mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
654 lines
17 KiB
C
654 lines
17 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
* Copyright (C) 2008 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
* port from libata of linux kernel
|
|
*/
|
|
|
|
#ifndef __LIBATA_H__
|
|
#define __LIBATA_H__
|
|
|
|
#include <common.h>
|
|
|
|
enum {
|
|
/* various global constants */
|
|
ATA_MAX_DEVICES = 2, /* per bus/port */
|
|
ATA_MAX_PRD = 256, /* we could make these 256/256 */
|
|
ATA_SECT_SIZE = 512,
|
|
ATA_MAX_SECTORS_128 = 128,
|
|
ATA_MAX_SECTORS = 256,
|
|
ATA_MAX_SECTORS_LBA48 = 65535,
|
|
ATA_MAX_SECTORS_TAPE = 65535,
|
|
|
|
ATA_ID_WORDS = 256,
|
|
ATA_ID_SERNO = 10,
|
|
ATA_ID_FW_REV = 23,
|
|
ATA_ID_PROD = 27,
|
|
ATA_ID_OLD_PIO_MODES = 51,
|
|
ATA_ID_FIELD_VALID = 53,
|
|
ATA_ID_LBA_SECTORS = 60,
|
|
ATA_ID_MWDMA_MODES = 63,
|
|
ATA_ID_PIO_MODES = 64,
|
|
ATA_ID_EIDE_DMA_MIN = 65,
|
|
ATA_ID_EIDE_PIO = 67,
|
|
ATA_ID_EIDE_PIO_IORDY = 68,
|
|
ATA_ID_PIO4 = (1 << 1),
|
|
ATA_ID_QUEUE_DEPTH = 75,
|
|
ATA_ID_SATA_CAP = 76,
|
|
ATA_ID_SATA_FEATURES = 78,
|
|
ATA_ID_SATA_FEATURES_EN = 79,
|
|
ATA_ID_MAJOR_VER = 80,
|
|
ATA_ID_MINOR_VER = 81,
|
|
ATA_ID_UDMA_MODES = 88,
|
|
ATA_ID_LBA48_SECTORS = 100,
|
|
|
|
ATA_ID_SERNO_LEN = 20,
|
|
ATA_ID_FW_REV_LEN = 8,
|
|
ATA_ID_PROD_LEN = 40,
|
|
|
|
ATA_PCI_CTL_OFS = 2,
|
|
|
|
ATA_PIO0 = (1 << 0),
|
|
ATA_PIO1 = ATA_PIO0 | (1 << 1),
|
|
ATA_PIO2 = ATA_PIO1 | (1 << 2),
|
|
ATA_PIO3 = ATA_PIO2 | (1 << 3),
|
|
ATA_PIO4 = ATA_PIO3 | (1 << 4),
|
|
ATA_PIO5 = ATA_PIO4 | (1 << 5),
|
|
ATA_PIO6 = ATA_PIO5 | (1 << 6),
|
|
|
|
ATA_SWDMA0 = (1 << 0),
|
|
ATA_SWDMA1 = ATA_SWDMA0 | (1 << 1),
|
|
ATA_SWDMA2 = ATA_SWDMA1 | (1 << 2),
|
|
|
|
ATA_SWDMA2_ONLY = (1 << 2),
|
|
|
|
ATA_MWDMA0 = (1 << 0),
|
|
ATA_MWDMA1 = ATA_MWDMA0 | (1 << 1),
|
|
ATA_MWDMA2 = ATA_MWDMA1 | (1 << 2),
|
|
|
|
ATA_MWDMA12_ONLY = (1 << 1) | (1 << 2),
|
|
ATA_MWDMA2_ONLY = (1 << 2),
|
|
|
|
ATA_UDMA0 = (1 << 0),
|
|
ATA_UDMA1 = ATA_UDMA0 | (1 << 1),
|
|
ATA_UDMA2 = ATA_UDMA1 | (1 << 2),
|
|
ATA_UDMA3 = ATA_UDMA2 | (1 << 3),
|
|
ATA_UDMA4 = ATA_UDMA3 | (1 << 4),
|
|
ATA_UDMA5 = ATA_UDMA4 | (1 << 5),
|
|
ATA_UDMA6 = ATA_UDMA5 | (1 << 6),
|
|
ATA_UDMA7 = ATA_UDMA6 | (1 << 7),
|
|
/* ATA_UDMA7 is just for completeness... doesn't exist (yet?). */
|
|
|
|
ATA_UDMA_MASK_40C = ATA_UDMA2, /* udma0-2 */
|
|
|
|
/* DMA-related */
|
|
ATA_PRD_SZ = 8,
|
|
