mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
a502a87bc0
The patch contains several DT files for SOM platform. Carrier card is sck-kv (KV260) revA/B. SMK-K26 is description for starter kit which doesn't have EMMC populated. And SM-K26 is full som with EMMC. Files are divided in this way to make sure that SOM can be plugged to different carrier card and all peripherals on SOM (or defined by a spec) can be used by U-Boot. Full DT for SOM+CC can be merged together as overlays. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
373 lines
7.8 KiB
Text
373 lines
7.8 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
||
/*
|
||
* dts file for KV260 revA Carrier Card
|
||
*
|
||
* (C) Copyright 2020, Xilinx, Inc.
|
||
*
|
||
* SD level shifter:
|
||
* "A" – A01 board un-modified (NXP)
|
||
* "Y" – A01 board modified with legacy interposer (Nexperia)
|
||
* "Z" – A01 board modified with Diode interposer
|
||
*
|
||
* Michal Simek <michal.simek@xilinx.com>
|
||
*/
|
||
|
||
#include <dt-bindings/gpio/gpio.h>
|
||
#include <dt-bindings/net/ti-dp83867.h>
|
||
#include <dt-bindings/phy/phy.h>
|
||
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
|
||
|
||
/dts-v1/;
|
||
/plugin/;
|
||
|
||
/{
|
||
compatible = "xlnx,zynqmp-sk-kv260-revA",
|
||
"xlnx,zynqmp-sk-kv260-revY",
|
||
"xlnx,zynqmp-sk-kv260-revZ",
|
||
"xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
|
||
|
||
fragment1 {
|
||
target = <&i2c1>; /* I2C_SCK C23/C24 - MIO from SOM */
|
||
|
||
__overlay__ {
|
||
#address-cells = <1>;
|
||
#size-cells = <0>;
|
||
pinctrl-names = "default", "gpio";
|
||
pinctrl-0 = <&pinctrl_i2c1_default>;
|
||
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
||
scl-gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
|
||
sda-gpios = <&gpio 25 GPIO_ACTIVE_HIGH>;
|
||
|
||
u14: ina260@40 { /* u14 */
|
||
compatible = "ti,ina260";
|
||
#io-channel-cells = <1>;
|
||
label = "ina260-u14";
|
||
reg = <0x40>;
|
||
};
|
||
/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
|
||
};
|
||
};
|
||
|
||
fragment1a {
|
||
target = <&amba>;
|
||
__overlay__ {
|
||
ina260-u14 {
|
||
compatible = "iio-hwmon";
|
||
io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
|
||
};
|
||
|
||
si5332_0: si5332_0 { /* u17 */
|
||
compatible = "fixed-clock";
|
||
#clock-cells = <0>;
|
||
clock-frequency = <125000000>;
|
||
};
|
||
|
||
si5332_1: si5332_1 { /* u17 */
|
||
compatible = "fixed-clock";
|
||
#clock-cells = <0>;
|
||
clock-frequency = <25000000>;
|
||
};
|
||
|
||
si5332_2: si5332_2 { /* u17 */
|
||
compatible = "fixed-clock";
|
||
#clock-cells = <0>;
|
||
clock-frequency = <48000000>;
|
||
};
|
||
|
||
si5332_3: si5332_3 { /* u17 */
|
||
compatible = "fixed-clock";
|
||
#clock-cells = <0>;
|
||
clock-frequency = <24000000>;
|
||
};
|
||
|
||
si5332_4: si5332_4 { /* u17 */
|
||
compatible = "fixed-clock";
|
||
#clock-cells = <0>;
|
||
clock-frequency = <26000000>;
|
||
};
|
||
|
||
si5332_5: si5332_5 { /* u17 */
|
||
compatible = "fixed-clock";
|
||
#clock-cells = <0>;
|
||
clock-frequency = <27000000>;
