Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-08 06:04:34 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/freescale/mpc8569mds/mpc8569mds.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

585 lines
16 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2009-2010 Freescale Semiconductor.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*/
#include <common.h>
#include <console.h>
#include <hwconfig.h>
#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <asm/io.h>
#include <spd_sdram.h>
#include <i2c.h>
#include <ioports.h>
#include <linux/libfdt.h>
#include <fdt_support.h>
#include <fsl_esdhc.h>
#include <phy.h>
#include "bcsr.h"
#if defined(CONFIG_PQ_MDS_PIB)
#include "../common/pq-mds-pib.h"
#endif
const qe_iop_conf_t qe_iop_conf_tab[] = {
/* QE_MUX_MDC */
{2, 31, 1, 0, 1}, /* QE_MUX_MDC */
/* QE_MUX_MDIO */
{2, 30, 3, 0, 2}, /* QE_MUX_MDIO */
#if defined(CONFIG_SYS_UCC_RGMII_MODE)
/* UCC_1_RGMII */
{2, 11, 2, 0, 1}, /* CLK12 */
{0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
{0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
{0, 2, 1, 0, 1}, /* ENET1_TXD2_SER1_TXD2 */
{0, 3, 1, 0, 2}, /* ENET1_TXD3_SER1_TXD3 */
{0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
{0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
{0, 8, 2, 0, 2}, /* ENET1_RXD2_SER1_RXD2 */
{0, 9, 2, 0, 2}, /* ENET1_RXD3_SER1_RXD3 */
{0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
{2, 8, 2, 0, 1}, /* ENET1_GRXCLK */
{2, 20, 1, 0, 2}, /* ENET1_GTXCLK */
/* UCC_2_RGMII */
{2, 16, 2, 0, 3}, /* CLK17 */
{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
{0, 16, 1, 0, 1}, /* ENET2_TXD2_SER2_TXD2 */
{0, 17, 1, 0, 1}, /* ENET2_TXD3_SER2_TXD3 */
{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
{0, 22, 2, 0, 1}, /* ENET2_RXD2_SER2_RXD2 */
{0, 23, 2, 0, 1}, /* ENET2_RXD3_SER2_RXD3 */
{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
{2, 3, 2, 0, 1}, /* ENET2_GRXCLK */
{2, 2, 1, 0, 2}, /* ENET2_GTXCLK */
/* UCC_3_RGMII */
{2, 11, 2, 0, 1}, /* CLK12 */
{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
{0, 31, 1, 0, 2}, /* ENET3_TXD2_SER3_TXD2 */
{1, 0, 1, 0, 3}, /* ENET3_TXD3_SER3_TXD3 */
{1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
{1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
{1, 5, 2, 0, 2}, /* ENET3_RXD2_SER3_RXD2 */
{1, 6, 2, 0, 3}, /* ENET3_RXD3_SER3_RXD3 */
{1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
{1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
{2, 9, 2, 0, 2}, /* ENET3_GRXCLK */
{2, 25, 1, 0, 2}, /* ENET3_GTXCLK */
/* UCC_4_RGMII */
{2, 16, 2, 0, 3}, /* CLK17 */
{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
{1, 14, 1, 0, 1}, /* ENET4_TXD2_SER4_TXD2 */
{1, 15, 1, 0, 2}, /* ENET4_TXD3_SER4_TXD3 */
{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
{1, 20, 2, 0, 1}, /* ENET4_RXD2_SER4_RXD2 */
{1, 21, 2, 0, 2}, /* ENET4_RXD3_SER4_RXD3 */
{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
{2, 17, 2, 0, 2}, /* ENET4_GRXCLK */
{2, 24, 1, 0, 2}, /* ENET4_GTXCLK */
#elif defined(CONFIG_SYS_UCC_RMII_MODE)
/* UCC_1_RMII */
{2, 15, 2, 0, 1}, /* CLK16 */
{0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */
{0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */
{0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */
{0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */
{0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */
{0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */
/* UCC_2_RMII */
{2, 15, 2, 0, 1}, /* CLK16 */
{0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */
{0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */
{0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */
{0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */
{0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */
