u-boot/board/eXalion/eXalion.c
wdenk 80885a9d52 * Patch by Markus Pietrek, 24 Feb 2004:
NS9750 DevBoard added

* Patch by Pierre AUBERT, 24 Feb 2004
  add USB support for MPC5200

* Patch by Steven Scholz, 24 Feb 2004:
  - fix MII commands to use values from last command

* Patch by Torsten Demke, 24 Feb 2004:
  Add support for the eXalion platform (SPSW-8240, F-30, F-300)
2004-02-26 23:46:20 +00:00

292 lines
7.1 KiB
C

/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2002
* Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc824x.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <pci.h>
#include <ide.h>
#include "piix_pci.h"
#include "eXalion.h"
int checkboard (void)
{
ulong busfreq = get_bus_freq (0);
char buf[32];
printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
printf ("Built: %s at %s\n", __DATE__, __TIME__);
printf ("Local Bus: %s MHz\n", strmhz (buf, busfreq));
return 0;
}
int checkflash (void)
{
printf ("checkflash\n");
flash_init ();
return (0);
}
long int initdram (int board_type)
{
int i, cnt;
volatile uchar *base = CFG_SDRAM_BASE;
volatile ulong *addr;
ulong save[32];
ulong val, ret = 0;
for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
cnt >>= 1) {
addr = (volatile ulong *) base + cnt;
save[i++] = *addr;
*addr = ~cnt;
}
addr = (volatile ulong *) base;
save[i] = *addr;
*addr = 0;
if (*addr != 0) {
*addr = save[i];
goto Done;
}
for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
addr = (volatile ulong *) base + cnt;
val = *addr;
*addr = save[--i];
if (val != ~cnt) {
ulong new_bank0_end = cnt * sizeof (long) - 1;
ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);
mear1 = (mear1 & 0xFFFFFF00) |
((new_bank0_end & MICR_ADDR_MASK) >>
MICR_ADDR_SHIFT);
emear1 = (emear1 & 0xFFFFFF00) |
((new_bank0_end & MICR_ADDR_MASK) >>
MICR_EADDR_SHIFT);
mpc824x_mpc107_setreg (MEAR1, mear1);
mpc824x_mpc107_setreg (EMEAR1, emear1);
ret = cnt * sizeof (long);
goto Done;
}
}
ret = CFG_MAX_RAM_SIZE;
Done:
return ret;
}
int misc_init_r (void)
{
pci_dev_t bdf;
u32 val32;
u8 val8;
puts ("ISA: ");
bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
if (bdf == -1) {
puts ("Unable to find PIIX4 ISA bridge !\n");
hang ();
}
/* set device for normal ISA instead EIO */
pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
val32 |= 0x00000001;
pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
PCI_DEV (bdf), PCI_FUNC (bdf));
puts ("ISA: ");
bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
if (bdf == -1) {
puts ("Unable to find PIIX4 IDE controller !\n");
hang ();
}
/* Init BMIBA register */
/* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
/* val32 |= 0x1000; */
/* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */
/* Enable BUS master and IO access */
val32 = PCI_COMMAND_MASTER | PCI_COMMAND_IO;
pci_write_config_dword (bdf, PCI_COMMAND, val32);
/* Set latency */
pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
val8 = 0x40;
pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);
/* Enable Primary ATA/IDE */
pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
/* val32 = 0xa307a307; */
val32 = 0x00008000;
pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);
printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
PCI_DEV (bdf), PCI_FUNC (bdf));
/* Try to get FAT working... */
/* fat_register_read(ide_read); */
return (0);
}
/*
* Show/Init PCI devices on the specified bus number.
*/
void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
{
unsigned char line;
switch (PCI_DEV (dev)) {
case 16:
line = PCI_INT_A;
break;
case 17:
line = PCI_INT_B;
break;
case 18:
line = PCI_INT_C;
break;
case 19:
line = PCI_INT_D;
break;
#if defined (CONFIG_MPC8245)
case 20:
line = PCI_INT_A;
break;
case 21:
line = PCI_INT_B;
break;
case 22:
line = PCI_INT_NA;
break;
#endif
default:
line = PCI_INT_A;
break;
}
pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
}
/*
* Initialize PCI Devices, report devices found.
*/
#ifndef CONFIG_PCI_PNP
#if defined (CONFIG_MPC8240)
static struct pci_config_table pci_eXalion_config_table[] = {
{
/* Intel 82559ER ethernet controller */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER}},
{
/* Intel 82371AB PIIX4 PCI to ISA bridge */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
pci_cfgfunc_config_device, {0,
0,
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
{
/* Intel 82371AB PIIX4 IDE controller */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
pci_cfgfunc_config_device, {0,
0,
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
{}
};
#elif defined (CONFIG_MPC8245)
static struct pci_config_table pci_eXalion_config_table[] = {
{
/* Intel 82559ER ethernet controller */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER}},
{
/* Intel 82559ER ethernet controller */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
PCI_ENET1_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER}},
{
/* Broadcom BCM5690 Gigabit switch */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
PCI_ENET2_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER}},
{
/* Broadcom BCM5690 Gigabit switch */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
PCI_ENET3_MEMADDR,
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER}},
{
/* Intel 82371AB PIIX4 PCI to ISA bridge */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
pci_cfgfunc_config_device, {0,
0,
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
{
/* Intel 82371AB PIIX4 IDE controller */
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
pci_cfgfunc_config_device, {0,
0,
PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
{}
};
#else
#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
#endif
#endif /* #ifndef CONFIG_PCI_PNP */
struct pci_controller hose = {
#ifndef CONFIG_PCI_PNP
config_table:pci_eXalion_config_table,
fixup_irq:pci_eXalion_fixup_irq,
#endif
};
void pci_init_board (void)
{
pci_mpc824x_init (&hose);
}