mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
34d117b1fb
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Suggested-by: Yunir Salimzyanov <yunir@synopsys.com>
128 lines
5.6 KiB
Text
128 lines
5.6 KiB
Text
================================================================================
|
|
Useful notes on bulding and using of U-Boot on ARC HS Development Kit (AKA HSDK)
|
|
================================================================================
|
|
|
|
BOARD OVERVIEW
|
|
|
|
The DesignWare ARC HS Development Kit is a ready-to-use platform for rapid
|
|
software development on the ARC HS3x family of processors.
|
|
|
|
For more information please visit:
|
|
https://www.synopsys.com/dw/ipdir.php?ds=arc-hs-development-kit
|
|
|
|
User guide is availalble here:
|
|
https://github.com/foss-for-synopsys-dwc-arc-processors/ARC-Development-Systems-Forum/wiki/docs/ARC_HSDK_User_Guide.pdf
|
|
|
|
It has the following features useful for U-Boot:
|
|
* On-board 2-channel FTDI TTL-to-USB converter
|
|
- The first channel is used for serial debug port (which makes it possible
|
|
to use a serial connection on pretty much any host machine be it
|
|
Windows, Linux or Mac).
|
|
On Linux machine typucally FTDI serial port would be /dev/ttyUSB0.
|
|
There's no HW flow-control and baud-rate is 115200.
|
|
|
|
- The second channel is used for built-in Digilent USB JTAG probe.
|
|
That means no extra hardware is required to access ARC core from a
|
|
debugger on development host. Both proprietary MetaWare debugger and
|
|
open source OpenOCD + GDB client are supported.
|
|
|
|
- Also with help of this FTDI chip it is possible to reset entire
|
|
board with help of a special `rff-ftdi-reset` utility, see:
|
|
https://github.com/foss-for-synopsys-dwc-arc-processors/rff-ftdi-reset
|
|
|
|
* Micro SD-card slot
|
|
- U-Boot expects to see the very first partition on the card formatted as
|
|
FAT file-system and uses it for keeping its environment in `uboot.env`
|
|
file. Note uboot.env is not just a text file but it is auto-generated
|
|
file created by U-Boot on invocation of `saveenv` command.
|
|
It contains a checksum which makes this saved environment invalid in
|
|
case of maual modification.
|
|
|
|
- There might be more useful files on that first FAT partition like
|
|
Linux kernl image in form of uImage (with or without built-in
|
|
initramfs), device tree blob (.dtb) etc.
|
|
|
|
- Except FAT partition there might be others following the first FAT one
|
|
like Ext file-system with rootfs etc.
|
|
|
|
* 1 Gb Ethernet socket
|
|
- U-Boot might get payload from TFTP server. This might be uImage, rootfs
|
|
image and anything else.
|
|
|
|
* 2 MiB of SPI-flash
|
|
- SPI-flahs is used as a storage for image of an application auto-executed
|
|
by bootROM on power-on. Typically U-Boot gets programmed there but
|
|
there might be other uses. But note bootROM expects to find a special
|
|
header preceeding application image itself so before flashing anything
|
|
make sure required image is prepended. In case of U-Boot this is done
|
|
by invocation of `headerize-hsdk.py` with `make bsp-generate` command.
|
|
|
|
|
|
BUILDING U-BOOT
|
|
|
|
1. Configure U-Boot:
|
|
------------------------->8----------------------
|
|
make hsdk_defconfig
|
|
------------------------->8----------------------
|
|
|
|
2. To build Elf file (for example to be used with host debugger via JTAG
|
|
connection to the target board):
|
|
------------------------->8----------------------
|
|
make mdbtrick
|
|
------------------------->8----------------------
|
|
|
|
This will produce `u-boot` Elf file.
|
|
|
|
3. To build artifacts required for U-Boot update in n-board SPI-flash:
|
|
------------------------->8----------------------
|
|
make bsp-generate
|
|
------------------------->8----------------------
|
|
|
|
This will produce `u-boot.head` and `u-boot-update.scr` which should
|
|
be put on the first FAT partition of micro SD-card to be inserted in the
|
|
HSDK board.
|
|
|
|
Note that Python3 script is used for generation of a header, thus
|
|
to get that done it's required to have Python3 with "pyelftools" installed.
|
|
|
|
"pyelftools" could be installed with help of "pip" even w/o root rights:
|
|
------------------------->8----------------------
|
|
python3 -m pip install --user pyelftools
|
|
------------------------->8----------------------
|
|
|
|
EXECUTING U-BOOT
|
|
|
|
1. The HSDK board is supposed to auto-start U-Boot image stored in on-board
|
|
SPI-flash on power-on. For that make sure DIP-switches in the corner of
|
|
the board are in their default positions: BIM in 1:off, 2:on state
|
|
while both BMC and BCS should be in 1:on, 2:on state.
|
|
|
|
2. Though it is possible to load U-Boot as a simple Elf file via JTAG right
|
|
in DDR and start it from the debugger.
|
|
|
|
2.1. In case of proprietary MetaWare debugger run:
|
|
------------------------->8----------------------
|
|
mdb -digilent -run -cl u-boot
|
|
------------------------->8----------------------
|
|
|
|
|
|
UPDATION U-BOOT IMAGE IN ON-BOARD SPI-FLASH
|
|
|
|
1. Create `u-boot.head` and `u-boot-update.scr` as discribed above with
|
|
`make bsp-generate` command.
|
|
|
|
2. Copy `u-boot.head` and `u-boot-update.scr` to the first FAT partition
|
|
of micro SD-card.
|
|
|
|
3. Connect USB cable from the HSDK board to the developemnt host and
|
|
fire-up serial terminal.
|
|
|
|
3. Insert prepared micro SD-card in the HSDK board, press reset button
|
|
and stop auto-execution of existing `bootcmd` pressing any key in serial
|
|
terminal and enter the following command:
|
|
------------------------->8----------------------
|
|
mmc rescan && fatload mmc 0:1 ${loadaddr} u-boot-update.scr && source ${loadaddr}
|
|
------------------------->8----------------------
|
|
Wait before you see "u-boot update: OK" message.
|
|
|
|
4. Press RESET button and enjoy updated U-Boot version.
|