ATA_PRD_TBL_SZ = (ATA_MAX_PRD * ATA_PRD_SZ),
|
|
ATA_PRD_EOT = (1 << 31), /* end-of-table flag */
|
|
|
|
ATA_DMA_TABLE_OFS = 4,
|
|
ATA_DMA_STATUS = 2,
|
|
ATA_DMA_CMD = 0,
|
|
ATA_DMA_WR = (1 << 3),
|
|
ATA_DMA_START = (1 << 0),
|
|
ATA_DMA_INTR = (1 << 2),
|
|
ATA_DMA_ERR = (1 << 1),
|
|
ATA_DMA_ACTIVE = (1 << 0),
|
|
|
|
/* bits in ATA command block registers */
|
|
ATA_HOB = (1 << 7), /* LBA48 selector */
|
|
ATA_NIEN = (1 << 1), /* disable-irq flag */
|
|
ATA_LBA = (1 << 6), /* LBA28 selector */
|
|
ATA_DEV1 = (1 << 4), /* Select Device 1 (slave) */
|
|
ATA_DEVICE_OBS = (1 << 7) | (1 << 5), /* obs bits in dev reg */
|
|
ATA_DEVCTL_OBS = (1 << 3), /* obsolete bit in devctl reg */
|
|
ATA_BUSY = (1 << 7), /* BSY status bit */
|
|
ATA_DRDY = (1 << 6), /* device ready */
|
|
ATA_DF = (1 << 5), /* device fault */
|
|
ATA_DRQ = (1 << 3), /* data request i/o */
|
|
ATA_ERR = (1 << 0), /* have an error */
|
|
ATA_SRST = (1 << 2), /* software reset */
|
|
ATA_ICRC = (1 << 7), /* interface CRC error */
|
|
ATA_UNC = (1 << 6), /* uncorrectable media error */
|
|
ATA_IDNF = (1 << 4), /* ID not found */
|
|
ATA_ABORTED = (1 << 2), /* command aborted */
|
|
|
|
/* ATA command block registers */
|
|
ATA_REG_DATA = 0x00,
|
|
ATA_REG_ERR = 0x01,
|
|
ATA_REG_NSECT = 0x02,
|
|
ATA_REG_LBAL = 0x03,
|
|
ATA_REG_LBAM = 0x04,
|
|
ATA_REG_LBAH = 0x05,
|
|
ATA_REG_DEVICE = 0x06,
|
|
ATA_REG_STATUS = 0x07,
|
|
|
|
ATA_REG_FEATURE = ATA_REG_ERR, /* and their aliases */
|
|
ATA_REG_CMD = ATA_REG_STATUS,
|
|
ATA_REG_BYTEL = ATA_REG_LBAM,
|
|
ATA_REG_BYTEH = ATA_REG_LBAH,
|
|
ATA_REG_DEVSEL = ATA_REG_DEVICE,
|
|
ATA_REG_IRQ = ATA_REG_NSECT,
|
|
|
|
/* ATA device commands */
|
|
ATA_CMD_DEV_RESET = 0x08, /* ATAPI device reset */
|
|
ATA_CMD_CHK_POWER = 0xE5, /* check power mode */
|
|
ATA_CMD_STANDBY = 0xE2, /* place in standby power mode */
|
|
ATA_CMD_IDLE = 0xE3, /* place in idle power mode */
|
|
ATA_CMD_EDD = 0x90, /* execute device diagnostic */
|
|
ATA_CMD_FLUSH = 0xE7,
|
|
ATA_CMD_FLUSH_EXT = 0xEA,
|
|
ATA_CMD_ID_ATA = 0xEC,
|
|
ATA_CMD_ID_ATAPI = 0xA1,
|
|
ATA_CMD_READ = 0xC8,
|
|
ATA_CMD_READ_EXT = 0x25,
|
|
ATA_CMD_WRITE = 0xCA,
|
|
ATA_CMD_WRITE_EXT = 0x35,
|
|
ATA_CMD_WRITE_FUA_EXT = 0x3D,
|
|
ATA_CMD_FPDMA_READ = 0x60,
|
|
ATA_CMD_FPDMA_WRITE = 0x61,
|
|
ATA_CMD_PIO_READ = 0x20,
|
|
ATA_CMD_PIO_READ_EXT = 0x24,
|
|
ATA_CMD_PIO_WRITE = 0x30,
|
|
ATA_CMD_PIO_WRITE_EXT = 0x34,
|
|
