Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-29 08:01:08 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/toradex/colibri-imx8x
History
Simon Glass e7dcf5645f env: Drop environment.h header file where not needed 
This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2019-08-11 16:43:41 -04:00
..
colibri-imx8qxp-imximage.cfg board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
colibri-imx8x.c env: Drop environment.h header file where not needed 2019-08-11 16:43:41 -04:00
Kconfig board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
MAINTAINERS board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
Makefile board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00
README board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support 2019-06-11 10:42:48 +02:00

README 

U-Boot for the Toradex Colibri iMX8QXP V1.0B Module

Quick Start
===========

- Build the ARM trusted firmware binary
- Get scfw_tcm.bin and ahab-container.img
- Build U-Boot
- Load U-Boot binary using uuu
- Flash U-Boot binary into the eMMC
- Boot

Get and Build the ARM Trusted Firmware
======================================

$ git clone -b imx_4.14.78_1.0.0_ga https://source.codeaurora.org/external/imx/imx-atf
$ cd imx-atf/
$ make PLAT=imx8qxp bl31

Get scfw_tcm.bin and ahab-container.img
=======================================

$ wget https://github.com/toradex/meta-fsl-bsp-release/blob/toradex-sumo-4.14.78-1.0.0_ga-bringup/imx/meta-bsp/recipes-bsp/imx-sc-firmware/files/mx8qx-colibri-scfw-tcm.bin?raw=true
$ mv mx8qx-colibri-scfw-tcm.bin\?raw\=true mx8qx-colibri-scfw-tcm.bin
$ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
$ chmod +x firmware-imx-8.0.bin
$ ./firmware-imx-8.0.bin

Copy the following binaries to the U-Boot folder:

$ cp imx-atf/build/imx8qxp/release/bl31.bin .
$ cp u-boot/u-boot.bin .

Copy the following firmware to the U-Boot folder:

$ cp firmware-imx-8.0/firmware/seco/ahab-container.img .

Build U-Boot
============

$ make colibri-imx8qxp_defconfig
$ make u-boot-dtb.imx

Load the U-Boot Binary Using UUU
================================

Get the latest version of the universal update utility (uuu) aka mfgtools 3.0:

https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fgithub.com%2FNXPmicro%2Fmfgtools%2Freleases

Put the module into USB recovery aka serial downloader mode, connect USB device
to your host and execute uuu:

sudo ./uuu u-boot/u-boot-dtb.imx

Flash the U-Boot Binary into the eMMC
=====================================

Burn the u-boot-dtb.imx binary to the primary eMMC hardware boot area partition:

load mmc 1:1 $loadaddr u-boot-dtb.imx
setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt ${blkcnt} / 0x200
mmc dev 0 1
mmc write ${loadaddr} 0x0 ${blkcnt}

Boot