mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 22:20:45 +00:00
b59e031a7d
phy-supply is now handled at uclass level. Remove it from the drivers that implement it at the driver level. Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Suggested-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
171 lines
3.9 KiB
C
171 lines
3.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Meson G12A USB2 PHY driver
|
|
*
|
|
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
* Copyright (C) 2019 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstron@baylibre.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
#include <bitfield.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <generic-phy.h>
|
|
#include <regmap.h>
|
|
#include <linux/delay.h>
|
|
#include <power/regulator.h>
|
|
#include <reset.h>
|
|
#include <clk.h>
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/compat.h>
|
|
|
|
#define PHY_CTRL_R0 0x0
|
|
#define PHY_CTRL_R1 0x4
|
|
#define PHY_CTRL_R2 0x8
|
|
#define PHY_CTRL_R3 0xc
|
|
#define PHY_CTRL_R4 0x10
|
|
#define PHY_CTRL_R5 0x14
|
|
#define PHY_CTRL_R6 0x18
|
|
#define PHY_CTRL_R7 0x1c
|
|
#define PHY_CTRL_R8 0x20
|
|
#define PHY_CTRL_R9 0x24
|
|
#define PHY_CTRL_R10 0x28
|
|
#define PHY_CTRL_R11 0x2c
|
|
#define PHY_CTRL_R12 0x30
|
|
#define PHY_CTRL_R13 0x34
|
|
#define PHY_CTRL_R14 0x38
|
|
#define PHY_CTRL_R15 0x3c
|
|
#define PHY_CTRL_R16 0x40
|
|
#define PHY_CTRL_R17 0x44
|
|
#define PHY_CTRL_R18 0x48
|
|
#define PHY_CTRL_R19 0x4c
|
|
#define PHY_CTRL_R20 0x50
|
|
#define PHY_CTRL_R21 0x54
|
|
#define PHY_CTRL_R22 0x58
|
|
#define PHY_CTRL_R23 0x5c
|
|
|
|
#define RESET_COMPLETE_TIME 1000
|
|
#define PLL_RESET_COMPLETE_TIME 100
|
|
|
|
struct phy_meson_g12a_usb2_priv {
|
|
struct regmap *regmap;
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct clk clk;
|
|
#endif
|
|
struct reset_ctl reset;
|
|
};
|
|
|
|
static int phy_meson_g12a_usb2_init(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = reset_assert(&priv->reset);
|
|
udelay(1);
|
|
ret |= reset_deassert(&priv->reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
udelay(RESET_COMPLETE_TIME);
|
|
|
|
/* usb2_otg_aca_en == 0 */
|
|
regmap_update_bits(priv->regmap, PHY_CTRL_R21, BIT(2), 0);
|
|
|
|
/* PLL Setup : 24MHz * 20 / 1 = 480MHz */
|
|
regmap_write(priv->regmap, PHY_CTRL_R16, 0x39400414);
|
|
regmap_write(priv->regmap, PHY_CTRL_R17, 0x927e0000);
|
|
regmap_write(priv->regmap, PHY_CTRL_R18, 0xac5f49e5);
|
|
|
|
udelay(PLL_RESET_COMPLETE_TIME);
|
|
|
|
/* UnReset PLL */
|
|
regmap_write(priv->regmap, PHY_CTRL_R16, 0x19400414);
|
|
|
|
/* PHY Tuning */
|
|
regmap_write(priv->regmap, PHY_CTRL_R20, 0xfe18);
|
|
regmap_write(priv->regmap, PHY_CTRL_R4, 0x8000fff);
|
|
|
|
/* Tuning Disconnect Threshold */
|
|
regmap_write(priv->regmap, PHY_CTRL_R3, 0x34);
|
|
|
|
/* Analog Settings */
|
|
regmap_write(priv->regmap, PHY_CTRL_R14, 0);
|
|
regmap_write(priv->regmap, PHY_CTRL_R13, 0x78000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_meson_g12a_usb2_exit(struct phy *phy)
|
|
{
|
|
struct udevice *dev = phy->dev;
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = reset_assert(&priv->reset);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct phy_ops meson_g12a_usb2_phy_ops = {
|
|
.init = phy_meson_g12a_usb2_init,
|
|
.exit = phy_meson_g12a_usb2_exit,
|
|
};
|
|
|
|
int meson_g12a_usb2_phy_probe(struct udevice *dev)
|
|
{
|
|
struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_get_by_index(dev, 0, &priv->reset);
|
|
if (ret == -ENOTSUPP)
|
|
return 0;
|
|
else if (ret)
|
|
return ret;
|
|
|
|
ret = reset_deassert(&priv->reset);
|
|
if (ret) {
|
|
reset_release_all(&priv->reset, 1);
|
|
return ret;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_get_by_index(dev, 0, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&priv->clk);
|
|
if (ret && ret != -ENOSYS && ret != -ENOTSUPP) {
|
|
pr_err("failed to enable PHY clock\n");
|
|
clk_free(&priv->clk);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id meson_g12a_usb2_phy_ids[] = {
|
|
{ .compatible = "amlogic,g12a-usb2-phy" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_g12a_usb2_phy) = {
|
|
.name = "meson_g12a_usb2_phy",
|
|
.id = UCLASS_PHY,
|
|
.of_match = meson_g12a_usb2_phy_ids,
|
|
.probe = meson_g12a_usb2_phy_probe,
|
|
.ops = &meson_g12a_usb2_phy_ops,
|
|
.priv_auto = sizeof(struct phy_meson_g12a_usb2_priv),
|
|
};
|