{0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */
/* UCC_3_RMII */
{2, 15, 2, 0, 1}, /* CLK16 */
{0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */
{0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */
{1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */
{1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */
{1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */
{1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */
/* UCC_4_RMII */
{2, 15, 2, 0, 1}, /* CLK16 */
{1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */
{1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */
{1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */
{1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */
{1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */
{1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */
#endif
/* UART1 is muxed with QE PortF bit [9-12].*/
{5, 12, 2, 0, 3}, /* UART1_SIN */
{5, 9, 1, 0, 3}, /* UART1_SOUT */
{5, 10, 2, 0, 3}, /* UART1_CTS_B */
{5, 11, 1, 0, 2}, /* UART1_RTS_B */
/* QE UART */
{0, 19, 1, 0, 2}, /* QEUART_TX */
{1, 17, 2, 0, 3}, /* QEUART_RX */
{0, 25, 1, 0, 1}, /* QEUART_RTS */
{1, 23, 2, 0, 1}, /* QEUART_CTS */
/* QE USB */
{5, 3, 1, 0, 1}, /* USB_OE */
{5, 4, 1, 0, 2}, /* USB_TP */
{5, 5, 1, 0, 2}, /* USB_TN */
{5, 6, 2, 0, 2}, /* USB_RP */
{5, 7, 2, 0, 1}, /* USB_RX */
{5, 8, 2, 0, 1}, /* USB_RN */
{2, 4, 2, 0, 2}, /* CLK5 */
/* SPI Flash, M25P40 */
{4, 27, 3, 0, 1}, /* SPI_MOSI */
{4, 28, 3, 0, 1}, /* SPI_MISO */
{4, 29, 3, 0, 1}, /* SPI_CLK */
{4, 30, 1, 0, 0}, /* SPI_SEL, GPIO */
{0, 0, 0, 0, QE_IOP_TAB_END} /* END of table */
};
void local_bus_init(void);
int board_early_init_f (void)
{
/*
* Initialize local bus.
*/
local_bus_init ();
enable_8569mds_flash_write();
#ifdef CONFIG_QE
enable_8569mds_qe_uec();
#endif
#if CONFIG_SYS_I2C2_OFFSET
/* Enable I2C2 signals instead of SD signals */
volatile struct ccsr_gur *gur;
gur = (struct ccsr_gur *)(CONFIG_SYS_IMMR + 0xe0000);
gur->plppar1 &= ~PLPPAR1_I2C_BIT_MASK;
gur->plppar1 |= PLPPAR1_I2C2_VAL;
gur->plpdir1 &= ~PLPDIR1_I2C_BIT_MASK;
gur->plpdir1 |= PLPDIR1_I2C2_VAL;
disable_8569mds_brd_eeprom_write_protect();
#endif
return 0;
}
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_NAND_BASE;
const u8 flash_esel = 0;
/*
* Remap Boot flash to caching-inhibited
* so that flash can be erased properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* invalidate existing TLB entry for flash */
disable_tlb(flash_esel);
set_tlb(1, flashbase, CONFIG_SYS_NAND_BASE, /* tlb, epn, rpn */
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, flash_esel, /* ts, esel */
BOOKE_PAGESZ_64M, 1); /* tsize, iprot */
return 0;
}
int checkboard (void)
{
printf ("Board: 8569 MDS\n");
return 0;
}
#if !defined(CONFIG_SPD_EEPROM)
phys_size_t fixed_sdram(void)
{
struct ccsr_ddr __iomem *ddr =
(struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
uint d_init;
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_SDRAM_MODE);
out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_SDRAM_MODE_2);
out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_SDRAM_INTERVAL);
out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_SDRAM_CLK_CNTL);
out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CNTL);
out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CNTL);
out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_SDRAM_CFG_2);
#if defined (CONFIG_DDR_ECC)
out_be32(&ddr->err_int_en, CONFIG_SYS_DDR_ERR_INT_EN);
out_be32(&ddr->err_disable, CONFIG_SYS_DDR_ERR_DIS);
out_be32(&ddr->err_sbe, CONFIG_SYS_DDR_SBE);
#endif
udelay(500);
out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
d_init = 1;
debug("DDR - 1st controller: memory initializing\n");
/*
* Poll until memory is initialized.
* 512 Meg at 400 might hit this 200 times or so.
