u-boot/board/tqc/tqm8xx/load_sernum_ethaddr.c
Wolfgang Denk 1a4596601f Add GPL-2.0+ SPDX-License-Identifier to source files
Signed-off-by: Wolfgang Denk <wd@denx.de>
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini <trini@ti.com>
2013-07-24 09:44:38 -04:00

89 lines
2.1 KiB
C

/*
* (C) Copyright 2000, 2001, 2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc8xx.h>
/*-----------------------------------------------------------------------
* Process Hardware Information Block:
*
* If we boot on a system fresh from factory, check if the Hardware
* Information Block exists and save the information it contains.
*
* The TQM8xxL / TQM82xx Hardware Information Block is defined as
* follows:
* - located in first flash bank
* - starts at offset 0x0003FFC0
* - size 0x00000040
*
* Internal structure:
* - sequence of ASCII character strings
* - fields separated by a single space character (0x20)
* - last field terminated by NUL character (0x00)
* - remaining space filled with NUL characters (0x00)
*
* Fields in Hardware Information Block:
* 1) Module Type
* 2) Serial Number
* 3) First MAC Address
* 4) Number of additional MAC addresses
*/
void load_sernum_ethaddr (void)
{
unsigned char *hwi;
unsigned char serial [CONFIG_SYS_HWINFO_SIZE];
unsigned char ethaddr[CONFIG_SYS_HWINFO_SIZE];
unsigned short ih, is, ie, part;
hwi = (unsigned char *)(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_HWINFO_OFFSET);
ih = is = ie = 0;
if (*((unsigned long *)hwi) != (unsigned long)CONFIG_SYS_HWINFO_MAGIC) {
return;
}
part = 1;
/* copy serial # / MAC address */
while ((hwi[ih] != '\0') && (ih < CONFIG_SYS_HWINFO_SIZE)) {
if (hwi[ih] < ' ' || hwi[ih] > '~') { /* ASCII strings! */
return;
}
switch (part) {
default: /* Copy serial # */
if (hwi[ih] == ' ') {
++part;
}
serial[is++] = hwi[ih];
break;
case 3: /* Copy MAC address */
if (hwi[ih] == ' ') {
++part;
break;
}
ethaddr[ie++] = hwi[ih];
if ((ie % 3) == 2)
ethaddr[ie++] = ':';
break;
}
++ih;
}
serial[is] = '\0';
if (ie && ethaddr[ie-1] == ':')
--ie;
ethaddr[ie] = '\0';
/* set serial# and ethaddr if not yet defined */
if (getenv("serial#") == NULL) {
setenv ((char *)"serial#", (char *)serial);
}
if (getenv("ethaddr") == NULL) {
setenv ((char *)"ethaddr", (char *)ethaddr);
}
}