ATA_CMD_READ_MULTI = 0xC4,
|
|
ATA_CMD_READ_MULTI_EXT = 0x29,
|
|
ATA_CMD_WRITE_MULTI = 0xC5,
|
|
ATA_CMD_WRITE_MULTI_EXT = 0x39,
|
|
ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE,
|
|
ATA_CMD_SET_FEATURES = 0xEF,
|
|
ATA_CMD_SET_MULTI = 0xC6,
|
|
ATA_CMD_PACKET = 0xA0,
|
|
ATA_CMD_VERIFY = 0x40,
|
|
ATA_CMD_VERIFY_EXT = 0x42,
|
|
ATA_CMD_STANDBYNOW1 = 0xE0,
|
|
ATA_CMD_IDLEIMMEDIATE = 0xE1,
|
|
ATA_CMD_SLEEP = 0xE6,
|
|
ATA_CMD_INIT_DEV_PARAMS = 0x91,
|
|
ATA_CMD_READ_NATIVE_MAX = 0xF8,
|
|
ATA_CMD_READ_NATIVE_MAX_EXT = 0x27,
|
|
ATA_CMD_SET_MAX = 0xF9,
|
|
ATA_CMD_SET_MAX_EXT = 0x37,
|
|
ATA_CMD_READ_LOG_EXT = 0x2f,
|
|
ATA_CMD_PMP_READ = 0xE4,
|
|
ATA_CMD_PMP_WRITE = 0xE8,
|
|
ATA_CMD_CONF_OVERLAY = 0xB1,
|
|
ATA_CMD_SEC_FREEZE_LOCK = 0xF5,
|
|
|
|
/* READ_LOG_EXT pages */
|
|
ATA_LOG_SATA_NCQ = 0x10,
|
|
|
|
/* READ/WRITE LONG (obsolete) */
|
|
ATA_CMD_READ_LONG = 0x22,
|
|
ATA_CMD_READ_LONG_ONCE = 0x23,
|
|
ATA_CMD_WRITE_LONG = 0x32,
|
|
ATA_CMD_WRITE_LONG_ONCE = 0x33,
|
|
|
|
/* SETFEATURES stuff */
|
|
SETFEATURES_XFER = 0x03,
|
|
XFER_UDMA_7 = 0x47,
|
|
XFER_UDMA_6 = 0x46,
|
|
XFER_UDMA_5 = 0x45,
|
|
XFER_UDMA_4 = 0x44,
|
|
XFER_UDMA_3 = 0x43,
|
|
XFER_UDMA_2 = 0x42,
|
|
XFER_UDMA_1 = 0x41,
|
|
XFER_UDMA_0 = 0x40,
|
|
XFER_MW_DMA_4 = 0x24, /* CFA only */
|
|
XFER_MW_DMA_3 = 0x23, /* CFA only */
|
|
XFER_MW_DMA_2 = 0x22,
|
|
XFER_MW_DMA_1 = 0x21,
|
|
XFER_MW_DMA_0 = 0x20,
|
|
XFER_SW_DMA_2 = 0x12,
|
|
XFER_SW_DMA_1 = 0x11,
|
|
XFER_SW_DMA_0 = 0x10,
|
|
XFER_PIO_6 = 0x0E, /* CFA only */
|
|
XFER_PIO_5 = 0x0D, /* CFA only */
|
|
XFER_PIO_4 = 0x0C,
|
|
XFER_PIO_3 = 0x0B,
|
|
XFER_PIO_2 = 0x0A,
|
|
XFER_PIO_1 = 0x09,
|
|
XFER_PIO_0 = 0x08,
|
|
XFER_PIO_SLOW = 0x00,
|
|
|
|
SETFEATURES_WC_ON = 0x02, /* Enable write cache */
|
|
SETFEATURES_WC_OFF = 0x82, /* Disable write cache */
|
|
|
|
SETFEATURES_SPINUP = 0x07, /* Spin-up drive */
|
|
|
|
SETFEATURES_SATA_ENABLE = 0x10, /* Enable use of SATA feature */
|
|
SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
|
|
|
|
/* SETFEATURE Sector counts for SATA features */
|
|
SATA_AN = 0x05, /* Asynchronous Notification */
|
|
SATA_DIPM = 0x03, /* Device Initiated Power Management */
|
|
|
|
/* feature values for SET_MAX */
|
|
ATA_SET_MAX_ADDR = 0x00,
|
|
ATA_SET_MAX_PASSWD = 0x01,
|
|
ATA_SET_MAX_LOCK = 0x02,
|
|
ATA_SET_MAX_UNLOCK = 0x03,
|
|
ATA_SET_MAX_FREEZE_LOCK = 0x04,
|
|
|
|
