mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
79f3877794
This required manual merging drivers/mtd/nand/Makefile and adding am335x_evm support for CONFIG_SPL_NAND_DRIVERS
374 lines
9.5 KiB
C
374 lines
9.5 KiB
C
/*
|
|
* clock.c
|
|
*
|
|
* clocks for AM33XX based boards
|
|
*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/io.h>
|
|
|
|
#define PRCM_MOD_EN 0x2
|
|
#define PRCM_FORCE_WAKEUP 0x2
|
|
#define PRCM_FUNCTL 0x0
|
|
|
|
#define PRCM_EMIF_CLK_ACTIVITY BIT(2)
|
|
#define PRCM_L3_GCLK_ACTIVITY BIT(4)
|
|
|
|
#define PLL_BYPASS_MODE 0x4
|
|
#define ST_MN_BYPASS 0x00000100
|
|
#define ST_DPLL_CLK 0x00000001
|
|
#define CLK_SEL_MASK 0x7ffff
|
|
#define CLK_DIV_MASK 0x1f
|
|
#define CLK_DIV2_MASK 0x7f
|
|
#define CLK_SEL_SHIFT 0x8
|
|
#define CLK_MODE_SEL 0x7
|
|
#define CLK_MODE_MASK 0xfffffff8
|
|
#define CLK_DIV_SEL 0xFFFFFFE0
|
|
#define CPGMAC0_IDLE 0x30000
|
|
#define DPLL_CLKDCOLDO_GATE_CTRL 0x300
|
|
|
|
const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
|
|
const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
|
|
const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
|
|
const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC;
|
|
|
|
static void enable_interface_clocks(void)
|
|
{
|
|
/* Enable all the Interconnect Modules */
|
|
writel(PRCM_MOD_EN, &cmper->l3clkctrl);
|
|
while (readl(&cmper->l3clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
writel(PRCM_MOD_EN, &cmper->l4lsclkctrl);
|
|
while (readl(&cmper->l4lsclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
writel(PRCM_MOD_EN, &cmper->l4fwclkctrl);
|
|
while (readl(&cmper->l4fwclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
writel(PRCM_MOD_EN, &cmwkup->wkl4wkclkctrl);
|
|
while (readl(&cmwkup->wkl4wkclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
writel(PRCM_MOD_EN, &cmper->l3instrclkctrl);
|
|
while (readl(&cmper->l3instrclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
writel(PRCM_MOD_EN, &cmper->l4hsclkctrl);
|
|
while (readl(&cmper->l4hsclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
writel(PRCM_MOD_EN, &cmwkup->wkgpio0clkctrl);
|
|
while (readl(&cmwkup->wkgpio0clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
}
|
|
|
|
/*
|
|
* Force power domain wake up transition
|
|
* Ensure that the corresponding interface clock is active before
|
|
* using the peripheral
|
|
*/
|
|
static void power_domain_wkup_transition(void)
|
|
{
|
|
writel(PRCM_FORCE_WAKEUP, &cmper->l3clkstctrl);
|
|
writel(PRCM_FORCE_WAKEUP, &cmper->l4lsclkstctrl);
|
|
writel(PRCM_FORCE_WAKEUP, &cmwkup->wkclkstctrl);
|
|
writel(PRCM_FORCE_WAKEUP, &cmper->l4fwclkstctrl);
|
|
writel(PRCM_FORCE_WAKEUP, &cmper->l3sclkstctrl);
|
|
}
|
|
|
|
/*
|
|
* Enable the peripheral clock for required peripherals
|
|
*/
|
|
static void enable_per_clocks(void)
|
|
{
|
|
/* Enable the control module though RBL would have done it*/
|
|
writel(PRCM_MOD_EN, &cmwkup->wkctrlclkctrl);
|
|
while (readl(&cmwkup->wkctrlclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* Enable the module clock */
|
|
writel(PRCM_MOD_EN, &cmper->timer2clkctrl);
|
|
while (readl(&cmper->timer2clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* Select the Master osc 24 MHZ as Timer2 clock source */
|
|
writel(0x1, &cmdpll->clktimer2clk);
|
|
|
|
/* UART0 */
|
|
writel(PRCM_MOD_EN, &cmwkup->wkup_uart0ctrl);
|
|
while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* UART1 */
|
|
#ifdef CONFIG_SERIAL2
|
|
writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
|
|
while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
