mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-17 16:53:06 +00:00
1feac813fe
With the first redesign the debug UART had changed from UART2 to UART1. As the first hardware revision is considered as alpha and will not be supported in future. The old setup will not be preserved. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de>
205 lines
5 KiB
Text
205 lines
5 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2020 PHYTEC Messtechnik GmbH
|
|
* Author: Teresa Remmet <t.remmet@phytec.de>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/leds/leds-pca9532.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
#include "imx8mp-phycore-som.dtsi"
|
|
|
|
/ {
|
|
model = "PHYTEC phyBOARD-Pollux i.MX8MP";
|
|
compatible = "phytec,imx8mp-phyboard-pollux-rdk",
|
|
"phytec,imx8mp-phycore-som", "fsl,imx8mp";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2 {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
|
|
regulator-name = "VSD_3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
startup-delay-us = <100>;
|
|
off-on-delay-us = <12000>;
|
|
};
|
|
};
|
|
|
|
&eqos {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_eqos>;
|
|
phy-mode = "rgmii-id";
|
|
phy-handle = <ðphy0>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x1>;
|
|
ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
|
|
ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
|
|
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
|
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
|
|
enet-phy-lane-no-swap;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
pinctrl-1 = <&pinctrl_i2c2_gpio>;
|
|
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
status = "okay";
|
|
|
|
eeprom@51 {
|
|
compatible = "atmel,24c02";
|
|
reg = <0x51>;
|
|
pagesize = <16>;
|
|
};
|
|
|
|
leds@62 {
|
|
compatible = "nxp,pca9533";
|
|
reg = <0x62>;
|
|
|
|
led1 {
|
|
type = <PCA9532_TYPE_LED>;
|
|
};
|
|
|
|
led2 {
|
|
type = <PCA9532_TYPE_LED>;
|
|
};
|
|
|
|
led3 {
|
|
type = <PCA9532_TYPE_LED>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&snvs_pwrkey {
|
|
status = "okay";
|
|
};
|
|
|
|
/* debug console */
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* SD-Card */
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_pins>;
|
|
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl_eqos: eqosgrp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
|
|
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
|
|
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
|
|
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
|
|
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
|
|
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
|
|
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
|
|
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
|
|
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
|
|
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
|
|
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
|
|
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
|
|
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
|
|
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
|
|
MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x10
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3
|
|
MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2_gpio: i2c2gpiogrp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x1e3
|
|
MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x1e3
|
|
>;
|
|
};
|
|
|
|
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x49
|
|
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_pins: usdhc2-gpiogrp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: usdhc2grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
>;
|
|
};
|
|
};
|