should be
* DMA-aligned.
* @length: Buffer length in bytes
*/
struct dm_usb_ops {
/**
* control() - Send a control message
*
* Most parameters are as above.
*
* @setup: Additional setup information required by the message
*/
int (*control)(struct udevice *bus, struct usb_device *udev,
unsigned long pipe, void *buffer, int length,
struct devrequest *setup);
/**
* bulk() - Send a bulk message
*
* Parameters are as above.
*/
int (*bulk)(struct udevice *bus, struct usb_device *udev,
unsigned long pipe, void *buffer, int length);
/**
* interrupt() - Send an interrupt message
*
* Most parameters are as above.
*
* @interval: Interrupt interval
*/
int (*interrupt)(struct udevice *bus, struct usb_device *udev,
unsigned long pipe, void *buffer, int length,
int interval);
/**
* create_int_queue() - Create and queue interrupt packets
*
* Create and queue @queuesize number of interrupt usb packets of
* @elementsize bytes each. @buffer must be atleast @queuesize *
* @elementsize bytes.
*
* Note some controllers only support a queuesize of 1.
*
* @interval: Interrupt interval
*
* @return A pointer to the created interrupt queue or NULL on error
*/
struct int_queue * (*create_int_queue)(struct udevice *bus,
struct usb_device *udev, unsigned long pipe,
int queuesize, int elementsize, void *buffer,
int interval);
/**
* poll_int_queue() - Poll an interrupt queue for completed packets
*
* Poll an interrupt queue for completed packets. The return value
* points to the part of the buffer passed to create_int_queue()
* corresponding to the completed packet.
*
* @queue: queue to poll
*
* @return Pointer to the data of the first completed packet, or
* NULL if no packets are ready
*/
void * (*poll_int_queue)(struct udevice *bus, struct usb_device *udev,
struct int_queue *queue);
/**
* destroy_int_queue() - Destroy an interrupt queue
*
* Destroy an interrupt queue created by create_int_queue().
*
* @queue: queue to poll
*
* @return 0 if OK, -ve on error
*/
int (*destroy_int_queue)(struct udevice *bus, struct usb_device *udev,
struct int_queue *queue);
/**
* alloc_device() - Allocate a new device context (XHCI)
*
* Before sending packets to a new device on an XHCI bus, a device
* context must be created. If this method is not NULL it will be
* called before the device is enumerated (even before its descriptor
* is read). This should be NULL for EHCI, which does not need this.
*/
int (*alloc_device)(struct udevice *bus, struct usb_device *udev);
/**
* reset_root_port() - Reset usb root port
*/
int (*reset_root_port)(struct udevice *bus, struct usb_device *udev);
/**
* update_hub_device() - Update HCD's internal representation of hub
*
* After a hub descriptor is fetched, notify HCD so that its internal
* representation of this hub can be updated (xHCI)
*/
int (*update_hub_device)(struct udevice *bus, struct usb_device *udev);
/**
* get_max_xfer_size() - Get HCD's maximum transfer bytes
*
* The HCD may have limitation on the maximum bytes to be transferred
* in a USB transfer. USB class driver needs to be aware of this.
*/
int (*get_max_xfer_size)(struct udevice *bus, size_t *size);
};
#define usb_get_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
#define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
/**
* usb_get_dev_index() - look up a device index number
*
* Look up devices using their index number (starting at 0). This works since
* in U-Boot device addresses are allocated starting at 1 with no gaps.
*
* TODO(sjg@chromium.org): Remove this function when usb_ether.c is modified
* to work better with driver model.
*
* @bus: USB bus to check
* @index: Index number of device to find (0=first). This is just the
* device address less 1.
