mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
2cc6cde647
Using DMA to load TF-A into SRAM fails when booting from eMMC on RK3588. ## Checking hash(es) for Image atf-3 ... sha256 error! Bad hash value for 'hash' hash node in 'atf-3' image node spl_load_simple_fit: can't load image loadables index 2 (ret = -1) mmc_load_image_raw_sector: mmc block read error Fix this by using PIO mode in SPL and limit the number of blocks used in a single read command to avoid triggering Data End Bit Error interrupt. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
71 lines
2 KiB
Text
71 lines
2 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_COUNTER_FREQUENCY=24000000
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_TEXT_BASE=0x00a00000
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3588-rock-5b"
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_ROCKCHIP_RK3588=y
|
|
CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
|
|
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
|
|
CONFIG_SPL_MMC=y
|
|
CONFIG_SPL_SERIAL=y
|
|
CONFIG_SPL_STACK_R_ADDR=0x600000
|
|
CONFIG_TARGET_ROCK5B_RK3588=y
|
|
CONFIG_SPL_STACK=0x400000
|
|
CONFIG_DEBUG_UART_BASE=0xFEB50000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_SYS_LOAD_ADDR=0xc00800
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_SPL_FIT_SIGNATURE=y
|
|
CONFIG_SPL_LOAD_FIT=y
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-rock-5b.dtb"
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_SPL_MAX_SIZE=0x20000
|
|
CONFIG_SPL_PAD_TO=0x7f8000
|
|
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
|
CONFIG_SPL_BSS_START_ADDR=0x4000000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x4000
|
|
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_ATF=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_MMC=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_OF_LIVE=y
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_SPL_REGMAP=y
|
|
CONFIG_SPL_SYSCON=y
|
|
CONFIG_SPL_CLK=y
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
CONFIG_MISC=y
|
|
CONFIG_SUPPORT_EMMC_RPMB=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_SDMA=y
|
|
# CONFIG_SPL_MMC_SDHCI_SDMA is not set
|
|
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
CONFIG_REGULATOR_PWM=y
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
CONFIG_SPL_RAM=y
|
|
CONFIG_BAUDRATE=1500000
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_ERRNO_STR=y
|