mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 21:54:45 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
117 lines
2.6 KiB
C
117 lines
2.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
*
|
|
* (C) Copyright 2009 Magnus Lilja <lilja.magnus@gmail.com>
|
|
*
|
|
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <watchdog.h>
|
|
#include <power/pmic.h>
|
|
#include <fsl_pmic.h>
|
|
#include <errno.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void board_init_f(ulong bootflag)
|
|
{
|
|
/*
|
|
* copy ourselves from where we are running to where we were
|
|
* linked at. Use ulong pointers as all addresses involved
|
|
* are 4-byte-aligned.
|
|
*/
|
|
ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
|
|
asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
|
|
asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
|
|
asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
|
|
asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
|
|
for (dst = start_ptr; dst < end_ptr; dst++)
|
|
*dst = *(dst+(run_ptr-link_ptr));
|
|
/*
|
|
* branch to nand_boot's link-time address.
|
|
*/
|
|
asm volatile("ldr pc, =nand_boot");
|
|
}
|
|
#endif
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
PHYS_SDRAM_1_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
/* CS5: CPLD incl. network controller */
|
|
static const struct mxc_weimcs cs5 = {
|
|
/* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
|
|
CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
|
|
/* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
|
|
CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
|
|
/* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
|
|
CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
|
|
};
|
|
|
|
mxc_setup_weimcs(5, &cs5);
|
|
|
|
/* Setup UART1 and SPI2 pins */
|
|
mx31_uart1_hw_init();
|
|
mx31_spi2_hw_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
u32 val;
|
|
struct pmic *p;
|
|
int ret;
|
|
|
|
ret = pmic_init(CONFIG_FSL_PMIC_BUS);
|
|
if (ret)
|
|
return ret;
|
|
|
|
p = pmic_get("FSL_PMIC");
|
|
if (!p)
|
|
return -ENODEV;
|
|
/* Enable RTC battery */
|
|
pmic_reg_read(p, REG_POWER_CTL0, &val);
|
|
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
|
|
pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
hw_watchdog_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: MX31PDK\n");
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_SMC911X
|
|
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|