*/
struct usb_device *usb_get_dev_index(struct udevice *bus, int index);
/**
* usb_setup_device() - set up a device ready for use
*
* @dev: USB device pointer. This need not be a real device - it is
* common for it to just be a local variable with its ->dev
* member (i.e. @dev->dev) set to the parent device and
* dev->portnr set to the port number on the hub (1=first)
* @do_read: true to read the device descriptor before an address is set
* (should be false for XHCI buses, true otherwise)
* @parent: Parent device (either UCLASS_USB or UCLASS_USB_HUB)
* @return 0 if OK, -ve on error */
int usb_setup_device(struct usb_device *dev, bool do_read,
struct usb_device *parent);
/**
* usb_hub_is_root_hub() - Test whether a hub device is root hub or not
*
* @hub: USB hub device to test
* @return: true if the hub device is root hub, false otherwise.
*/
bool usb_hub_is_root_hub(struct udevice *hub);
/**
* usb_hub_scan() - Scan a hub and find its devices
*
* @hub: Hub device to scan
*/
int usb_hub_scan(struct udevice *hub);
/**
* usb_scan_device() - Scan a device on a bus
*
* Scan a device on a bus. It has already been detected and is ready to
* be enumerated. This may be either the root hub (@parent is a bus) or a
* normal device (@parent is a hub)
*
* @parent: Parent device
* @port: Hub port number (numbered from 1)
* @speed: USB speed to use for this device
* @devp: Returns pointer to device if all is well
* @return 0 if OK, -ve on error
*/
int usb_scan_device(struct udevice *parent, int port,
enum usb_device_speed speed, struct udevice **devp);
/**
* usb_get_bus() - Find the bus for a device
*
* Search up through parents to find the bus this device is connected to. This
* will be a device with uclass UCLASS_USB.
*
* @dev: Device to check
* @return The bus, or NULL if not found (this indicates a critical error in
* the USB stack
*/
struct udevice *usb_get_bus(struct udevice *dev);
/**
* usb_select_config() - Set up a device ready for use
*
* This function assumes that the device already has an address and a driver
* bound, and is ready to be set up.
*
* This re-reads the device and configuration descriptors and sets the
* configuration
*
* @dev: Device to set up
*/
int usb_select_config(struct usb_device *dev);
/**
* usb_child_pre_probe() - Pre-probe function for USB devices
*
* This is called on all children of hubs and USB controllers (i.e. UCLASS_USB
* and UCLASS_USB_HUB) when a new device is about to be probed. It sets up the
* device from the saved platform data and calls usb_select_config() to
* finish set up.
*
* Once this is done, the device's normal driver can take over, knowing the
* device is accessible on the USB bus.
*
* This function is for use only by the internal USB stack.
*
* @dev: Device to set up
*/
int usb_child_pre_probe(struct udevice *dev);
struct ehci_ctrl;
/**
* usb_setup_ehci_gadget() - Set up a USB device as a gadget
*
* TODO(sjg@chromium.org): Tidy this up when USB gadgets can use driver model
*
* This provides a way to tell a controller to start up as a USB device
* instead of as a host. It is untested.
*/
int usb_setup_ehci_gadget(struct ehci_ctrl **ctlrp);
/**
* usb_stor_reset() - Prepare to scan USB storage devices
*
* Empty the list of USB storage devices in preparation for scanning them.
* This must be called before a USB scan.
*/
void usb_stor_reset(void);
#else /* !CONFIG_DM_USB */
struct usb_device *usb_get_dev_index(int index);
#endif
bool usb_device_has_child_on_port(struct usb_device *parent, int port);
int usb_hub_probe(struct usb_device *dev, int ifnum);
void usb_hub_reset(void);
/*
* usb_find_usb2_hub_address_port() - Get hub address and port for TT setting
*
* Searches for the first HS hub above the given device. If a
* HS hub is found, the hub address and the port the device is
* connected to is return, as required for SPLIT transactions
*
* @param: udev full speed or low speed device
*/
void usb_find_usb2_hub_address_port(struct usb_device *udev,
uint8_t *hub_address, uint8_t *hub_port);
/**
* usb_alloc_new_device() - Allocate a new device
*
* @devp: returns a pointer of a new device structure. With driver model this
* is a device pointer, but with legacy USB this pointer is
* driver-specific.
