u-boot/include/configs/mvebu_armada-37xx.h
Marek Behún a3b055fc70 arm: kirkwood, mvebu: Remove CONFIG_SYS_RESET_ADDRESS option
This option is not used anywhere.

Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-10-21 07:39:05 +02:00

94 lines
2.7 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2016 Stefan Roese <sr@denx.de>
*/
#ifndef _CONFIG_MVEBU_ARMADA_37XX_H
#define _CONFIG_MVEBU_ARMADA_37XX_H
#include <linux/sizes.h>
/*
* High Level Configuration Options (easy to change)
*/
/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
#define CONFIG_SYS_BAUDRATE_TABLE { 300, 600, 1200, 1800, 2400, 4800, \
9600, 19200, 38400, 57600, 115200, \
230400, 460800, 500000, 576000, \
921600, 1000000, 1152000, 1500000, \
2000000, 2500000, 3000000, 3500000, \
4000000, 4500000, 5000000, 5500000, \
6000000 }
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
/*
* Other required minimal configurations
*/
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
/*
* Environment
*/
#define DEFAULT_ENV_IS_RW /* required for configuring default fdtfile= */
/*
* Ethernet Driver configuration
*/
#define CONFIG_ARP_TIMEOUT 200
#define CONFIG_NET_RETRY_COUNT 50
#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
/*
* SATA/SCSI/AHCI configuration
*/
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
#define CONFIG_SYS_SCSI_MAX_LUN 1
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
CONFIG_SYS_SCSI_MAX_LUN)
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 0) \
func(USB, usb, 0) \
func(SCSI, scsi, 0) \
func(PXE, pxe, na) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
/* filler for default values filled by board_early_init_f() */
#define ENV_RW_FILLER \
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for ethaddr= */ \
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth1addr= */ \
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth2addr= */ \
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for eth3addr= */ \
"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0" /* for fdtfile= */ \
""
/* fdt_addr and kernel_addr are needed for existing distribution boot scripts */
#define CONFIG_EXTRA_ENV_SETTINGS \
"scriptaddr=0x6d00000\0" \
"pxefile_addr_r=0x6e00000\0" \
"fdt_addr=0x6f00000\0" \
"fdt_addr_r=0x6f00000\0" \
"kernel_addr=0x7000000\0" \
"kernel_addr_r=0x7000000\0" \
"ramdisk_addr_r=0xa000000\0" \
BOOTENV \
ENV_RW_FILLER
#endif /* _CONFIG_MVEBU_ARMADA_37XX_H */