/* feature values for DEVICE CONFIGURATION OVERLAY */
|
|
ATA_DCO_RESTORE = 0xC0,
|
|
ATA_DCO_FREEZE_LOCK = 0xC1,
|
|
ATA_DCO_IDENTIFY = 0xC2,
|
|
ATA_DCO_SET = 0xC3,
|
|
|
|
/* ATAPI stuff */
|
|
ATAPI_PKT_DMA = (1 << 0),
|
|
ATAPI_DMADIR = (1 << 2), /* ATAPI data dir:
|
|
0=to device, 1=to host */
|
|
ATAPI_CDB_LEN = 16,
|
|
|
|
/* PMP stuff */
|
|
SATA_PMP_MAX_PORTS = 15,
|
|
SATA_PMP_CTRL_PORT = 15,
|
|
|
|
SATA_PMP_GSCR_DWORDS = 128,
|
|
SATA_PMP_GSCR_PROD_ID = 0,
|
|
SATA_PMP_GSCR_REV = 1,
|
|
SATA_PMP_GSCR_PORT_INFO = 2,
|
|
SATA_PMP_GSCR_ERROR = 32,
|
|
SATA_PMP_GSCR_ERROR_EN = 33,
|
|
SATA_PMP_GSCR_FEAT = 64,
|
|
SATA_PMP_GSCR_FEAT_EN = 96,
|
|
|
|
SATA_PMP_PSCR_STATUS = 0,
|
|
SATA_PMP_PSCR_ERROR = 1,
|
|
SATA_PMP_PSCR_CONTROL = 2,
|
|
|
|
SATA_PMP_FEAT_BIST = (1 << 0),
|
|
SATA_PMP_FEAT_PMREQ = (1 << 1),
|
|
SATA_PMP_FEAT_DYNSSC = (1 << 2),
|
|
SATA_PMP_FEAT_NOTIFY = (1 << 3),
|
|
|
|
/* cable types */
|
|
ATA_CBL_NONE = 0,
|
|
ATA_CBL_PATA40 = 1,
|
|
ATA_CBL_PATA80 = 2,
|
|
ATA_CBL_PATA40_SHORT = 3, /* 40 wire cable to high UDMA spec */
|
|
ATA_CBL_PATA_UNK = 4, /* don't know, maybe 80c? */
|
|
ATA_CBL_PATA_IGN = 5, /* don't know, ignore cable handling */
|
|
ATA_CBL_SATA = 6,
|
|
|
|
/* SATA Status and Control Registers */
|
|
SCR_STATUS = 0,
|
|
SCR_ERROR = 1,
|
|
SCR_CONTROL = 2,
|
|
SCR_ACTIVE = 3,
|
|
SCR_NOTIFICATION = 4,
|
|
|
|
/* SError bits */
|
|
SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */
|
|
SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */
|
|
SERR_DATA = (1 << 8), /* unrecovered data error */
|
|
SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */
|
|
SERR_PROTOCOL = (1 << 10), /* protocol violation */
|
|
SERR_INTERNAL = (1 << 11), /* host internal error */
|
|
SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
|
|
SERR_PHY_INT_ERR = (1 << 17), /* PHY internal error */
|
|
SERR_COMM_WAKE = (1 << 18), /* Comm wake */
|
|
SERR_10B_8B_ERR = (1 << 19), /* 10b to 8b decode error */
|
|
SERR_DISPARITY = (1 << 20), /* Disparity */
|
|
SERR_CRC = (1 << 21), /* CRC error */
|
|
SERR_HANDSHAKE = (1 << 22), /* Handshake error */
|
|
SERR_LINK_SEQ_ERR = (1 << 23), /* Link sequence error */
|
|
SERR_TRANS_ST_ERROR = (1 << 24), /* Transport state trans. error */
|
|
SERR_UNRECOG_FIS = (1 << 25), /* Unrecognized FIS */
|
|
SERR_DEV_XCHG = (1 << 26), /* device exchanged */
|
|
|
|
/* struct ata_taskfile flags */
|
|
ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */
|
|
ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
|
|
ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */
|
|
ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */
|
|
ATA_TFLAG_LBA = (1 << 4), /* enable LBA */
|
|
ATA_TFLAG_FUA = (1 << 5), /* enable FUA */
|
|
ATA_TFLAG_POLLING = (1 << 6), /* set nIEN to 1 and use polling */
|
|
|
|
/* protocol flags */
|
|
ATA_PROT_FLAG_PIO = (1 << 0), /* is PIO */
|
|
ATA_PROT_FLAG_DMA = (1 << 1), /* is DMA */
|
|
ATA_PROT_FLAG_DATA = ATA_PROT_FLAG_PIO | ATA_PROT_FLAG_DMA,
|
|
ATA_PROT_FLAG_NCQ = (1 << 2), /* is NCQ */
|
|
ATA_PROT_FLAG_ATAPI = (1 << 3), /* is ATAPI */
|
|
};
|
|
|
|
enum ata_tf_protocols {
|
|
/* ATA taskfile protocols */
|
|
ATA_PROT_UNKNOWN, /* unknown/invalid */
|
|
ATA_PROT_NODATA, /* no data */
|
|
ATA_PROT_PIO, /* PIO data xfer */
|
|
ATA_PROT_DMA, /* DMA */
|
|
ATA_PROT_NCQ, /* NCQ */
|
|
ATAPI_PROT_NODATA, /* packet command, no data */
|
|
ATAPI_PROT_PIO, /* packet command, PIO data xfer*/
|
|
ATAPI_PROT_DMA, /* packet command with special DMA sauce */
|
|
};
|
|
|
|
enum ata_ioctls {
|
|
ATA_IOC_GET_IO32 = 0x309,
|
|
ATA_IOC_SET_IO32 = 0x324,
|
|
};
|
|
|
|
enum ata_dev_typed {
|
|
ATA_DEV_ATA, /* ATA device */
|
|
ATA_DEV_ATAPI, /* ATAPI device */
|
|
ATA_DEV_PMP, /* Port Multiplier Port */
|
|
ATA_DEV_UNKNOWN, /* unknown */
|
|
};
|
|
|
|
struct ata_taskfile {
|
|
unsigned long flags; /* ATA_TFLAG_xxx */
|
|
u8 protocol; /* ATA_PROT_xxx */
|
|
|
|
u8 ctl; /* control reg */
|
|
|
|
u8 hob_feature; /* additional data */
|
|
u8 hob_nsect; /* to support LBA48 */
|
|
u8 hob_lbal;
|
|
u8 hob_lbam;
|
|
u8 hob_lbah;
|
|
|
|
u8 feature;
|
|
u8 nsect;
|
|
u8 lbal;
|
|
u8 lbam;
|
|
u8 lbah;
|
|
|
|
u8 device;
|
|
|
|
u8 command; /* IO operation */
|
|
};
|
|
|
|
/*
|
|
* protocol tests
|
|
*/
|
|
static inline unsigned int ata_prot_flags(u8 prot)
|
|
{
|
|
switch (prot) {
|
|
case ATA_PROT_NODATA:
|
|
return 0;
|
|
case ATA_PROT_PIO:
|
|
return ATA_PROT_FLAG_PIO;
|
|
case ATA_PROT_DMA:
|
|
return ATA_PROT_FLAG_DMA;
|
|
case ATA_PROT_NCQ:
|
|
return ATA_PROT_FLAG_DMA | ATA_PROT_FLAG_NCQ;
|
|
case ATAPI_PROT_NODATA:
|
|
return ATA_PROT_FLAG_ATAPI;
|
|
case ATAPI_PROT_PIO:
|
|
return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_PIO;
|
|
case ATAPI_PROT_DMA:
|
|
return ATA_PROT_FLAG_ATAPI | ATA_PROT_FLAG_DMA;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int ata_is_atapi(u8 prot)
