mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
bb772a5944
Add the emif configurations required for omap5 soc.Add the correct ddr part configurations required for omap5 evm board. EDB8164B3PH from ELPIDA is the part used on the board. Also changes are done to retain some part of the code common for OMAP4/5 and keep only the remaining in the Soc specific directories. Signed-off-by: sricharan <r.sricharan@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
129 lines
3.3 KiB
C
129 lines
3.3 KiB
C
/*
|
|
* EMIF programming
|
|
*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/utils.h>
|
|
|
|
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
|
|
u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
|
|
u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
|
|
u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
|
|
/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
|
|
static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
|
|
.max_freq = 400000000,
|
|
.RL = 6,
|
|
.tRPab = 21,
|
|
.tRCD = 18,
|
|
.tWR = 15,
|
|
.tRASmin = 42,
|
|
.tRRD = 10,
|
|
.tWTRx2 = 15,
|
|
.tXSR = 140,
|
|
.tXPx2 = 15,
|
|
.tRFCab = 130,
|
|
.tRTPx2 = 15,
|
|
.tCKE = 3,
|
|
.tCKESR = 15,
|
|
.tZQCS = 90,
|
|
.tZQCL = 360,
|
|
.tZQINIT = 1000,
|
|
.tDQSCKMAXx2 = 11,
|
|
.tRASmax = 70,
|
|
.tFAW = 50
|
|
};
|
|
|
|
/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
|
|
static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
|
|
.max_freq = 200000000,
|
|
.RL = 3,
|
|
.tRPab = 21,
|
|
.tRCD = 18,
|
|
.tWR = 15,
|
|
.tRASmin = 42,
|
|
.tRRD = 10,
|
|
.tWTRx2 = 20,
|
|
.tXSR = 140,
|
|
.tXPx2 = 15,
|
|
.tRFCab = 130,
|
|
.tRTPx2 = 15,
|
|
.tCKE = 3,
|
|
.tCKESR = 15,
|
|
.tZQCS = 90,
|
|
.tZQCL = 360,
|
|
.tZQINIT = 1000,
|
|
.tDQSCKMAXx2 = 11,
|
|
.tRASmax = 70,
|
|
.tFAW = 50
|
|
};
|
|
|
|
/*
|
|
* Min tCK values specified by JESD209-2
|
|
* Min tCK specifies the minimum duration of some AC timing parameters in terms
|
|
* of the number of cycles. If the calculated number of cycles based on the
|
|
* absolute time value is less than the min tCK value, min tCK value should
|
|
* be used instead. This typically happens at low frequencies.
|
|
*/
|
|
static const struct lpddr2_min_tck min_tck_jedec = {
|
|
.tRL = 3,
|
|
.tRP_AB = 3,
|
|
.tRCD = 3,
|
|
.tWR = 3,
|
|
.tRAS_MIN = 3,
|
|
.tRRD = 2,
|
|
.tWTR = 2,
|
|
.tXP = 2,
|
|
.tRTP = 2,
|
|
.tCKE = 3,
|
|
.tCKESR = 3,
|
|
.tFAW = 8
|
|
};
|
|
|
|
static const struct lpddr2_ac_timings const*
|
|
jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
|
|
&timings_jedec_200_mhz,
|
|
&timings_jedec_400_mhz
|
|
};
|
|
|
|
static const struct lpddr2_device_timings jedec_default_timings = {
|
|
.ac_timings = jedec_ac_timings,
|
|
.min_tck = &min_tck_jedec
|
|
};
|
|
|
|
void emif_get_device_timings(u32 emif_nr,
|
|
const struct lpddr2_device_timings **cs0_device_timings,
|
|
const struct lpddr2_device_timings **cs1_device_timings)
|
|
{
|
|
/* Assume Identical devices on EMIF1 & EMIF2 */
|
|
*cs0_device_timings = &jedec_default_timings;
|
|
*cs1_device_timings = &jedec_default_timings;
|
|
}
|
|
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
|