mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
e498dac43e
If OP-TEE is compiled with an EDK2 application running in secure world it can process and store UEFI variables in an RPMB. Add documentation for the config options enabling this. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
488 lines
17 KiB
ReStructuredText
488 lines
17 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. Copyright (c) 2018 Heinrich Schuchardt
|
|
|
|
UEFI on U-Boot
|
|
==============
|
|
|
|
The Unified Extensible Firmware Interface Specification (UEFI) [1] has become
|
|
the default for booting on AArch64 and x86 systems. It provides a stable API for
|
|
the interaction of drivers and applications with the firmware. The API comprises
|
|
access to block storage, network, and console to name a few. The Linux kernel
|
|
and boot loaders like GRUB or the FreeBSD loader can be executed.
|
|
|
|
Development target
|
|
------------------
|
|
|
|
The implementation of UEFI in U-Boot strives to reach the requirements described
|
|
in the "Embedded Base Boot Requirements (EBBR) Specification - Release v1.0"
|
|
[2]. The "Server Base Boot Requirements System Software on ARM Platforms" [3]
|
|
describes a superset of the EBBR specification and may be used as further
|
|
reference.
|
|
|
|
A full blown UEFI implementation would contradict the U-Boot design principle
|
|
"keep it small".
|
|
|
|
Building U-Boot for UEFI
|
|
------------------------
|
|
|
|
The UEFI standard supports only little-endian systems. The UEFI support can be
|
|
activated for ARM and x86 by specifying::
|
|
|
|
CONFIG_CMD_BOOTEFI=y
|
|
CONFIG_EFI_LOADER=y
|
|
|
|
in the .config file.
|
|
|
|
Support for attaching virtual block devices, e.g. iSCSI drives connected by the
|
|
loaded UEFI application [4], requires::
|
|
|
|
CONFIG_BLK=y
|
|
CONFIG_PARTITIONS=y
|
|
|
|
Executing a UEFI binary
|
|
~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The bootefi command is used to start UEFI applications or to install UEFI
|
|
drivers. It takes two parameters::
|
|
|
|
bootefi <image address> [fdt address]
|
|
|
|
* image address - the memory address of the UEFI binary
|
|
* fdt address - the memory address of the flattened device tree
|
|
|
|
Below you find the output of an example session starting GRUB::
|
|
|
|
=> load mmc 0:2 ${fdt_addr_r} boot/dtb
|
|
29830 bytes read in 14 ms (2 MiB/s)
|
|
=> load mmc 0:1 ${kernel_addr_r} efi/debian/grubaa64.efi
|
|
reading efi/debian/grubaa64.efi
|
|
120832 bytes read in 7 ms (16.5 MiB/s)
|
|
=> bootefi ${kernel_addr_r} ${fdt_addr_r}
|
|
|
|
The environment variable 'bootargs' is passed as load options in the UEFI system
|
|
table. The Linux kernel EFI stub uses the load options as command line
|
|
arguments.
|
|
|
|
Launching a UEFI binary from a FIT image
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
A signed FIT image can be used to securely boot a UEFI image via the
|
|
bootm command. This feature is available if U-Boot is configured with::
|
|
|
|
CONFIG_BOOTM_EFI=y
|
|
|
|
A sample configuration is provided as file doc/uImage.FIT/uefi.its.
|
|
|
|
Below you find the output of an example session starting GRUB::
|
|
|
|
=> load mmc 0:1 ${kernel_addr_r} image.fit
|
|
4620426 bytes read in 83 ms (53.1 MiB/s)
|
|
=> bootm ${kernel_addr_r}#config-grub-nofdt
|
|
## Loading kernel from FIT Image at 40400000 ...
|
|
Using 'config-grub-nofdt' configuration
|
|
Verifying Hash Integrity ... sha256,rsa2048:dev+ OK
|
|
Trying 'efi-grub' kernel subimage
|
|
Description: GRUB EFI Firmware
|
|
Created: 2019-11-20 8:18:16 UTC
|
|
Type: Kernel Image (no loading done)
|
|
Compression: uncompressed
|
|
Data Start: 0x404000d0
|
|
Data Size: 450560 Bytes = 440 KiB
|
|
Hash algo: sha256
|
|
Hash value: 4dbee00021112df618f58b3f7cf5e1595533d543094064b9ce991e8b054a9eec
|
|
Verifying Hash Integrity ... sha256+ OK
|
|
XIP Kernel Image (no loading done)
|
|
## Transferring control to EFI (at address 404000d0) ...
|
|
Welcome to GRUB!
