u-boot/include/configs/km/pg-wcom-ls102xa.h
Tom Rini 1353b25ec5 i2c: Remove CONFIG_I2C_MULTI_BUS
This functionality is part of the legacy I2C subsystem and is currently
unused anywhere.  Remove the remaining references.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00

167 lines
4.8 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2020 Hitachi Power Grids. All rights reserved.
*/
#ifndef __CONFIG_PG_WCOM_LS102XA_H
#define __CONFIG_PG_WCOM_LS102XA_H
#define CFG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR
#define CFG_SYS_INIT_RAM_SIZE OCRAM_SIZE
#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + \
CONFIG_KM_PHRAM + \
CONFIG_KM_RESERVED_PRAM) >> 10)
#define PHYS_SDRAM 0x80000000
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
#define CFG_SYS_DDR_SDRAM_BASE 0x80000000UL
#define CFG_SYS_SDRAM_BASE CFG_SYS_DDR_SDRAM_BASE
#define SPD_EEPROM_ADDRESS 0x54
/* POST memory regions test */
#define CFG_POST (CFG_SYS_POST_MEM_REGIONS)
#define CFG_POST_EXTERNAL_WORD_FUNCS
/*
* IFC Definitions
*/
/* NOR Flash Definitions */
#define CFG_SYS_FLASH_BASE 0x60000000
#define CFG_SYS_FLASH_BASE_PHYS CFG_SYS_FLASH_BASE
#define CFG_SYS_NOR0_CSPR_EXT (0x0)
#define CFG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CFG_SYS_FLASH_BASE_PHYS) | \
CSPR_PORT_SIZE_16 | \
CSPR_TE | \
CSPR_MSEL_NOR | \
CSPR_V)
#define CFG_SYS_NOR_AMASK IFC_AMASK(64 * 1024 * 1024)
#define CFG_SYS_NOR_CSOR (CSOR_NOR_AVD_TGL_PGM_EN | \
CSOR_NOR_ADM_SHIFT(0x4) | \
CSOR_NOR_NOR_MODE_ASYNC_NOR | \
CSOR_NOR_TRHZ_20 | \
CSOR_NOR_BCTLD)
#define CFG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x1) | \
FTIM0_NOR_TEADC(0x7) | \
FTIM0_NOR_TAVDS(0x0) | \
FTIM0_NOR_TEAHC(0x1))
#define CFG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x1) | \
FTIM1_NOR_TRAD_NOR(0x21) | \
FTIM1_NOR_TSEQRAD_NOR(0x21))
#define CFG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x1) | \
FTIM2_NOR_TCH(0x1) | \
FTIM2_NOR_TWPH(0x6) | \
FTIM2_NOR_TWP(0xb))
#define CFG_SYS_NOR_FTIM3 0
#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE_PHYS }
#define CFG_SYS_WRITE_SWAPPED_DATA
#define CFG_SYS_CSPR0_EXT CFG_SYS_NOR0_CSPR_EXT
#define CFG_SYS_CSPR0 CFG_SYS_NOR0_CSPR
#define CFG_SYS_AMASK0 CFG_SYS_NOR_AMASK
#define CFG_SYS_CSOR0 CFG_SYS_NOR_CSOR
#define CFG_SYS_CS0_FTIM0 CFG_SYS_NOR_FTIM0
#define CFG_SYS_CS0_FTIM1 CFG_SYS_NOR_FTIM1
#define CFG_SYS_CS0_FTIM2 CFG_SYS_NOR_FTIM2
#define CFG_SYS_CS0_FTIM3 CFG_SYS_NOR_FTIM3
/* NAND Flash Definitions */
#define CFG_SYS_NAND_BASE 0x68000000
#define CFG_SYS_NAND_BASE_PHYS CFG_SYS_NAND_BASE
#define CFG_SYS_NAND_CSPR_EXT (0x0)
