u-boot/arch/arm/include/asm/arch-lpc32xx/gpio_grp.h
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

39 lines
1.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* LPC32xx GPIO interface macro for pin mapping.
*
* (C) Copyright 2015 DENX Software Engineering GmbH
* Written-by: Sylvain Lemieux <slemieux@@tycoint.com>
*/
#ifndef _LPC32XX_GPIO_GRP_H
#define _LPC32XX_GPIO_GRP_H
/*
* Macro to map the pin for the lpc32xx_gpio driver.
* Note: - GPIOS are considered here as homogeneous and linear from 0 to 159;
* mapping is done per register, as group of 32.
* (see drivers/gpio/lpc32xx_gpio.c for details).
* - macros can be use with the following pins:
* P0.0 - P0.7
* P1.0 - P1.23
* P2.0 - P2.12
* P3 GPI_0 - GPI_9 / GPI_15 - GPI_23 / GPI_25 / GPI_27 - GPI_28
* P3 GPO_0 - GPO_23
* P3 GPIO_0 - GPIO_5 (output register only)
*/
#define LPC32XX_GPIO_P0_GRP 0
#define LPC32XX_GPIO_P1_GRP 32
#define LPC32XX_GPIO_P2_GRP 64
#define LPC32XX_GPO_P3_GRP 96
#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPO_P3_GRP + 25)
#define LPC32XX_GPI_P3_GRP 128
/*
* A specific GPIO can be selected with this macro
* ie, GPIO P0.1 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P0_GRP, 1)
* See the LPC32x0 User's guide for GPIO group numbers
*/
#define LPC32XX_GPIO(x, y) ((x) + (y))
#endif /* _LPC32XX_GPIO_GRP_H */