|
||
};
|
||
};
|
||
};
|
||
|
||
/* DP/USB 3.0 and SATA */
|
||
fragment2 {
|
||
target = <&psgtr>;
|
||
__overlay__ {
|
||
status = "okay";
|
||
/* pcie, usb3, sata */
|
||
clocks = <&si5332_5>, <&si5332_4>, <&si5332_0>;
|
||
clock-names = "ref0", "ref1", "ref2";
|
||
};
|
||
};
|
||
|
||
fragment3 {
|
||
target = <&sata>;
|
||
__overlay__ {
|
||
status = "okay";
|
||
/* SATA OOB timing settings */
|
||
ceva,p0-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
|
||
ceva,p0-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
|
||
ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
||
ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
||
ceva,p1-cominit-params = /bits/ 8 <0x18 0x40 0x18 0x28>;
|
||
ceva,p1-comwake-params = /bits/ 8 <0x06 0x14 0x08 0x0E>;
|
||
ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
|
||
ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
|
||
phy-names = "sata-phy";
|
||
phys = <&psgtr 3 PHY_TYPE_SATA 1 2>;
|
||
};
|
||
};
|
||
|
||
fragment4 {
|
||
target = <&zynqmp_dpsub>;
|
||
__overlay__ {
|
||
status = "disabled";
|
||
phy-names = "dp-phy0", "dp-phy1";
|
||
phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
|
||
};
|
||
};
|
||
|
||
fragment9 {
|
||
target = <&zynqmp_dpdma>;
|
||
__overlay__ {
|
||
status = "okay";
|
||
};
|
||
};
|
||
|
||
fragment10 {
|
||
target = <&usb0>;
|
||
__overlay__ {
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&pinctrl_usb0_default>;
|
||
usbhub: usb5744 { /* u43 */
|
||
compatible = "microchip,usb5744";
|
||
reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>;
|
||
};
|
||
};
|
||
};
|
||
|
||
fragment11 {
|
||
target = <&dwc3_0>;
|
||
__overlay__ {
|
||
status = "okay";
|
||
dr_mode = "host";
|
||
snps,usb3_lpm_capable;
|
||
phy-names = "usb3-phy";
|
||
phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
|
||
maximum-speed = "super-speed";
|
||
};
|
||
};
|
||
|
||
fragment12 {
|
||
target = <&sdhci1>; /* on CC with tuned parameters */
|
||
__overlay__ {
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&pinctrl_sdhci1_default>;
|
||
/*
|
||
* SD 3.0 requires level shifter and this property
|
||
* should be removed if the board has level shifter and
|
||
* need to work in UHS mode
|
||
*/
|
||
no-1-8-v;
|
||
disable-wp;
|
||
xlnx,mio-bank = <1>;
|
||
};
|
||
};
|
||
|
||
fragment13 {
|
||
target = <&gem3>; /* required by spec */
|
||
__overlay__ {
|
||
#address-cells = <1>;
|
||
#size-cells = <0>;
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&pinctrl_gem3_default>;
|
||
phy-handle = <&phy0>;
|
||
phy-mode = "rgmii-id";
|
||
|
||
mdio: mdio {
|
||
#address-cells = <1>;
|
||
#size-cells = <0>;
|
||
reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
||
reset-delay-us = <2>;
|
||
|
||
phy0: ethernet-phy@1 {
|
||
#phy-cells = <1>;
|
||
reg = <1>;
|
||
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
|
||
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
|
||
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
|
||
ti,dp83867-rxctrl-strap-quirk;
|
||
};
|
||
};
|
||
};
|
