mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
b3cf43392a
The variable nfc_pads is only referenced when CONFIG_CMD_NAND is set, add a gaurd. The variable gpio_pads is never referenced, drop it. The variable usdhc4_pads are only referenced when we do not have CONFIG_CMD_NAND set and we are not doing an SPL build, modify the existing guard. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefano Babic <sbabic@denx.de> |
||
|---|---|---|
| .. | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| pcm058.c | ||
| README | ||
Board information ----------------- The SBC produced by Phytec has a SOM based on a i.MX6Q. The SOM is sold in two versions, with eMMC or with NAND. Support here is for the SOM with NAND. The evaluation board "phyBoard-Mira" is thought to be used together with the SOM. More information on the board can be found on manufacturer's website: http://www.phytec.de/produkt/single-board-computer/phyboard-mira/ http://www.phytec.de/fileadmin/user_upload/images/content/1.Products/SOMs/phyCORE-i.MX6/L-808e_1.pdf Building U-Boot ------------------------------- $ make pcm058_defconfig $ make This generates the artifacts SPL and u-boot.img. The SOM can boot from NAND or from SD-Card, having the SPI-NOR as second option. The dip switch "DIP-1" on the board let choose between NAND and SD. DIP-1 set to off: Boot first from NAND, then try SPI DIP-1 set to on: Boot first from SD, then try SPI The bootloader was tested with DIP-1 set to on. If a SD-card is present, then the RBL tries to load SPL from the SD Card, if not, RBL loads from SPI-NOR. The SPL tries then to load from the same device where SPL was loaded (SD or SPI). Booting from NAND is not supported.