mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
c97cd1ba48
Update CONFIG_RAMBOOT and CONFIG_NAND_SPL references to accept CONFIG_SPL and CONFIG_SPL_BUILD, respectively. CONFIG_NAND_SPL can be removed once the last mpc85xx nand_spl target is gone. CONFIG_RAMBOOT will need to remain for other use cases, but it doesn't seem right to overload it for meaning SPL as well as nand_spl does. Even if it's somewhat appropriate for the main u-boot, the SPL itself isn't (necessarily) ramboot, and we don't have separate configs for SPL and main u-boot. It was also inconsistent, as other platforms such as mpc83xx didn't use CONFIG_RAMBOOT in this way. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
166 lines
5.9 KiB
Text
166 lines
5.9 KiB
Text
External Debug Support
|
|
----------------------
|
|
|
|
Freescale's e500v1 and e500v2 cores (used in mpc85xx chips) have some
|
|
restrictions on external debugging (JTAG). In particular, for the debugger to
|
|
be able to receive control after a single step or breakpoint:
|
|
- MSR[DE] must be set
|
|
- A valid opcode must be fetchable, through the MMU, from the debug
|
|
exception vector (IVPR + IVOR15).
|
|
|
|
To maximize the time during which this requirement is met, U-Boot sets MSR[DE]
|
|
immediately on entry and keeps it set. It also uses a temporary TLB to keep a
|
|
mapping to a valid opcode at the debug exception vector, even if we normally
|
|
don't support exception vectors being used that early, and that's not the area
|
|
where U-Boot currently executes from.
|
|
|
|
Note that there may still be some small windows where debugging will not work,
|
|
such as in between updating IVPR and IVOR15.
|
|
|
|
Config Switches:
|
|
----------------
|
|
|
|
Please refer README section "MPC85xx External Debug Support"
|
|
|
|
Major Config Switches during various boot Modes
|
|
----------------------------------------------
|
|
|
|
NOR boot
|
|
!defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
|
|
NOR boot Secure
|
|
!defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
|
|
RAMBOOT(SD, SPI & NAND boot)
|
|
defined(CONFIG_SYS_RAMBOOT)
|
|
RAMBOOT Secure (SD, SPI & NAND)
|
|
defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
|
|
NAND SPL BOOT
|
|
defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_NAND_SPL)
|
|
|
|
|
|
TLB Entries during u-boot execution
|
|
-----------------------------------
|
|
|
|
Note: Sequence number is in order of execution
|
|
|
|
A) defined(CONFIG_SYS_RAMBOOT) i.e. SD, SPI, NAND RAMBOOT & NAND_SPL boot
|
|
|
|
1) TLB entry to overcome e500 v1/v2 debug restriction
|
|
Location : Label "_start_e500"
|
|
TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB
|
|
EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_MONITOR_BASE
|
|
Properties : 256K, AS0, I, IPROT
|
|
|
|
2) TLB entry for working in AS1
|
|
Location : Label "create_init_ram_area"
|
|
TLB Entry : 15
|
|
EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_MONITOR_BASE
|
|
Properties : 1M, AS1, I, G, IPROT
|
|
|
|
3) TLB entry for the stack during AS1
|
|
Location : Lable "create_init_ram_area"
|
|
TLB Entry : 14
|
|
EPN -->RPN : CONFIG_SYS_INIT_RAM_ADDR --> CONFIG_SYS_INIT_RAM_ADDR
|
|
Properties : 16K, AS1, IPROT
|
|
|
|
4) TLB entry for CCSRBAR during AS1 execution
|
|
Location : cpu_init_early_f
|
|
TLB Entry : 13
|
|
EPN -->RPN : CONFIG_SYS_CCSRBAR --> CONFIG_SYS_CCSRBAR
|
|
Properties : 1M, AS1, I, G
|
|
|
|
5) Invalidate unproctected TLB Entries
|
|
Location : cpu_init_early_f
|
|
Invalidated: 13
|
|
|
|
6) Create TLB entries as per boards/freescale/<board>/tlb.c
|
|
Location : cpu_init_early_f --> init_tlbs()
|
|
Properties : ..., AS0, ...
|
|
Please note It can overwrites previous TLB Entries.