* @return 0 if OK, -ENOSPC if we have found out of room for new devices
*/
int usb_alloc_new_device(struct udevice *controller, struct usb_device **devp);
/**
* usb_free_device() - Free a partially-inited device
*
* This is an internal function. It is used to reverse the action of
* usb_alloc_new_device() when we hit a problem during init.
*/
void usb_free_device(struct udevice *controller);
int usb_new_device(struct usb_device *dev);
int usb_alloc_device(struct usb_device *dev);
/**
* usb_update_hub_device() - Update HCD's internal representation of hub
*
* After a hub descriptor is fetched, notify HCD so that its internal
* representation of this hub can be updated.
*
* @dev: Hub device
* @return 0 if OK, -ve on error
*/
int usb_update_hub_device(struct usb_device *dev);
/**
* usb_get_max_xfer_size() - Get HCD's maximum transfer bytes
*
* The HCD may have limitation on the maximum bytes to be transferred
* in a USB transfer. USB class driver needs to be aware of this.
*
* @dev: USB device
* @size: maximum transfer bytes
* @return 0 if OK, -ve on error
*/
int usb_get_max_xfer_size(struct usb_device *dev, size_t *size);
/**
* usb_emul_setup_device() - Set up a new USB device emulation
*
* This is normally called when a new emulation device is bound. It tells
* the USB emulation uclass about the features of the emulator.
*
* @dev: Emulation device
* @maxpacketsize: Maximum packet size (e.g. PACKET_SIZE_64)
* @strings: List of USB string descriptors, terminated by a NULL
* entry
* @desc_list: List of points or USB descriptors, terminated by NULL.
* The first entry must be struct usb_device_descriptor,
* and others follow on after that.
* @return 0 if OK, -ENOSYS if not implemented, other -ve on error
*/
int usb_emul_setup_device(struct udevice *dev, int maxpacketsize,
struct usb_string *strings, void **desc_list);
/**
* usb_emul_control() - Send a control packet to an emulator
*
* @emul: Emulator device
* @udev: USB device (which the emulator is causing to appear)
* See struct dm_usb_ops for details on other parameters
* @return 0 if OK, -ve on error
*/
int usb_emul_control(struct udevice *emul, struct usb_device *udev,
unsigned long pipe, void *buffer, int length,
struct devrequest *setup);
/**
* usb_emul_bulk() - Send a bulk packet to an emulator
*
* @emul: Emulator device
* @udev: USB device (which the emulator is causing to appear)
* See struct dm_usb_ops for details on other parameters
* @return 0 if OK, -ve on error
*/
int usb_emul_bulk(struct udevice *emul, struct usb_device *udev,
unsigned long pipe, void *buffer, int length);
/**
* usb_emul_int() - Send an interrupt packet to an emulator
*
* @emul: Emulator device
* @udev: USB device (which the emulator is causing to appear)
* See struct dm_usb_ops for details on other parameters
* @return 0 if OK, -ve on error
*/
int usb_emul_int(struct udevice *emul, struct usb_device *udev,
unsigned long pipe, void *buffer, int length, int interval);
/**
* usb_emul_find() - Find an emulator for a particular device
*
* Check @pipe to find a device number on bus @bus and return it.
*
* @bus: USB bus (controller)
* @pipe: Describes pipe being used, and includes the device number
* @emulp: Returns pointer to emulator, or NULL if not found
* @return 0 if found, -ve on error
*/
int usb_emul_find(struct udevice *bus, ulong pipe, struct udevice **emulp);
/**
* usb_emul_find_for_dev() - Find an emulator for a particular device
*
* @bus: USB bus (controller)
* @dev: USB device to check
* @emulp: Returns pointer to emulator, or NULL if not found
* @return 0 if found, -ve on error
*/
int usb_emul_find_for_dev(struct udevice *dev, struct udevice **emulp);
/**
* usb_emul_reset() - Reset all emulators ready for use
*
* Clear out any address information in the emulators and make then ready for
* a new USB scan
*/
void usb_emul_reset(struct udevice *dev);
/**
* usb_show_tree() - show the USB device tree
*
* This shows a list of active USB devices along with basic information about
* each.
*/
void usb_show_tree(void);
#endif /*_USB_H_ */