*/
while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
udelay(1000);
}
debug("DDR: memory initialized\n\n");
udelay(500);
#endif
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
#endif
/*
* Initialize Local Bus
*/
void
local_bus_init(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
out_be32(&gur->lbiuiplldcr1, 0x00078080);
if (clkdiv == 16)
out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
else if (clkdiv == 8)
out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
else if (clkdiv == 4)
out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
out_be32(&lbc->lcrr, (u32)in_be32(&lbc->lcrr)| 0x00030000);
}
static void fdt_board_disable_serial(void *blob, bd_t *bd, const char *alias)
{
const char *status = "disabled";
int off;
int err;
off = fdt_path_offset(blob, alias);
if (off < 0) {
printf("WARNING: could not find %s alias: %s.\n", alias,
fdt_strerror(off));
return;
}
err = fdt_setprop(blob, off, "status", status, strlen(status) + 1);
if (err) {
printf("WARNING: could not set status for serial0: %s.\n",
fdt_strerror(err));
return;
}
}
/*
* Because of an erratum in prototype boards it is impossible to use eSDHC
* without disabling UART0 (which makes it quite easy to 'brick' the board
* by simply issung 'setenv hwconfig esdhc', and not able to interact with
* U-Boot anylonger).
*
* So, but default we assume that the board is a prototype, which is a most
* safe assumption. There is no way to determine board revision from a
* register, so we use hwconfig.
*/
static int prototype_board(void)
{
if (hwconfig_subarg("board", "rev", NULL))
return hwconfig_subarg_cmp("board", "rev", "prototype");
return 1;
}
static int esdhc_disables_uart0(void)
{
return prototype_board() ||
hwconfig_subarg_cmp("esdhc", "mode", "4-bits");
}
static void fdt_board_fixup_qe_uart(void *blob, bd_t *bd)
{
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
const char *devtype = "serial";
const char *compat = "ucc_uart";
const char *clk = "brg9";
u32 portnum = 0;
int off = -1;
if (!hwconfig("qe_uart"))
return;
if (hwconfig("esdhc") && esdhc_disables_uart0()) {
printf("QE UART: won't enable with esdhc.\n");
return;
}
fdt_board_disable_serial(blob, bd, "serial1");
while (1) {
const u32 *idx;
int len;
off = fdt_node_offset_by_compatible(blob, off, "ucc_geth");
if (off < 0) {
printf("WARNING: unable to fixup device tree for "
"QE UART\n");
return;
}
idx = fdt_getprop(blob, off, "cell-index", &len);
if (!idx || len != sizeof(*idx) || *idx != fdt32_to_cpu(2))
continue;
break;
}
fdt_setprop(blob, off, "device_type", devtype, strlen(devtype) + 1);
fdt_setprop(blob, off, "compatible", compat, strlen(compat) + 1);
fdt_setprop(blob, off, "tx-clock-name", clk, strlen(clk) + 1);
fdt_setprop(blob, off, "rx-clock-name", clk, strlen(clk) + 1);
fdt_setprop(blob, off, "port-number", &portnum, sizeof(portnum));
setbits_8(&bcsr[15], BCSR15_QEUART_EN);
}
#ifdef CONFIG_FSL_ESDHC
int board_mmc_init(bd_t *bd)
{
struct ccsr_gur *gur = (struct ccsr_gur *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
u8 bcsr6 = BCSR6_SD_CARD_1BIT;
if (!hwconfig("esdhc"))
return 0;
printf("Enabling eSDHC...\n"
" For eSDHC to function, I2C2 ");
if (esdhc_disables_uart0()) {
printf("and UART0 should be disabled.\n");
printf(" Redirecting stderr, stdout and stdin to UART1...\n");
console_assign(stderr, "eserial1");
console_assign(stdout, "eserial1");
console_assign(stdin, "eserial1");
printf("Switched to UART1 (initial log has been printed to "
"UART0).\n");
clrsetbits_be32(&gur->plppar1, PLPPAR1_UART0_BIT_MASK,
PLPPAR1_ESDHC_4BITS_VAL);