|
|
|
|
7) Disable TLB Entries of AS1
|
|
Location : cpu_init_f --> disable_tlb()
|
|
Disable : 15, 14
|
|
|
|
8) Update Flash's TLB entry
|
|
Location : Board_init_r
|
|
TLB entry : Search from TLB entries
|
|
EPN -->RPN : CONFIG_SYS_FLASH_BASE --> CONFIG_SYS_FLASH_BASE_PHYS
|
|
Properties : Board specific size, AS0, I, G, IPROT
|
|
|
|
|
|
B) !defined(CONFIG_SYS_RAMBOOT) i.e. NOR boot
|
|
|
|
1) TLB entry to overcome e500 v1/v2 debug restriction
|
|
Location : Label "_start_e500"
|
|
TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB
|
|
#if defined(CONFIG_SECURE_BOOT)
|
|
EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW
|
|
Properties : 1M, AS1, I, G, IPROT
|
|
#else
|
|
EPN -->RPN : CONFIG_SYS_MONITOR_BASE & 0xffc00000 --> 0xffc00000
|
|
Properties : 4M, AS0, I, G, IPROT
|
|
#endif
|
|
|
|
2) TLB entry for working in AS1
|
|
Location : Label "create_init_ram_area"
|
|
TLB Entry : 15
|
|
#if defined(CONFIG_SECURE_BOOT)
|
|
EPN -->RPN : CONFIG_SYS_MONITOR_BASE --> CONFIG_SYS_PBI_FLASH_WINDOW
|
|
Properties : 1M, AS1, I, G, IPROT
|
|
#else
|
|
EPN -->RPN : CONFIG_SYS_MONITOR_BASE & 0xffc00000 --> 0xffc00000
|
|
Properties : 4M, AS1, I, G, IPROT
|
|
#endif
|
|
|
|
3) TLB entry for the stack during AS1
|
|
Location : Lable "create_init_ram_area"
|
|
TLB Entry : 14
|
|
EPN -->RPN : CONFIG_SYS_INIT_RAM_ADDR --> CONFIG_SYS_INIT_RAM_ADDR
|
|
Properties : 16K, AS1, IPROT
|
|
|
|
4) TLB entry for CCSRBAR during AS1 execution
|
|
Location : cpu_init_early_f
|
|
TLB Entry : 13
|
|
EPN -->RPN : CONFIG_SYS_CCSRBAR --> CONFIG_SYS_CCSRBAR
|
|
Properties : 1M, AS1, I, G
|
|
|
|
5) TLB entry for Errata workaround CONFIG_SYS_FSL_ERRATUM_IFC_A003399
|
|
Location : cpu_init_early_f
|
|
TLB Entry : 9
|
|
EPN -->RPN : SRAM_BASE_ADDR --> SRAM_BASE_ADDR
|
|
Properties : 1M, AS1, I
|
|
|
|
6) CONFIG_SYS_FSL_ERRATUM_IFC_A003399 Adjust flash's phys addr
|
|
Location : cpu_init_early_f --> setup_ifc
|
|
TLB Entry : Get Flash TLB
|
|
EPN -->RPN : Adjusted flash_phys --> Adjusted flash_phys
|
|
Properties : 4M, AS1, I, G, IPROT
|
|
|
|
7) CONFIG_SYS_FSL_ERRATUM_IFC_A003399: E500 v1,v2 debug restriction
|
|
Location : cpu_init_early_f --> setup_ifc
|
|
TLB Entry : CONFIG_SYS_PPC_E500_DEBUG_TLB
|
|
EPN -->RPN : Adjusted flash_phys --> Adjusted flash_phys
|
|
Properties : 4M, AS0, I, G, IPROT
|
|
|
|
8) Invalidate unproctected TLB Entries
|
|
Location : cpu_init_early_f
|
|
Invalidated: 13, 9
|
|
|
|
9) Create TLB entries as per boards/freescale/<board>/tlb.c
|
|
Location : cpu_init_early_f --> init_tlbs()
|
|
Properties : ..., AS0, ...
|
|
Note: It can overwrites previous TLB Entries
|
|
|
|
10) Disable TLB Entries of AS1
|
|
Location : cpu_init_f --> disable_tlb()
|
|
Disable : 15, 14
|
|
|
|
11) Create DDR's TLB entriy
|
|
Location : Board_init_f -> init_func_ram -> initdram
|
|
TLB entry : Search free TLB entry
|
|
|
|
12) Update Flash's TLB entry
|
|
Location : Board_init_r
|
|
TLB entry : Search from TLB entries
|
|
EPN -->RPN : CONFIG_SYS_FLASH_BASE --> CONFIG_SYS_FLASH_BASE_PHYS
|
|
Properties : Board specific size, AS0, I, G, IPROT
|