|
|
|
|
See doc/uImage.FIT/howto.txt for an introduction to FIT images.
|
|
|
|
Configuring UEFI secure boot
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The UEFI specification[1] defines a secure way of executing UEFI images
|
|
by verifying a signature (or message digest) of image with certificates.
|
|
This feature on U-Boot is enabled with::
|
|
|
|
CONFIG_UEFI_SECURE_BOOT=y
|
|
|
|
To make the boot sequence safe, you need to establish a chain of trust;
|
|
In UEFI secure boot the chain trust is defined by the following UEFI variables
|
|
|
|
* PK - Platform Key
|
|
* KEK - Key Exchange Keys
|
|
* db - white list database
|
|
* dbx - black list database
|
|
|
|
An in depth description of UEFI secure boot is beyond the scope of this
|
|
document. Please, refer to the UEFI specification and available online
|
|
documentation. Here is a simple example that you can follow for your initial
|
|
attempt (Please note that the actual steps will depend on your system and
|
|
environment.):
|
|
|
|
Install the required tools on your host
|
|
|
|
* openssl
|
|
* efitools
|
|
* sbsigntool
|
|
|
|
Create signing keys and the key database on your host:
|
|
|
|
The platform key
|
|
|
|
.. code-block:: bash
|
|
|
|
openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_PK/ \
|
|
-keyout PK.key -out PK.crt -nodes -days 365
|
|
cert-to-efi-sig-list -g 11111111-2222-3333-4444-123456789abc \
|
|
PK.crt PK.esl;
|
|
sign-efi-sig-list -c PK.crt -k PK.key PK PK.esl PK.auth
|
|
|
|
The key exchange keys
|
|
|
|
.. code-block:: bash
|
|
|
|
openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_KEK/ \
|
|
-keyout KEK.key -out KEK.crt -nodes -days 365
|
|
cert-to-efi-sig-list -g 11111111-2222-3333-4444-123456789abc \
|
|
KEK.crt KEK.esl
|
|
sign-efi-sig-list -c PK.crt -k PK.key KEK KEK.esl KEK.auth
|
|
|
|
The whitelist database
|
|
|
|
.. code-block:: bash
|
|
|
|
$ openssl req -x509 -sha256 -newkey rsa:2048 -subj /CN=TEST_db/ \
|
|
-keyout db.key -out db.crt -nodes -days 365
|
|
$ cert-to-efi-sig-list -g 11111111-2222-3333-4444-123456789abc \
|
|
db.crt db.esl
|
|
$ sign-efi-sig-list -c KEK.crt -k KEK.key db db.esl db.auth
|
|
|
|
Copy the \*.auth files to media, say mmc, that is accessible from U-Boot.
|
|
|
|
Sign an image with one of the keys in "db" on your host
|
|
|
|
.. code-block:: bash
|
|
|
|
sbsign --key db.key --cert db.crt helloworld.efi
|
|
|
|
Now in U-Boot install the keys on your board::
|
|
|
|
fatload mmc 0:1 <tmpaddr> PK.auth
|
|
setenv -e -nv -bs -rt -at -i <tmpaddr>,$filesize PK
|
|
fatload mmc 0:1 <tmpaddr> KEK.auth
|
|
setenv -e -nv -bs -rt -at -i <tmpaddr>,$filesize KEK
|
|
fatload mmc 0:1 <tmpaddr> db.auth
|
|
setenv -e -nv -bs -rt -at -i <tmpaddr>,$filesize db
|
|
|
|
Set up boot parameters on your board::
|
|
|
|
efidebug boot add 1 HELLO mmc 0:1 /helloworld.efi.signed ""
|
|
|
|
Now your board can run the signed image via the boot manager (see below).