||
};
|
||
|
||
fragment14 {
|
||
target = <&pinctrl0>; /* required by spec */
|
||
__overlay__ {
|
||
status = "okay";
|
||
|
||
pinctrl_uart1_default: uart1-default {
|
||
conf {
|
||
groups = "uart1_9_grp";
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
drive-strength = <12>;
|
||
};
|
||
|
||
conf-rx {
|
||
pins = "MIO37";
|
||
bias-high-impedance;
|
||
};
|
||
|
||
conf-tx {
|
||
pins = "MIO36";
|
||
bias-disable;
|
||
};
|
||
|
||
mux {
|
||
groups = "uart1_9_grp";
|
||
function = "uart1";
|
||
};
|
||
};
|
||
|
||
pinctrl_i2c1_default: i2c1-default {
|
||
conf {
|
||
groups = "i2c1_6_grp";
|
||
bias-pull-up;
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
};
|
||
|
||
mux {
|
||
groups = "i2c1_6_grp";
|
||
function = "i2c1";
|
||
};
|
||
};
|
||
|
||
pinctrl_i2c1_gpio: i2c1-gpio {
|
||
conf {
|
||
groups = "gpio0_24_grp", "gpio0_25_grp";
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
};
|
||
|
||
mux {
|
||
groups = "gpio0_24_grp", "gpio0_25_grp";
|
||
function = "gpio0";
|
||
};
|
||
};
|
||
|
||
pinctrl_gem3_default: gem3-default {
|
||
conf {
|
||
groups = "ethernet3_0_grp";
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
};
|
||
|
||
conf-rx {
|
||
pins = "MIO70", "MIO72", "MIO74";
|
||
bias-high-impedance;
|
||
low-power-disable;
|
||
};
|
||
|
||
conf-bootstrap {
|
||
pins = "MIO71", "MIO73", "MIO75";
|
||
bias-disable;
|
||
low-power-disable;
|
||
};
|
||
|
||
conf-tx {
|
||
pins = "MIO64", "MIO65", "MIO66",
|
||
"MIO67", "MIO68", "MIO69";
|
||
bias-disable;
|
||
low-power-enable;
|
||
};
|
||
|
||
conf-mdio {
|
||
groups = "mdio3_0_grp";
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
bias-disable;
|
||
};
|
||
|
||
mux-mdio {
|
||
function = "mdio3";
|
||
groups = "mdio3_0_grp";
|
||
};
|
||
|
||
mux {
|
||
function = "ethernet3";
|
||
groups = "ethernet3_0_grp";
|
||
};
|
||
};
|
||
|
||
pinctrl_usb0_default: usb0-default {
|
||
conf {
|
||
groups = "usb0_0_grp";
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
};
|
||
|
||
conf-rx {
|
||
pins = "MIO52", "MIO53", "MIO55";
|
||
bias-high-impedance;
|
||
};
|
||
|
||
conf-tx {
|
||
pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
|
||
"MIO60", "MIO61", "MIO62", "MIO63";
|
||
bias-disable;
|
||
};
|
||
|
||
mux {
|
||
groups = "usb0_0_grp";
|
||
function = "usb0";
|
||
};
|
||
};
|
||
|
||
pinctrl_sdhci1_default: sdhci1-default {
|
||
conf {
|
||
groups = "sdio1_0_grp";
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
bias-disable;
|
||
};
|
||
|
||
conf-cd {
|
||
groups = "sdio1_cd_0_grp";
|
||
bias-high-impedance;
|
||
bias-pull-up;
|
||
slew-rate = <SLEW_RATE_SLOW>;
|
||
power-source = <IO_STANDARD_LVCMOS18>;
|
||
};
|
||
|
||
mux-cd {
|
||
groups = "sdio1_cd_0_grp";
|
||
function = "sdio1_cd";
|
||
};
|
||
|
||
mux {
|
||
groups = "sdio1_0_grp";
|
||
function = "sdio1";
|
||
};
|
||
};
|
||
};
|
||
};
|
||
fragment15 {
|
||
target = <&uart1>;
|
||
__overlay__ {
|
||
status = "okay";
|
||
pinctrl-names = "default";
|
||
pinctrl-0 = <&pinctrl_uart1_default>;
|
||
};
|
||
};
|
||
};
|