Lokesh Vutla 7b92252370 ARM: DRA: Enable VTT regulator ... DRA7 evm REV G and later boards uses a vtt regulator for DDR3 termination and this is controlled by gpio7_11. Configuring gpio7_11. The pad A22(offset 0x3b4) is used by gpio7_11 on REV G and later boards, and left unused on previous boards, so it is safe enough to enable gpio on all DRA7 boards. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>		2014-08-25 10:48:13 -04:00
..
abb.c	arm: omap: abb: add missing include	2013-12-12 14:54:22 -05:00
boot-common.c	dra7xx_evm: Add QSPI_4 support, qspiboot build target	2014-04-17 17:24:37 -04:00
clocks-common.c	ARM: OMAP4/5: Remove dead code against CONFIG_SYS_CLOCKS_ENABLE_ALL	2014-01-24 09:34:22 -05:00
emif-common.c	ARM: DRA7: Enable software leveling for dra7	2014-08-25 10:48:13 -04:00
hwinit-common.c	ARM: DRA: Enable VTT regulator	2014-08-25 10:48:13 -04:00
lowlevel_init.S	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
Makefile	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
mem-common.c	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	2014-07-25 16:26:12 -04:00
omap-cache.c	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
pipe3-phy.c	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
pipe3-phy.h	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
reset.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sata.c	ARM: O5/dra7xx: Add SATA boot support	2014-02-19 10:47:45 -05:00
timer.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
u-boot-spl.lds	arm: make _end compiler-generated	2014-02-26 21:18:09 +01:00
utils.c	OMAP: common: consolidate fake USB ethernet MAC address creation	2014-04-17 14:39:54 -04:00
vc.c	ARM: OMAP4+: pmic: Make generic bus init and write functions	2013-06-10 08:43:09 -04:00