mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-24 21:54:01 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
387 lines
10 KiB
C
387 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* SanDisk Sansa Fuze Plus board
|
|
*
|
|
* Copyright (C) 2013 Marek Vasut <marex@denx.de>
|
|
*
|
|
* Hardware investigation done by:
|
|
*
|
|
* Amaury Pouly <amaury.pouly@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/iomux-mx23.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Functions
|
|
*/
|
|
int board_early_init_f(void)
|
|
{
|
|
/* IO0 clock at 480MHz */
|
|
mxs_set_ioclk(MXC_IOCLK0, 480000);
|
|
|
|
/* SSP0 clock at 96MHz */
|
|
mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
return mxs_dram_init();
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_MMC
|
|
static int xfi3_mmc_cd(int id)
|
|
{
|
|
switch (id) {
|
|
case 0:
|
|
/* The SSP_DETECT is inverted on this board. */
|
|
return gpio_get_value(MX23_PAD_SSP1_DETECT__GPIO_2_1);
|
|
case 1:
|
|
/* Internal eMMC always present */
|
|
return 1;
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
int ret;
|
|
|
|
/* MicroSD slot */
|
|
gpio_direction_input(MX23_PAD_SSP1_DETECT__GPIO_2_1);
|
|
gpio_direction_output(MX23_PAD_GPMI_D08__GPIO_0_8, 0);
|
|
ret = mxsmmc_initialize(bis, 0, NULL, xfi3_mmc_cd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Internal eMMC */
|
|
gpio_direction_output(MX23_PAD_PWM3__GPIO_1_29, 0);
|
|
ret = mxsmmc_initialize(bis, 1, NULL, xfi3_mmc_cd);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_VIDEO_MXS
|
|
#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
|
|
const iomux_cfg_t iomux_lcd_gpio[] = {
|
|
MX23_PAD_LCD_D00__GPIO_1_0 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D01__GPIO_1_1 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D02__GPIO_1_2 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D03__GPIO_1_3 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D04__GPIO_1_4 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D05__GPIO_1_5 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D06__GPIO_1_6 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D07__GPIO_1_7 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D08__GPIO_1_8 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D09__GPIO_1_9 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D10__GPIO_1_10 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D11__GPIO_1_11 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D12__GPIO_1_12 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D13__GPIO_1_13 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D14__GPIO_1_14 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D15__GPIO_1_15 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D16__GPIO_1_16 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D17__GPIO_1_17 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_RESET__GPIO_1_18 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_RS__GPIO_1_19 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_WR__GPIO_1_20 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_CS__GPIO_1_21 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_ENABLE__GPIO_1_23 | MUX_CONFIG_LCD,
|
|
};
|
|
|
|
const iomux_cfg_t iomux_lcd_lcd[] = {
|
|
MX23_PAD_LCD_D00__LCD_D00 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D01__LCD_D01 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D02__LCD_D02 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D03__LCD_D03 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D04__LCD_D04 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D05__LCD_D05 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D06__LCD_D06 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D07__LCD_D07 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D08__LCD_D08 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D09__LCD_D09 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_RESET__LCD_RESET | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_RS__LCD_RS | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_WR__LCD_WR | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_ENABLE__LCD_ENABLE | MUX_CONFIG_LCD,
|
|
MX23_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
|
|
};
|
|
|
|
static int mxsfb_read_register(uint32_t reg, uint32_t *value)
|
|
{
|
|
iomux_cfg_t mux;
|
|
uint32_t val = 0;
|
|
int i;
|
|
|
|
/* Mangle the register offset. */
|
|
reg = ((reg & 0xff) << 1) | (((reg >> 8) & 0xff) << 10);
|
|
|
|
/*
|
|
* The SmartLCD interface on MX233 can only do WRITE operation
|
|
* via the LCDIF controller. Implement the READ operation by
|
|
* fiddling with bits.