#endif /* CONFIG_SERIAL2 */
|
|
|
|
/* UART2 */
|
|
#ifdef CONFIG_SERIAL3
|
|
writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
|
|
while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
#endif /* CONFIG_SERIAL3 */
|
|
|
|
/* UART3 */
|
|
#ifdef CONFIG_SERIAL4
|
|
writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
|
|
while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
#endif /* CONFIG_SERIAL4 */
|
|
|
|
/* UART4 */
|
|
#ifdef CONFIG_SERIAL5
|
|
writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
|
|
while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
#endif /* CONFIG_SERIAL5 */
|
|
|
|
/* UART5 */
|
|
#ifdef CONFIG_SERIAL6
|
|
writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
|
|
while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
#endif /* CONFIG_SERIAL6 */
|
|
|
|
/* GPMC */
|
|
writel(PRCM_MOD_EN, &cmper->gpmcclkctrl);
|
|
while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* ELM */
|
|
writel(PRCM_MOD_EN, &cmper->elmclkctrl);
|
|
while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* MMC0*/
|
|
writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
|
|
while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* i2c0 */
|
|
writel(PRCM_MOD_EN, &cmwkup->wkup_i2c0ctrl);
|
|
while (readl(&cmwkup->wkup_i2c0ctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* gpio1 module */
|
|
writel(PRCM_MOD_EN, &cmper->gpio1clkctrl);
|
|
while (readl(&cmper->gpio1clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* gpio2 module */
|
|
writel(PRCM_MOD_EN, &cmper->gpio2clkctrl);
|
|
while (readl(&cmper->gpio2clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* gpio3 module */
|
|
writel(PRCM_MOD_EN, &cmper->gpio3clkctrl);
|
|
while (readl(&cmper->gpio3clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* i2c1 */
|
|
writel(PRCM_MOD_EN, &cmper->i2c1clkctrl);
|
|
while (readl(&cmper->i2c1clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* Ethernet */
|
|
writel(PRCM_MOD_EN, &cmper->cpgmac0clkctrl);
|
|
while ((readl(&cmper->cpgmac0clkctrl) & CPGMAC0_IDLE) != PRCM_FUNCTL)
|
|
;
|
|
|
|
/* spi0 */
|
|
writel(PRCM_MOD_EN, &cmper->spi0clkctrl);
|
|
while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* RTC */
|
|
writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
|
|
while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
|
|
;
|
|
|
|
/* MUSB */
|
|
writel(PRCM_MOD_EN, &cmper->usb0clkctrl);
|
|
while (readl(&cmper->usb0clkctrl) != PRCM_MOD_EN)
|
|
;
|
|
}
|
|
|
|
static void mpu_pll_config(void)
|
|
{
|
|
u32 clkmode, clksel, div_m2;
|
|
|
|
clkmode = readl(&cmwkup->clkmoddpllmpu);
|
|
clksel = readl(&cmwkup->clkseldpllmpu);
|
|
div_m2 = readl(&cmwkup->divm2dpllmpu);
|
|
|
|
/* Set the PLL to bypass Mode */
|
|
writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllmpu);
|
|
while (readl(&cmwkup->idlestdpllmpu) != ST_MN_BYPASS)
|
|
;
|
|
|
|
clksel = clksel & (~CLK_SEL_MASK);
|
|
clksel = clksel | ((MPUPLL_M << CLK_SEL_SHIFT) | MPUPLL_N);
|
|
writel(clksel, &cmwkup->clkseldpllmpu);
|
|
|
|
div_m2 = div_m2 & ~CLK_DIV_MASK;
|
|
div_m2 = div_m2 | MPUPLL_M2;
|
|
writel(div_m2, &cmwkup->divm2dpllmpu);
|
|
|
|
clkmode = clkmode | CLK_MODE_SEL;
|
|
writel(clkmode, &cmwkup->clkmoddpllmpu);
|
|
|
|
while (readl(&cmwkup->idlestdpllmpu) != ST_DPLL_CLK)
|
|
;
|
|
}
|
|
|
|
static void core_pll_config(void)
|
|
{
|
|
u32 clkmode, clksel, div_m4, div_m5, div_m6;
|
|
|
|
clkmode = readl(&cmwkup->clkmoddpllcore);
|
|
clksel = readl(&cmwkup->clkseldpllcore);
|
|
div_m4 = readl(&cmwkup->divm4dpllcore);