|
|
You can also try this sequence by running Pytest, test_efi_secboot,
|
|
on the sandbox
|
|
|
|
.. code-block:: bash
|
|
|
|
cd <U-Boot source directory>
|
|
pytest.py test/py/tests/test_efi_secboot/test_signed.py --bd sandbox
|
|
|
|
Using OP-TEE for EFI variables
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
Instead of implementing UEFI variable services inside U-Boot they can
|
|
also be provided in the secure world by a module for OP-TEE[1]. The
|
|
interface between U-Boot and OP-TEE for variable services is enabled by
|
|
CONFIG_EFI_MM_COMM_TEE=y.
|
|
|
|
Tianocore EDK II's standalone management mode driver for variables can
|
|
be linked to OP-TEE for this purpose. This module uses the Replay
|
|
Protected Memory Block (RPMB) of an eMMC device for persisting
|
|
non-volatile variables. When calling the variable services via the
|
|
OP-TEE API U-Boot's OP-TEE supplicant relays calls to the RPMB driver
|
|
which has to be enabled via CONFIG_SUPPORT_EMMC_RPMB=y.
|
|
|
|
[1] https://optee.readthedocs.io/ - OP-TEE documentation
|
|
|
|
Executing the boot manager
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The UEFI specification foresees to define boot entries and boot sequence via UEFI
|
|
variables. Booting according to these variables is possible via::
|
|
|
|
bootefi bootmgr [fdt address]
|
|
|
|
As of U-Boot v2018.03 UEFI variables are not persisted and cannot be set at
|
|
runtime.
|
|
|
|
Executing the built in hello world application
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
A hello world UEFI application can be built with::
|
|
|
|
CONFIG_CMD_BOOTEFI_HELLO_COMPILE=y
|
|
|
|
It can be embedded into the U-Boot binary with::
|
|
|
|
CONFIG_CMD_BOOTEFI_HELLO=y
|
|
|
|
The bootefi command is used to start the embedded hello world application::
|
|
|
|
bootefi hello [fdt address]
|
|
|
|
Below you find the output of an example session::
|
|
|
|
=> bootefi hello ${fdtcontroladdr}
|
|
## Starting EFI application at 01000000 ...
|
|
WARNING: using memory device/image path, this may confuse some payloads!
|
|
Hello, world!
|
|
Running on UEFI 2.7
|
|
Have SMBIOS table
|
|
Have device tree
|
|
Load options: root=/dev/sdb3 init=/sbin/init rootwait ro
|
|
## Application terminated, r = 0
|
|
|
|
The environment variable fdtcontroladdr points to U-Boot's internal device tree
|
|
(if available).
|
|
|
|
Executing the built-in self-test
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
An UEFI self-test suite can be embedded in U-Boot by building with::
|
|
|
|
CONFIG_CMD_BOOTEFI_SELFTEST=y
|
|
|
|
For testing the UEFI implementation the bootefi command can be used to start the
|
|
self-test::
|
|
|
|
bootefi selftest [fdt address]
|
|
|
|
The environment variable 'efi_selftest' can be used to select a single test. If
|
|
it is not provided all tests are executed except those marked as 'on request'.
|
|
If the environment variable is set to 'list' a list of all tests is shown.
|
|
|
|
Below you can find the output of an example session::
|
|
|
|
=> setenv efi_selftest simple network protocol
|
|
=> bootefi selftest
|
|
Testing EFI API implementation
|
|
Selected test: 'simple network protocol'
|
|
Setting up 'simple network protocol'
|
|
Setting up 'simple network protocol' succeeded
|
|
Executing 'simple network protocol'
|
|
DHCP Discover
|
|
DHCP reply received from 192.168.76.2 (52:55:c0:a8:4c:02)
|
|
as broadcast message.
|
|
Executing 'simple network protocol' succeeded
|
|
Tearing down 'simple network protocol'
|
|
Tearing down 'simple network protocol' succeeded
|
|
Boot services terminated
|
|
Summary: 0 failures
|
|
Preparing for reset. Press any key.
|
|
|
|
The UEFI life cycle
|
|
-------------------
|
|
|
|
After the U-Boot platform has been initialized the UEFI API provides two kinds
|
|
of services:
|
|
|
|
* boot services
|
|
* runtime services
|
|
|
|
The API can be extended by loading UEFI drivers which come in two variants:
|
|
|
|
* boot drivers
|
|
* runtime drivers
|
|
|
|
UEFI drivers are installed with U-Boot's bootefi command. With the same command
|
|
UEFI applications can be executed.