|
|
{
|
|
return ata_prot_flags(prot) & ATA_PROT_FLAG_ATAPI;
|
|
}
|
|
|
|
static inline int ata_is_nodata(u8 prot)
|
|
{
|
|
return !(ata_prot_flags(prot) & ATA_PROT_FLAG_DATA);
|
|
}
|
|
|
|
static inline int ata_is_pio(u8 prot)
|
|
{
|
|
return ata_prot_flags(prot) & ATA_PROT_FLAG_PIO;
|
|
}
|
|
|
|
static inline int ata_is_dma(u8 prot)
|
|
{
|
|
return ata_prot_flags(prot) & ATA_PROT_FLAG_DMA;
|
|
}
|
|
|
|
static inline int ata_is_ncq(u8 prot)
|
|
{
|
|
return ata_prot_flags(prot) & ATA_PROT_FLAG_NCQ;
|
|
}
|
|
|
|
static inline int ata_is_data(u8 prot)
|
|
{
|
|
return ata_prot_flags(prot) & ATA_PROT_FLAG_DATA;
|
|
}
|
|
|
|
/*
|
|
* id tests
|
|
*/
|
|
#define ata_id_is_ata(id) (((id)[0] & (1 << 15)) == 0)
|
|
#define ata_id_has_lba(id) ((id)[49] & (1 << 9))
|
|
#define ata_id_has_dma(id) ((id)[49] & (1 << 8))
|
|
#define ata_id_has_ncq(id) ((id)[76] & (1 << 8))
|
|
#define ata_id_queue_depth(id) (((id)[75] & 0x1f) + 1)
|
|
#define ata_id_removeable(id) ((id)[0] & (1 << 7))
|
|
#define ata_id_iordy_disable(id) ((id)[49] & (1 << 10))
|
|
#define ata_id_has_iordy(id) ((id)[49] & (1 << 11))
|
|
|
|
#define ata_id_u32(id,n) \
|
|
(((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)]))
|
|
#define ata_id_u64(id,n) \
|
|
( ((u64) (id)[(n) + 3] << 48) | \
|
|
((u64) (id)[(n) + 2] << 32) | \
|
|
((u64) (id)[(n) + 1] << 16) | \
|
|
((u64) (id)[(n) + 0]) )
|
|
|
|
#define ata_id_cdb_intr(id) (((id)[0] & 0x60) == 0x20)
|
|
|
|
static inline int ata_id_has_fua(const u16 *id)
|
|
{
|
|
if ((id[84] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[84] & (1 << 6);
|
|
}
|
|
|
|
static inline int ata_id_has_flush(const u16 *id)
|
|
{
|
|
if ((id[83] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[83] & (1 << 12);
|
|
}
|
|
|
|
static inline int ata_id_has_flush_ext(const u16 *id)
|
|
{
|
|
if ((id[83] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[83] & (1 << 13);
|
|
}
|
|
|
|
static inline int ata_id_has_lba48(const u16 *id)
|
|
{
|
|
if ((id[83] & 0xC000) != 0x4000)
|
|
return 0;
|
|
if (!ata_id_u64(id, 100))
|
|
return 0;
|
|
return id[83] & (1 << 10);
|
|
}
|
|
|
|
static inline int ata_id_hpa_enabled(const u16 *id)
|
|
{
|
|
/* Yes children, word 83 valid bits cover word 82 data */
|
|
if ((id[83] & 0xC000) != 0x4000)
|
|
return 0;
|
|
/* And 87 covers 85-87 */
|
|
if ((id[87] & 0xC000) != 0x4000)
|
|
return 0;
|
|