|
|
div_m5 = readl(&cmwkup->divm5dpllcore);
|
|
div_m6 = readl(&cmwkup->divm6dpllcore);
|
|
|
|
/* Set the PLL to bypass Mode */
|
|
writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllcore);
|
|
|
|
while (readl(&cmwkup->idlestdpllcore) != ST_MN_BYPASS)
|
|
;
|
|
|
|
clksel = clksel & (~CLK_SEL_MASK);
|
|
clksel = clksel | ((COREPLL_M << CLK_SEL_SHIFT) | COREPLL_N);
|
|
writel(clksel, &cmwkup->clkseldpllcore);
|
|
|
|
div_m4 = div_m4 & ~CLK_DIV_MASK;
|
|
div_m4 = div_m4 | COREPLL_M4;
|
|
writel(div_m4, &cmwkup->divm4dpllcore);
|
|
|
|
div_m5 = div_m5 & ~CLK_DIV_MASK;
|
|
div_m5 = div_m5 | COREPLL_M5;
|
|
writel(div_m5, &cmwkup->divm5dpllcore);
|
|
|
|
div_m6 = div_m6 & ~CLK_DIV_MASK;
|
|
div_m6 = div_m6 | COREPLL_M6;
|
|
writel(div_m6, &cmwkup->divm6dpllcore);
|
|
|
|
clkmode = clkmode | CLK_MODE_SEL;
|
|
writel(clkmode, &cmwkup->clkmoddpllcore);
|
|
|
|
while (readl(&cmwkup->idlestdpllcore) != ST_DPLL_CLK)
|
|
;
|
|
}
|
|
|
|
static void per_pll_config(void)
|
|
{
|
|
u32 clkmode, clksel, div_m2;
|
|
|
|
clkmode = readl(&cmwkup->clkmoddpllper);
|
|
clksel = readl(&cmwkup->clkseldpllper);
|
|
div_m2 = readl(&cmwkup->divm2dpllper);
|
|
|
|
/* Set the PLL to bypass Mode */
|
|
writel(PLL_BYPASS_MODE, &cmwkup->clkmoddpllper);
|
|
|
|
while (readl(&cmwkup->idlestdpllper) != ST_MN_BYPASS)
|
|
;
|
|
|
|
clksel = clksel & (~CLK_SEL_MASK);
|
|
clksel = clksel | ((PERPLL_M << CLK_SEL_SHIFT) | PERPLL_N);
|
|
writel(clksel, &cmwkup->clkseldpllper);
|
|
|
|
div_m2 = div_m2 & ~CLK_DIV2_MASK;
|
|
div_m2 = div_m2 | PERPLL_M2;
|
|
writel(div_m2, &cmwkup->divm2dpllper);
|
|
|
|
clkmode = clkmode | CLK_MODE_SEL;
|
|
writel(clkmode, &cmwkup->clkmoddpllper);
|
|
|
|
while (readl(&cmwkup->idlestdpllper) != ST_DPLL_CLK)
|
|
;
|
|
|
|
writel(DPLL_CLKDCOLDO_GATE_CTRL, &cmwkup->clkdcoldodpllper);
|
|
}
|
|
|
|
void ddr_pll_config(unsigned int ddrpll_m)
|
|
{
|
|
u32 clkmode, clksel, div_m2;
|
|
|
|
clkmode = readl(&cmwkup->clkmoddpllddr);
|
|
clksel = readl(&cmwkup->clkseldpllddr);
|
|
div_m2 = readl(&cmwkup->divm2dpllddr);
|
|
|
|
/* Set the PLL to bypass Mode */
|
|
clkmode = (clkmode & CLK_MODE_MASK) | PLL_BYPASS_MODE;
|
|
writel(clkmode, &cmwkup->clkmoddpllddr);
|
|
|
|
/* Wait till bypass mode is enabled */
|
|
while ((readl(&cmwkup->idlestdpllddr) & ST_MN_BYPASS)
|
|
!= ST_MN_BYPASS)
|
|
;
|
|
|
|
clksel = clksel & (~CLK_SEL_MASK);
|
|
clksel = clksel | ((ddrpll_m << CLK_SEL_SHIFT) | DDRPLL_N);
|
|
writel(clksel, &cmwkup->clkseldpllddr);
|
|
|
|
div_m2 = div_m2 & CLK_DIV_SEL;
|
|
div_m2 = div_m2 | DDRPLL_M2;
|
|
writel(div_m2, &cmwkup->divm2dpllddr);
|
|
|
|
clkmode = (clkmode & CLK_MODE_MASK) | CLK_MODE_SEL;
|
|
writel(clkmode, &cmwkup->clkmoddpllddr);
|
|
|
|
/* Wait till dpll is locked */
|
|
while ((readl(&cmwkup->idlestdpllddr) & ST_DPLL_CLK) != ST_DPLL_CLK)
|
|
;
|
|
}
|
|
|
|
void enable_emif_clocks(void)
|
|
{
|
|
/* Enable the EMIF_FW Functional clock */
|
|
writel(PRCM_MOD_EN, &cmper->emiffwclkctrl);
|
|
/* Enable EMIF0 Clock */
|
|
writel(PRCM_MOD_EN, &cmper->emifclkctrl);
|
|
/* Poll if module is functional */
|
|
while ((readl(&cmper->emifclkctrl)) != PRCM_MOD_EN)
|
|
;
|
|
}
|
|
|
|
/*
|
|
* Configure the PLL/PRCM for necessary peripherals
|
|
*/
|
|
void pll_init()
|
|
{
|
|
mpu_pll_config();
|
|
core_pll_config();
|
|
per_pll_config();
|
|
|
|
/* Enable the required interconnect clocks */
|
|
enable_interface_clocks();
|
|
|
|
/* Power domain wake up transition */
|
|
power_domain_wkup_transition();
|
|
|
|
/* Enable the required peripherals */
|
|
enable_per_clocks();
|
|
}
|