|
|
|
|
Loaded images of UEFI drivers stay in memory after returning to U-Boot while
|
|
loaded images of applications are removed from memory.
|
|
|
|
An UEFI application (e.g. an operating system) that wants to take full control
|
|
of the system calls ExitBootServices. After a UEFI application calls
|
|
ExitBootServices
|
|
|
|
* boot services are not available anymore
|
|
* timer events are stopped
|
|
* the memory used by U-Boot except for runtime services is released
|
|
* the memory used by boot time drivers is released
|
|
|
|
So this is a point of no return. Afterwards the UEFI application can only return
|
|
to U-Boot by rebooting.
|
|
|
|
The UEFI object model
|
|
---------------------
|
|
|
|
UEFI offers a flexible and expandable object model. The objects in the UEFI API
|
|
are devices, drivers, and loaded images. These objects are referenced by
|
|
handles.
|
|
|
|
The interfaces implemented by the objects are referred to as protocols. These
|
|
are identified by GUIDs. They can be installed and uninstalled by calling the
|
|
appropriate boot services.
|
|
|
|
Handles are created by the InstallProtocolInterface or the
|
|
InstallMultipleProtocolinterfaces service if NULL is passed as handle.
|
|
|
|
Handles are deleted when the last protocol has been removed with the
|
|
UninstallProtocolInterface or the UninstallMultipleProtocolInterfaces service.
|
|
|
|
Devices offer the EFI_DEVICE_PATH_PROTOCOL. A device path is the concatenation
|
|
of device nodes. By their device paths all devices of a system are arranged in a
|
|
tree.
|
|
|
|
Drivers offer the EFI_DRIVER_BINDING_PROTOCOL. This protocol is used to connect
|
|
a driver to devices (which are referenced as controllers in this context).
|
|
|
|
Loaded images offer the EFI_LOADED_IMAGE_PROTOCOL. This protocol provides meta
|
|
information about the image and a pointer to the unload callback function.
|
|
|
|
The UEFI events
|
|
---------------
|
|
|
|
In the UEFI terminology an event is a data object referencing a notification
|
|
function which is queued for calling when the event is signaled. The following
|
|
types of events exist:
|
|
|
|
* periodic and single shot timer events
|
|
* exit boot services events, triggered by calling the ExitBootServices() service
|
|
* virtual address change events
|
|
* memory map change events
|
|
* read to boot events
|
|
* reset system events
|
|
* system table events
|
|
* events that are only triggered programmatically
|
|
|
|
Events can be created with the CreateEvent service and deleted with CloseEvent
|
|
service.
|
|
|
|
Events can be assigned to an event group. If any of the events in a group is
|
|
signaled, all other events in the group are also set to the signaled state.
|
|
|
|
The UEFI driver model
|
|
---------------------
|
|
|
|
A driver is specific for a single protocol installed on a device. To install a
|
|
driver on a device the ConnectController service is called. In this context
|
|
controller refers to the device for which the driver is installed.
|
|
|
|
The relevant drivers are identified using the EFI_DRIVER_BINDING_PROTOCOL. This
|
|
protocol has has three functions:
|
|
|
|
* supported - determines if the driver is compatible with the device
|
|
* start - installs the driver by opening the relevant protocol with
|
|
attribute EFI_OPEN_PROTOCOL_BY_DRIVER
|
|
* stop - uninstalls the driver
|
|
|
|
The driver may create child controllers (child devices). E.g. a driver for block
|
|
IO devices will create the device handles for the partitions. The child
|
|
controllers will open the supported protocol with the attribute
|
|
EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER.
|
|
|
|
A driver can be detached from a device using the DisconnectController service.
|
|
|
|
U-Boot devices mapped as UEFI devices
|
|
-------------------------------------
|
|
|
|
Some of the U-Boot devices are mapped as UEFI devices
|
|
|
|
* block IO devices
|
|
* console
|
|
* graphical output
|
|
* network adapter
|
|
|
|
As of U-Boot 2018.03 the logic for doing this is hard coded.
|
|
|
|
The development target is to integrate the setup of these UEFI devices with the
|
|
U-Boot driver model [5]. So when a U-Boot device is discovered a handle should
|
|
be created and the device path protocol and the relevant IO protocol should be
|
|
installed. The UEFI driver then would be attached by calling ConnectController.