|
|
*/
|
|
mxs_iomux_setup_multiple_pads(iomux_lcd_gpio,
|
|
ARRAY_SIZE(iomux_lcd_gpio));
|
|
|
|
gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 1);
|
|
gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 1);
|
|
gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 1);
|
|
gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
|
|
|
|
for (i = 0; i < 18; i++) {
|
|
mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
|
|
gpio_direction_output(mux, 0);
|
|
}
|
|
|
|
udelay(2);
|
|
gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 0);
|
|
udelay(1);
|
|
gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 0);
|
|
udelay(1);
|
|
gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 0);
|
|
udelay(1);
|
|
|
|
for (i = 0; i < 18; i++) {
|
|
mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
|
|
gpio_direction_output(mux, (reg >> i) & 1);
|
|
}
|
|
udelay(1);
|
|
|
|
gpio_direction_output(MX23_PAD_LCD_WR__GPIO_1_20, 1);
|
|
udelay(3);
|
|
|
|
for (i = 0; i < 18; i++) {
|
|
mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
|
|
gpio_direction_input(mux);
|
|
}
|
|
udelay(2);
|
|
|
|
gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 0);
|
|
udelay(1);
|
|
gpio_direction_output(MX23_PAD_LCD_RS__GPIO_1_19, 1);
|
|
udelay(1);
|
|
gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
|
|
udelay(3);
|
|
gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 0);
|
|
udelay(2);
|
|
|
|
for (i = 0; i < 18; i++) {
|
|
mux = MXS_IOMUX_PAD_NAKED(1, i, PAD_MUXSEL_GPIO);
|
|
val |= !!gpio_get_value(mux) << i;
|
|
}
|
|
udelay(1);
|
|
|
|
gpio_direction_output(MX23_PAD_LCD_ENABLE__GPIO_1_23, 1);
|
|
udelay(1);
|
|
gpio_direction_output(MX23_PAD_LCD_CS__GPIO_1_21, 1);
|
|
udelay(1);
|
|
|
|
mxs_iomux_setup_multiple_pads(iomux_lcd_lcd,
|
|
ARRAY_SIZE(iomux_lcd_lcd));
|
|
|
|
/* Demangle the register value. */
|
|
*value = ((val >> 1) & 0xff) | ((val >> 2) & 0xff00);
|
|
|
|
writel(val, 0x2000);
|
|
return 0;
|
|
}
|
|
|
|
static int mxsfb_write_byte(uint32_t payload, const unsigned int data)
|
|
{
|
|
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
|
|
const unsigned int timeout = 0x10000;
|
|
|
|
/* What is going on here I do not know. FIXME */
|
|
payload = ((payload & 0xff) << 1) | (((payload >> 8) & 0xff) << 10);
|
|
|
|
if (mxs_wait_mask_clr(®s->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
|
|
timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
writel((1 << LCDIF_TRANSFER_COUNT_V_COUNT_OFFSET) |
|
|
(1 << LCDIF_TRANSFER_COUNT_H_COUNT_OFFSET),
|
|
®s->hw_lcdif_transfer_count);
|
|
|
|
writel(LCDIF_CTRL_DATA_SELECT | LCDIF_CTRL_RUN,
|
|
®s->hw_lcdif_ctrl_clr);
|
|
|
|
if (data)
|
|
writel(LCDIF_CTRL_DATA_SELECT, ®s->hw_lcdif_ctrl_set);
|
|
|
|
writel(LCDIF_CTRL_RUN, ®s->hw_lcdif_ctrl_set);
|
|
|
|
if (mxs_wait_mask_clr(®s->hw_lcdif_lcdif_stat_reg, 1 << 29,
|
|
timeout))
|
|
return -ETIMEDOUT;
|
|
|
|
writel(payload, ®s->hw_lcdif_data);
|
|
return mxs_wait_mask_clr(®s->hw_lcdif_ctrl_reg, LCDIF_CTRL_RUN,
|
|
timeout);
|
|
}
|
|
|
|
static void mxsfb_write_register(uint32_t reg, uint32_t data)
|
|
{
|
|
mxsfb_write_byte(reg, 0);
|
|
mxsfb_write_byte(data, 1);
|
|
}
|
|
|
|
static const struct {
|
|
uint8_t reg;
|
|
uint8_t delay;
|
|
uint16_t val;
|
|
} lcd_regs[] = {
|
|
{ 0xe5, 0 , 0x78f0 },
|
|
{ 0xe3, 0 , 0x3008 },
|
|
{ 0xe7, 0 , 0x0012 },
|
|
{ 0xef, 0 , 0x1231 },
|
|
{ 0x00, 0 , 0x0001 },
|
|
{ 0x01, 0 , 0x0100 },
|
|
{ 0x02, 0 , 0x0700 },
|
|
{ 0x03, 0 , 0x1030 },
