u-boot/arch/arm/include/asm/arch-exynos/dp_info.h
Ajay Kumar 9b572852c0 EXYNOS5: Add support for FIMD and DP
Add panel_info structure required by LCD driver
and DP panel platdata for SMDK5250.
Add GPIO configuration for LCD.
Enable FIMD and DP support on SMDK5250.
DP Panel size: 2560x1600.
We use 16BPP resolution to get LCD console.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Acked-by: Simon Glass <sjg@chomium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2013-01-10 10:19:47 +09:00

216 lines
3.6 KiB
C

/*
* Copyright (C) 2012 Samsung Electronics
*
* Author: Donghwa Lee <dh09.lee@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _DP_INFO_H
#define _DP_INFO_H
#define msleep(a) udelay(a * 1000)
#define DP_TIMEOUT_LOOP_COUNT 100
#define MAX_CR_LOOP 5
#define MAX_EQ_LOOP 4
#define EXYNOS_DP_SUCCESS 0
enum {
DP_DISABLE,
DP_ENABLE,
};
struct edp_disp_info {
char *name;
unsigned int h_total;
unsigned int h_res;
unsigned int h_sync_width;
unsigned int h_back_porch;
unsigned int h_front_porch;
unsigned int v_total;
unsigned int v_res;
unsigned int v_sync_width;
unsigned int v_back_porch;
unsigned int v_front_porch;
unsigned int v_sync_rate;
};
struct edp_link_train_info {
unsigned int lt_status;
unsigned int ep_loop;
unsigned int cr_loop[4];
};
struct edp_video_info {
unsigned int master_mode;
unsigned int bist_mode;
unsigned int bist_pattern;
unsigned int h_sync_polarity;
unsigned int v_sync_polarity;
unsigned int interlaced;
unsigned int color_space;
unsigned int dynamic_range;
unsigned int ycbcr_coeff;
unsigned int color_depth;
};
struct edp_device_info {
struct edp_disp_info disp_info;
struct edp_link_train_info lt_info;
struct edp_video_info video_info;
/*below info get from panel during training*/
unsigned char lane_bw;
unsigned char lane_cnt;
unsigned char dpcd_rev;
/*support enhanced frame cap */
unsigned char dpcd_efc;
};
enum analog_power_block {
AUX_BLOCK,
CH0_BLOCK,
CH1_BLOCK,
CH2_BLOCK,
CH3_BLOCK,
ANALOG_TOTAL,
POWER_ALL
};
enum pll_status {
PLL_UNLOCKED = 0,
PLL_LOCKED
};
enum {
COLOR_RGB,
COLOR_YCBCR422,
COLOR_YCBCR444
};
enum {
VESA,
CEA
};
enum {
COLOR_YCBCR601,
COLOR_YCBCR709
};
enum {
COLOR_6,
COLOR_8,
COLOR_10,
COLOR_12
};
enum {
DP_LANE_BW_1_62 = 0x06,
DP_LANE_BW_2_70 = 0x0a,
};
enum {
DP_LANE_CNT_1 = 1,
DP_LANE_CNT_2 = 2,
DP_LANE_CNT_4 = 4,
};
enum {
DP_DPCD_REV_10 = 0x10,
DP_DPCD_REV_11 = 0x11,
};
enum {
DP_LT_NONE,
DP_LT_START,
DP_LT_CR,
DP_LT_ET,
DP_LT_FINISHED,
DP_LT_FAIL,
};
enum {
PRE_EMPHASIS_LEVEL_0,
PRE_EMPHASIS_LEVEL_1,
PRE_EMPHASIS_LEVEL_2,
PRE_EMPHASIS_LEVEL_3,
};
enum {
PRBS7,
D10_2,
TRAINING_PTN1,
TRAINING_PTN2,
DP_NONE
};
enum {
VOLTAGE_LEVEL_0,
VOLTAGE_LEVEL_1,
VOLTAGE_LEVEL_2,
VOLTAGE_LEVEL_3,
};
enum pattern_type {
NO_PATTERN,
COLOR_RAMP,
BALCK_WHITE_V_LINES,
COLOR_SQUARE,
INVALID_PATTERN,
COLORBAR_32,
COLORBAR_64,
WHITE_GRAY_BALCKBAR_32,
WHITE_GRAY_BALCKBAR_64,
MOBILE_WHITEBAR_32,
MOBILE_WHITEBAR_64
};
enum {
CALCULATED_M,
REGISTER_M
};
enum {
VIDEO_TIMING_FROM_CAPTURE,
VIDEO_TIMING_FROM_REGISTER
};
struct exynos_dp_platform_data {
struct edp_device_info *edp_dev_info;
void (*phy_enable)(unsigned int);
};
#ifdef CONFIG_EXYNOS_DP
unsigned int exynos_init_dp(void);
#else
unsigned int exynos_init_dp(void)
{
return 0;
}
#endif
void exynos_set_dp_platform_data(struct exynos_dp_platform_data *pd);
#endif /* _DP_INFO_H */