u-boot/drivers/ata/sata_ceva.c
Yuantian Tang 79ed61e9f0 scsi: ceva: add ls1012a soc support
Make the code structure more general so that more socs can be
added easily and also remove speed limitation restriction.
Add the ls1012a sata support as well.

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
	(with and without CONFIG_OF_LIVE on zynqmp zcu102)
Reviewed-by: York Sun <york.sun@nxp.com>
2018-07-26 10:59:35 -07:00

175 lines
4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2015 - 2016 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*/
#include <common.h>
#include <dm.h>
#include <ahci.h>
#include <scsi.h>
#include <asm/io.h>
/* Vendor Specific Register Offsets */
#define AHCI_VEND_PCFG 0xA4
#define AHCI_VEND_PPCFG 0xA8
#define AHCI_VEND_PP2C 0xAC
#define AHCI_VEND_PP3C 0xB0
#define AHCI_VEND_PP4C 0xB4
#define AHCI_VEND_PP5C 0xB8
#define AHCI_VEND_AXICC 0xBc
#define AHCI_VEND_PAXIC 0xC0
#define AHCI_VEND_PTC 0xC8
/* Vendor Specific Register bit definitions */
#define PAXIC_ADBW_BW64 0x1
#define PAXIC_MAWIDD (1 << 8)
#define PAXIC_MARIDD (1 << 16)
#define PAXIC_OTL (0x4 << 20)
#define PCFG_TPSS_VAL (0x32 << 16)
#define PCFG_TPRS_VAL (0x2 << 12)
#define PCFG_PAD_VAL 0x2
#define PPCFG_TTA 0x1FFFE
#define PPCFG_PSSO_EN (1 << 28)
#define PPCFG_PSS_EN (1 << 29)
#define PPCFG_ESDF_EN (1 << 31)
#define PP2C_CIBGMN 0x0F
#define PP2C_CIBGMX (0x25 << 8)
#define PP2C_CIBGN (0x18 << 16)
#define PP2C_CINMP (0x29 << 24)
#define PP3C_CWBGMN 0x04
#define PP3C_CWBGMX (0x0B << 8)
#define PP3C_CWBGN (0x08 << 16)
#define PP3C_CWNMP (0x0F << 24)
#define PP4C_BMX 0x0a
#define PP4C_BNM (0x08 << 8)
#define PP4C_SFD (0x4a << 16)
#define PP4C_PTST (0x06 << 24)
#define PP5C_RIT 0x60216
#define PP5C_RCT (0x7f0 << 20)
#define PTC_RX_WM_VAL 0x40
#define PTC_RSVD (1 << 27)
#define PORT0_BASE 0x100
#define PORT1_BASE 0x180
/* Port Control Register Bit Definitions */
#define PORT_SCTL_SPD_GEN3 (0x3 << 4)
#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
#define PORT_SCTL_IPM (0x3 << 8)
#define PORT_BASE 0x100
#define PORT_OFFSET 0x80
#define NR_PORTS 2
#define DRV_NAME "ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2 1
/* flag bit definition */
#define FLAG_COHERENT 1
/* register config value */
#define CEVA_PHY1_CFG 0xa003fffe
#define CEVA_PHY2_CFG 0x28184d1f
#define CEVA_PHY3_CFG 0x0e081509
#define CEVA_TRANS_CFG 0x08000029
#define CEVA_AXICC_CFG 0x3fffffff
/* ecc addr-val pair */
#define ECC_DIS_ADDR_CH2 0x80000000
#define ECC_DIS_VAL_CH2 0x20140520
enum ceva_soc {
CEVA_1V84,
CEVA_LS1012A,
};
struct ceva_sata_priv {
ulong base;
enum ceva_soc soc;
ulong flag;
};
static int ceva_init_sata(struct ceva_sata_priv *priv)
{
ulong base = priv->base;
ulong tmp;
switch (priv->soc) {
case CEVA_1V84:
tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
writel(tmp, base + AHCI_VEND_PAXIC);
tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | PCFG_PAD_VAL;
writel(tmp, base + AHCI_VEND_PCFG);
tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
writel(tmp, base + AHCI_VEND_PPCFG);
tmp = PTC_RX_WM_VAL | PTC_RSVD;
writel(tmp, base + AHCI_VEND_PTC);
break;
case CEVA_LS1012A:
writel(ECC_DIS_ADDR_CH2, ECC_DIS_VAL_CH2);
writel(CEVA_PHY1_CFG, base + AHCI_VEND_PPCFG);
writel(CEVA_TRANS_CFG, base + AHCI_VEND_PTC);
if (priv->flag & FLAG_COHERENT)
writel(CEVA_AXICC_CFG, base + AHCI_VEND_AXICC);
break;
}
return 0;
}
static int sata_ceva_bind(struct udevice *dev)
{
struct udevice *scsi_dev;
return ahci_bind_scsi(dev, &scsi_dev);
}
static int sata_ceva_probe(struct udevice *dev)
{
struct ceva_sata_priv *priv = dev_get_priv(dev);
ceva_init_sata(priv);
return ahci_probe_scsi(dev, priv->base);
}
static const struct udevice_id sata_ceva_ids[] = {
{ .compatible = "ceva,ahci-1v84", .data = CEVA_1V84 },
{ .compatible = "fsl,ls1012a-ahci", .data = CEVA_LS1012A },
{ }
};
static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
{
struct ceva_sata_priv *priv = dev_get_priv(dev);
if (dev_read_bool(dev, "dma-coherent"))
priv->flag |= FLAG_COHERENT;
priv->base = dev_read_addr(dev);
if (priv->base == FDT_ADDR_T_NONE)
return -EINVAL;
priv->soc = dev_get_driver_data(dev);
return 0;
}
U_BOOT_DRIVER(ceva_host_blk) = {
.name = "ceva_sata",
.id = UCLASS_AHCI,
.of_match = sata_ceva_ids,
.bind = sata_ceva_bind,
.ops = &scsi_ops,
.priv_auto_alloc_size = sizeof(struct ceva_sata_priv),
.probe = sata_ceva_probe,
.ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
};