clrsetbits_be32(&gur->plpdir1, PLPDIR1_UART0_BIT_MASK,
PLPDIR1_ESDHC_4BITS_VAL);
bcsr6 |= BCSR6_SD_CARD_4BITS;
} else {
printf("should be disabled.\n");
}
/* Assign I2C2 signals to eSDHC. */
clrsetbits_be32(&gur->plppar1, PLPPAR1_I2C_BIT_MASK,
PLPPAR1_ESDHC_VAL);
clrsetbits_be32(&gur->plpdir1, PLPDIR1_I2C_BIT_MASK,
PLPDIR1_ESDHC_VAL);
/* Mux I2C2 (and optionally UART0) signals to eSDHC. */
setbits_8(&bcsr[6], bcsr6);
return fsl_esdhc_mmc_init(bd);
}
static void fdt_board_fixup_esdhc(void *blob, bd_t *bd)
{
const char *status = "disabled";
int off = -1;
if (!hwconfig("esdhc"))
return;
if (esdhc_disables_uart0())
fdt_board_disable_serial(blob, bd, "serial0");
while (1) {
const u32 *idx;
int len;
off = fdt_node_offset_by_compatible(blob, off, "fsl-i2c");
if (off < 0)
break;
idx = fdt_getprop(blob, off, "cell-index", &len);
if (!idx || len != sizeof(*idx))
continue;
if (*idx == 1) {
fdt_setprop(blob, off, "status", status,
strlen(status) + 1);
break;
}
}
if (hwconfig_subarg_cmp("esdhc", "mode", "4-bits")) {
off = fdt_node_offset_by_compatible(blob, -1, "fsl,esdhc");
if (off < 0) {
printf("WARNING: could not find esdhc node\n");
return;
}
fdt_delprop(blob, off, "sdhci,1-bit-only");
}
}
#else
static inline void fdt_board_fixup_esdhc(void *blob, bd_t *bd) {}
#endif
static void fdt_board_fixup_qe_usb(void *blob, bd_t *bd)
{
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR_BASE;
if (hwconfig_subarg_cmp("qe_usb", "speed", "low"))
clrbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
else
setbits_8(&bcsr[17], BCSR17_nUSBLOWSPD);
if (hwconfig_subarg_cmp("qe_usb", "mode", "peripheral")) {
clrbits_8(&bcsr[17], BCSR17_USBVCC);
clrbits_8(&bcsr[17], BCSR17_USBMODE);
do_fixup_by_compat(blob, "fsl,mpc8569-qe-usb", "mode",
"peripheral", sizeof("peripheral"), 1);
} else {
setbits_8(&bcsr[17], BCSR17_USBVCC);
setbits_8(&bcsr[17], BCSR17_USBMODE);
}
clrbits_8(&bcsr[17], BCSR17_nUSBEN);
}
#ifdef CONFIG_PCI
void pci_init_board(void)
{
#if defined(CONFIG_PQ_MDS_PIB)
pib_init();
#endif
fsl_pcie_init_board(0);
}
#endif /* CONFIG_PCI */
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_SYS_UCC_RMII_MODE)
int nodeoff, off, err;
unsigned int val;
const u32 *ph;
const u32 *index;
/* fixup device tree for supporting rmii mode */
nodeoff = -1;
while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff,
"ucc_geth")) >= 0) {
err = fdt_setprop_string(blob, nodeoff, "tx-clock-name",
"clk16");
if (err < 0) {
printf("WARNING: could not set tx-clock-name %s.\n",
fdt_strerror(err));
break;
}
err = fdt_fixup_phy_connection(blob, nodeoff,
PHY_INTERFACE_MODE_RMII);
if (err < 0) {
printf("WARNING: could not set phy-connection-type "
"%s.\n", fdt_strerror(err));
break;
}
index = fdt_getprop(blob, nodeoff, "cell-index", 0);
if (index == NULL) {
printf("WARNING: could not get cell-index of ucc\n");
break;
}
ph = fdt_getprop(blob, nodeoff, "phy-handle", 0);
if (ph == NULL) {
printf("WARNING: could not get phy-handle of ucc\n");
break;
}
off = fdt_node_offset_by_phandle(blob, *ph);
if (off < 0) {
printf("WARNING: could not get phy node %s.\n",
fdt_strerror(err));
break;
}
val = 0x7 + *index; /* RMII phy address starts from 0x8 */
err = fdt_setprop(blob, off, "reg", &val, sizeof(u32));
if (err < 0) {
printf("WARNING: could not set reg for phy-handle "
"%s.\n", fdt_strerror(err));
break;
}
}
#endif
ft_cpu_setup(blob, bd);
FT_FSL_PCI_SETUP;
fdt_board_fixup_esdhc(blob, bd);
fdt_board_fixup_qe_uart(blob, bd);
fdt_board_fixup_qe_usb(blob, bd);
return 0;
}
#endif
Reference in a new issue View git blame Copy permalink