|
|
{ 0x04, 0 , 0x0000 },
|
|
{ 0x08, 0 , 0x0207 },
|
|
{ 0x09, 0 , 0x0000 },
|
|
{ 0x0a, 0 , 0x0000 },
|
|
{ 0x0c, 0 , 0x0000 },
|
|
{ 0x0d, 0 , 0x0000 },
|
|
{ 0x0f, 0 , 0x0000 },
|
|
{ 0x10, 0 , 0x0000 },
|
|
{ 0x11, 0 , 0x0007 },
|
|
{ 0x12, 0 , 0x0000 },
|
|
{ 0x13, 20 , 0x0000 },
|
|
/* Wait 20 mS here. */
|
|
{ 0x10, 0 , 0x1290 },
|
|
{ 0x11, 50 , 0x0007 },
|
|
/* Wait 50 mS here. */
|
|
{ 0x12, 50 , 0x0019 },
|
|
/* Wait 50 mS here. */
|
|
{ 0x13, 0 , 0x1700 },
|
|
{ 0x29, 50 , 0x0014 },
|
|
/* Wait 50 mS here. */
|
|
{ 0x20, 0 , 0x0000 },
|
|
{ 0x21, 0 , 0x0000 },
|
|
{ 0x30, 0 , 0x0504 },
|
|
{ 0x31, 0 , 0x0007 },
|
|
{ 0x32, 0 , 0x0006 },
|
|
{ 0x35, 0 , 0x0106 },
|
|
{ 0x36, 0 , 0x0202 },
|
|
{ 0x37, 0 , 0x0504 },
|
|
{ 0x38, 0 , 0x0500 },
|
|
{ 0x39, 0 , 0x0706 },
|
|
{ 0x3c, 0 , 0x0204 },
|
|
{ 0x3d, 0 , 0x0202 },
|
|
{ 0x50, 0 , 0x0000 },
|
|
{ 0x51, 0 , 0x00ef },
|
|
{ 0x52, 0 , 0x0000 },
|
|
{ 0x53, 0 , 0x013f },
|
|
{ 0x60, 0 , 0xa700 },
|
|
{ 0x61, 0 , 0x0001 },
|
|
{ 0x6a, 0 , 0x0000 },
|
|
{ 0x2b, 50 , 0x000d },
|
|
/* Wait 50 mS here. */
|
|
{ 0x90, 0 , 0x0011 },
|
|
{ 0x92, 0 , 0x0600 },
|
|
{ 0x93, 0 , 0x0003 },
|
|
{ 0x95, 0 , 0x0110 },
|
|
{ 0x97, 0 , 0x0000 },
|
|
{ 0x98, 0 , 0x0000 },
|
|
{ 0x07, 0 , 0x0173 },
|
|
};
|
|
|
|
void board_mxsfb_system_setup(void)
|
|
{
|
|
struct mxs_lcdif_regs *regs = (struct mxs_lcdif_regs *)MXS_LCDIF_BASE;
|
|
uint32_t id;
|
|
int i;
|
|
|
|
/* Switch the LCDIF into System-Mode */
|
|
writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DOTCLK_MODE |
|
|
LCDIF_CTRL_BYPASS_COUNT, ®s->hw_lcdif_ctrl_clr);
|
|
|
|
/* To program the LCD, switch to 18bit bus + 18bit data. */
|
|
clrsetbits_le32(®s->hw_lcdif_ctrl,
|
|
LCDIF_CTRL_WORD_LENGTH_MASK | LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK,
|
|
LCDIF_CTRL_WORD_LENGTH_18BIT |
|
|
LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT);
|
|
|
|
mxsfb_read_register(0, &id);
|
|
writel(id, 0x2004);
|
|
|
|
/* Restart the SmartLCD controller */
|
|
mdelay(50);
|
|
writel(1, ®s->hw_lcdif_ctrl1_set);
|
|
mdelay(50);
|
|
writel(1, ®s->hw_lcdif_ctrl1_clr);
|
|
mdelay(50);
|
|
writel(1, ®s->hw_lcdif_ctrl1_set);
|
|
mdelay(50);
|
|
|
|
/* Program the SmartLCD controller */
|
|
writel(LCDIF_CTRL1_RECOVER_ON_UNDERFLOW, ®s->hw_lcdif_ctrl1_set);
|
|
|
|
writel((0x02 << LCDIF_TIMING_CMD_HOLD_OFFSET) |
|
|
(0x02 << LCDIF_TIMING_CMD_SETUP_OFFSET) |
|
|
(0x02 << LCDIF_TIMING_DATA_HOLD_OFFSET) |
|
|
(0x01 << LCDIF_TIMING_DATA_SETUP_OFFSET),
|
|
®s->hw_lcdif_timing);
|
|
|
|
/*
|
|
* ILI9325 init and configuration sequence.
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(lcd_regs); i++) {
|
|
mxsfb_write_register(lcd_regs[i].reg, lcd_regs[i].val);
|
|
if (lcd_regs[i].delay)
|
|
mdelay(lcd_regs[i].delay);
|
|
}
|
|
/* Turn on Framebuffer Upload Mode */
|
|
mxsfb_write_byte(0x22, 0);
|
|
|
|
writel(LCDIF_CTRL_LCDIF_MASTER | LCDIF_CTRL_DATA_SELECT,
|
|
®s->hw_lcdif_ctrl_set);
|
|
|
|
/* Operate the framebuffer in 16bit mode. */
|
|
clrsetbits_le32(®s->hw_lcdif_ctrl,
|
|
LCDIF_CTRL_WORD_LENGTH_MASK | LCDIF_CTRL_LCD_DATABUS_WIDTH_MASK,
|
|
LCDIF_CTRL_WORD_LENGTH_16BIT |
|
|
LCDIF_CTRL_LCD_DATABUS_WIDTH_18BIT);
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Adress of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
/* Turn on PWM backlight */
|
|
gpio_direction_output(MX23_PAD_PWM2__GPIO_1_28, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
usb_eth_initialize(bis);
|
|
return 0;
|
|
}
|