/* Check command sets enabled as well as supported */
|
|
if ((id[85] & ( 1 << 10)) == 0)
|
|
return 0;
|
|
return id[82] & (1 << 10);
|
|
}
|
|
|
|
static inline int ata_id_has_wcache(const u16 *id)
|
|
{
|
|
/* Yes children, word 83 valid bits cover word 82 data */
|
|
if ((id[83] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[82] & (1 << 5);
|
|
}
|
|
|
|
static inline int ata_id_has_pm(const u16 *id)
|
|
{
|
|
if ((id[83] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[82] & (1 << 3);
|
|
}
|
|
|
|
static inline int ata_id_rahead_enabled(const u16 *id)
|
|
{
|
|
if ((id[87] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[85] & (1 << 6);
|
|
}
|
|
|
|
static inline int ata_id_wcache_enabled(const u16 *id)
|
|
{
|
|
if ((id[87] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[85] & (1 << 5);
|
|
}
|
|
|
|
static inline unsigned int ata_id_major_version(const u16 *id)
|
|
{
|
|
unsigned int mver;
|
|
|
|
if (id[ATA_ID_MAJOR_VER] == 0xFFFF)
|
|
return 0;
|
|
|
|
for (mver = 14; mver >= 1; mver--)
|
|
if (id[ATA_ID_MAJOR_VER] & (1 << mver))
|
|
break;
|
|
return mver;
|
|
}
|
|
|
|
static inline int ata_id_is_sata(const u16 *id)
|
|
{
|
|
return ata_id_major_version(id) >= 5 && id[93] == 0;
|
|
}
|
|
|
|
static inline int ata_id_has_tpm(const u16 *id)
|
|
{
|
|
/* The TPM bits are only valid on ATA8 */
|
|
if (ata_id_major_version(id) < 8)
|
|
return 0;
|
|
if ((id[48] & 0xC000) != 0x4000)
|
|
return 0;
|
|
return id[48] & (1 << 0);
|
|
}
|
|
|
|
static inline int ata_id_has_dword_io(const u16 *id)
|
|
{
|
|
/* ATA 8 reuses this flag for "trusted" computing */
|
|
if (ata_id_major_version(id) > 7)
|
|
return 0;
|
|
if (id[48] & (1 << 0))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static inline int ata_id_current_chs_valid(const u16 *id)
|
|
{
|
|
/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
|
|
has not been issued to the device then the values of
|
|
id[54] to id[56] are vendor specific. */
|
|
return (id[53] & 0x01) && /* Current translation valid */
|
|
id[54] && /* cylinders in current translation */
|
|
id[55] && /* heads in current translation */
|
|
id[55] <= 16 &&
|
|
id[56]; /* sectors in current translation */
|
|
}
|
|
|
|
static inline int ata_id_is_cfa(const u16 *id)
|
|
{
|
|
u16 v = id[0];
|
|
if (v == 0x848A) /* Standard CF */
|
|
return 1;
|
|
/* Could be CF hiding as standard ATA */
|
|
if (ata_id_major_version(id) >= 3 && id[82] != 0xFFFF &&
