u-boot/drivers/serial/serial_stm32x7.c
Patrice Chotard 776b2ddbfa serial: stm32x7: add STM32H7 support
STM32F7 and STM32H7 shares the same UART block, add
STM32H7 compatible string.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-09-22 07:40:01 -04:00

151 lines
3.5 KiB
C

/*
* (C) Copyright 2016
* Vikas Manocha, <vikas.manocha@st.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <asm/io.h>
#include <serial.h>
#include <asm/arch/stm32.h>
#include "serial_stm32x7.h"
DECLARE_GLOBAL_DATA_PTR;
static int stm32_serial_setbrg(struct udevice *dev, int baudrate)
{
struct stm32x7_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
u32 int_div, mantissa, fraction, oversampling;
int_div = DIV_ROUND_CLOSEST(plat->clock_rate, baudrate);
if (int_div < 16) {
oversampling = 8;
setbits_le32(&usart->cr1, USART_CR1_OVER8);
} else {
oversampling = 16;
clrbits_le32(&usart->cr1, USART_CR1_OVER8);
}
mantissa = (int_div / oversampling) << USART_BRR_M_SHIFT;
fraction = int_div % oversampling;
writel(mantissa | fraction, &usart->brr);
return 0;
}
static int stm32_serial_getc(struct udevice *dev)
{
struct stm32x7_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
if ((readl(&usart->sr) & USART_SR_FLAG_RXNE) == 0)
return -EAGAIN;
return readl(&usart->rd_dr);
}
static int stm32_serial_putc(struct udevice *dev, const char c)
{
struct stm32x7_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
if ((readl(&usart->sr) & USART_SR_FLAG_TXE) == 0)
return -EAGAIN;
writel(c, &usart->tx_dr);
return 0;
}
static int stm32_serial_pending(struct udevice *dev, bool input)
{
struct stm32x7_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
if (input)
return readl(&usart->sr) & USART_SR_FLAG_RXNE ? 1 : 0;
else
return readl(&usart->sr) & USART_SR_FLAG_TXE ? 0 : 1;
}
static int stm32_serial_probe(struct udevice *dev)
{
struct stm32x7_serial_platdata *plat = dev->platdata;
struct stm32_usart *const usart = plat->base;
#ifdef CONFIG_CLK
int ret;
struct clk clk;
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
return ret;
ret = clk_enable(&clk);
if (ret) {
dev_err(dev, "failed to enable clock\n");
return ret;
}
#endif
plat->clock_rate = clk_get_rate(&clk);
if (plat->clock_rate < 0) {
clk_disable(&clk);
return plat->clock_rate;
};
/* Disable usart-> disable overrun-> enable usart */
clrbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
setbits_le32(&usart->cr3, USART_CR3_OVRDIS);
setbits_le32(&usart->cr1, USART_CR1_RE | USART_CR1_TE | USART_CR1_UE);
return 0;
}
#if CONFIG_IS_ENABLED(OF_CONTROL)
static const struct udevice_id stm32_serial_id[] = {
{.compatible = "st,stm32f7-usart"},
{.compatible = "st,stm32f7-uart"},
{.compatible = "st,stm32h7-usart"},
{.compatible = "st,stm32h7-uart"},
{}
};
static int stm32_serial_ofdata_to_platdata(struct udevice *dev)
{
struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
fdt_addr_t addr;
addr = devfdt_get_addr(dev);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
plat->base = (struct stm32_usart *)addr;
return 0;
}
#endif
static const struct dm_serial_ops stm32_serial_ops = {
.putc = stm32_serial_putc,
.pending = stm32_serial_pending,
.getc = stm32_serial_getc,
.setbrg = stm32_serial_setbrg,
};
U_BOOT_DRIVER(serial_stm32) = {
.name = "serial_stm32x7",
.id = UCLASS_SERIAL,
.of_match = of_match_ptr(stm32_serial_id),
.ofdata_to_platdata = of_match_ptr(stm32_serial_ofdata_to_platdata),
.platdata_auto_alloc_size = sizeof(struct stm32x7_serial_platdata),
.ops = &stm32_serial_ops,
.probe = stm32_serial_probe,
.flags = DM_FLAG_PRE_RELOC,
};