#define CFG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CFG_SYS_NAND_BASE) | \
CSPR_PORT_SIZE_8 | \
CSPR_TE | \
CSPR_MSEL_NAND | \
CSPR_V)
#define CFG_SYS_NAND_AMASK IFC_AMASK(64 * 1024)
#define CFG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN \
| CSOR_NAND_ECC_DEC_EN \
| CSOR_NAND_ECC_MODE_4 \
| CSOR_NAND_RAL_3 \
| CSOR_NAND_PGS_2K \
| CSOR_NAND_SPRZ_64 \
| CSOR_NAND_PB(64) \
| CSOR_NAND_TRHZ_40 \
| CSOR_NAND_BCTLD)
#define CFG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x3) | \
FTIM0_NAND_TWP(0x8) | \
FTIM0_NAND_TWCHT(0x3) | \
FTIM0_NAND_TWH(0x5))
#define CFG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1e) | \
FTIM1_NAND_TWBE(0x1e) | \
FTIM1_NAND_TRR(0x6) | \
FTIM1_NAND_TRP(0x8))
#define CFG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x9) | \
FTIM2_NAND_TREH(0x5) | \
FTIM2_NAND_TWHRE(0x3c))
#define CFG_SYS_NAND_FTIM3 (FTIM3_NAND_TWW(0x1e))
#define CFG_SYS_CSPR1_EXT CFG_SYS_NAND_CSPR_EXT
#define CFG_SYS_CSPR1 CFG_SYS_NAND_CSPR
#define CFG_SYS_AMASK1 CFG_SYS_NAND_AMASK
#define CFG_SYS_CSOR1 CFG_SYS_NAND_CSOR
#define CFG_SYS_CS1_FTIM0 CFG_SYS_NAND_FTIM0
#define CFG_SYS_CS1_FTIM1 CFG_SYS_NAND_FTIM1
#define CFG_SYS_CS1_FTIM2 CFG_SYS_NAND_FTIM2
#define CFG_SYS_CS1_FTIM3 CFG_SYS_NAND_FTIM3
#define CFG_SYS_NAND_BASE_LIST { CFG_SYS_NAND_BASE }
/* QRIO FPGA Definitions */
#define CFG_SYS_QRIO_BASE 0x70000000
#define CFG_SYS_QRIO_BASE_PHYS CFG_SYS_QRIO_BASE
#define CFG_SYS_CSPR2_EXT (0x00)
#define CFG_SYS_CSPR2 (CSPR_PHYS_ADDR(CFG_SYS_QRIO_BASE) | \
CSPR_PORT_SIZE_8 | \
CSPR_TE | \
CSPR_MSEL_GPCM | \
CSPR_V)
#define CFG_SYS_AMASK2 IFC_AMASK(64 * 1024)
#define CFG_SYS_CSOR2 (CSOR_GPCM_ADM_SHIFT(0x4) | \
CSOR_GPCM_TRHZ_20 | \
CSOR_GPCM_BCTLD)
#define CFG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x2) | \
FTIM0_GPCM_TEADC(0x8) | \
FTIM0_GPCM_TEAHC(0x2))
#define CFG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x2) | \
FTIM1_GPCM_TRAD(0x6))
#define CFG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x1) | \
FTIM2_GPCM_TCH(0x1) | \
FTIM2_GPCM_TWP(0x7))
#define CFG_SYS_CS2_FTIM3 0x04000000
/*
* Serial Port
*/
#define CFG_SYS_NS16550_CLK get_serial_clock()
/*
* I2C
*/
#define CFG_SYS_I2C_MAX_HOPS 1
#define CFG_SYS_NUM_I2C_BUSES 3
#define I2C_MUX_PCA_ADDR 0x70
#define I2C_MUX_CH_DEFAULT 0x0
#define CFG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
{0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \
{1, {I2C_NULL_HOP} }, \
}
#define CONFIG_SMP_PEN_ADDR 0x01ee0200
#define HWCONFIG_BUFFER_SIZE 256
#define CFG_SYS_BOOTMAPSZ (256 << 20) /* Increase map for Linux */
#endif