|
|
(id[82] & ( 1 << 2)))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static inline int ata_drive_40wire(const u16 *dev_id)
|
|
{
|
|
if (ata_id_is_sata(dev_id))
|
|
return 0; /* SATA */
|
|
if ((dev_id[93] & 0xE000) == 0x6000)
|
|
return 0; /* 80 wire */
|
|
return 1;
|
|
}
|
|
|
|
static inline int ata_drive_40wire_relaxed(const u16 *dev_id)
|
|
{
|
|
if ((dev_id[93] & 0x2000) == 0x2000)
|
|
return 0; /* 80 wire */
|
|
return 1;
|
|
}
|
|
|
|
static inline int atapi_cdb_len(const u16 *dev_id)
|
|
{
|
|
u16 tmp = dev_id[0] & 0x3;
|
|
switch (tmp) {
|
|
case 0: return 12;
|
|
case 1: return 16;
|
|
default: return -1;
|
|
}
|
|
}
|
|
|
|
static inline int atapi_command_packet_set(const u16 *dev_id)
|
|
{
|
|
return (dev_id[0] >> 8) & 0x1f;
|
|
}
|
|
|
|
static inline int atapi_id_dmadir(const u16 *dev_id)
|
|
{
|
|
return ata_id_major_version(dev_id) >= 7 && (dev_id[62] & 0x8000);
|
|
}
|
|
|
|
static inline int is_multi_taskfile(struct ata_taskfile *tf)
|
|
{
|
|
return (tf->command == ATA_CMD_READ_MULTI) ||
|
|
(tf->command == ATA_CMD_WRITE_MULTI) ||
|
|
(tf->command == ATA_CMD_READ_MULTI_EXT) ||
|
|
(tf->command == ATA_CMD_WRITE_MULTI_EXT) ||
|
|
(tf->command == ATA_CMD_WRITE_MULTI_FUA_EXT);
|
|
}
|
|
|
|
static inline int ata_ok(u8 status)
|
|
{
|
|
return ((status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ | ATA_ERR))
|
|
== ATA_DRDY);
|
|
}
|
|
|
|
static inline int lba_28_ok(u64 block, u32 n_block)
|
|
{
|
|
/* check the ending block number */
|
|
return ((block + n_block - 1) < ((u64)1 << 28)) && (n_block <= 256);
|
|
}
|
|
|
|
static inline int lba_48_ok(u64 block, u32 n_block)
|
|
{
|
|
/* check the ending block number */
|
|
return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
|
|
}
|
|
|
|
#define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
|
|
#define sata_pmp_gscr_devid(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
|
|
#define sata_pmp_gscr_rev(gscr) (((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
|
|
#define sata_pmp_gscr_ports(gscr) ((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
|
|
|
|
u64 ata_id_n_sectors(u16 *id);
|
|
u32 ata_dev_classify(u32 sig);
|
|
void ata_id_c_string(const u16 *id, unsigned char *s,
|
|
unsigned int ofs, unsigned int len);
|
|
void ata_dump_id(u16 *id);
|
|
void ata_swap_buf_le16(u16 *buf, unsigned int buf_words);
|
|
|
|
#endif /* __LIBATA_H__ */
|