|
|
When a U-Boot device is removed DisconnectController should be called.
|
|
|
|
UEFI devices mapped as U-Boot devices
|
|
-------------------------------------
|
|
|
|
UEFI drivers binaries and applications may create new (virtual) devices, install
|
|
a protocol and call the ConnectController service. Now the matching UEFI driver
|
|
is determined by iterating over the implementations of the
|
|
EFI_DRIVER_BINDING_PROTOCOL.
|
|
|
|
It is the task of the UEFI driver to create a corresponding U-Boot device and to
|
|
proxy calls for this U-Boot device to the controller.
|
|
|
|
In U-Boot 2018.03 this has only been implemented for block IO devices.
|
|
|
|
UEFI uclass
|
|
~~~~~~~~~~~
|
|
|
|
An UEFI uclass driver (lib/efi_driver/efi_uclass.c) has been created that
|
|
takes care of initializing the UEFI drivers and providing the
|
|
EFI_DRIVER_BINDING_PROTOCOL implementation for the UEFI drivers.
|
|
|
|
A linker created list is used to keep track of the UEFI drivers. To create an
|
|
entry in the list the UEFI driver uses the U_BOOT_DRIVER macro specifying
|
|
UCLASS_EFI as the ID of its uclass, e.g::
|
|
|
|
/* Identify as UEFI driver */
|
|
U_BOOT_DRIVER(efi_block) = {
|
|
.name = "EFI block driver",
|
|
.id = UCLASS_EFI,
|
|
.ops = &driver_ops,
|
|
};
|
|
|
|
The available operations are defined via the structure struct efi_driver_ops::
|
|
|
|
struct efi_driver_ops {
|
|
const efi_guid_t *protocol;
|
|
const efi_guid_t *child_protocol;
|
|
int (*bind)(efi_handle_t handle, void *interface);
|
|
};
|
|
|
|
When the supported() function of the EFI_DRIVER_BINDING_PROTOCOL is called the
|
|
uclass checks if the protocol GUID matches the protocol GUID of the UEFI driver.
|
|
In the start() function the bind() function of the UEFI driver is called after
|
|
checking the GUID.
|
|
The stop() function of the EFI_DRIVER_BINDING_PROTOCOL disconnects the child
|
|
controllers created by the UEFI driver and the UEFI driver. (In U-Boot v2013.03
|
|
this is not yet completely implemented.)
|
|
|
|
UEFI block IO driver
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The UEFI block IO driver supports devices exposing the EFI_BLOCK_IO_PROTOCOL.
|
|
|
|
When connected it creates a new U-Boot block IO device with interface type
|
|
IF_TYPE_EFI, adds child controllers mapping the partitions, and installs the
|
|
EFI_SIMPLE_FILE_SYSTEM_PROTOCOL on these. This can be used together with the
|
|
software iPXE to boot from iSCSI network drives [4].
|
|
|
|
This driver is only available if U-Boot is configured with::
|
|
|
|
CONFIG_BLK=y
|
|
CONFIG_PARTITIONS=y
|
|
|
|
Miscellaneous
|
|
-------------
|
|
|
|
Load file 2 protocol
|
|
~~~~~~~~~~~~~~~~~~~~
|
|
|
|
The load file 2 protocol can be used by the Linux kernel to load the initial
|
|
RAM disk. U-Boot can be configured to provide an implementation with::
|
|
|
|
EFI_LOAD_FILE2_INITRD=y
|
|
EFI_INITRD_FILESPEC=interface dev:part path_to_initrd
|
|
|
|
Links
|
|
-----
|
|
|
|
* [1] http://uefi.org/specifications - UEFI specifications
|
|
* [2] https://github.com/ARM-software/ebbr/releases/download/v1.0/ebbr-v1.0.pdf -
|
|
Embedded Base Boot Requirements (EBBR) Specification - Release v1.0
|
|
* [3] https://developer.arm.com/docs/den0044/latest/server-base-boot-requirements-system-software-on-arm-platforms-version-11 -
|
|
Server Base Boot Requirements System Software on ARM Platforms - Version 1.1
|
|
* [4] :doc:`iscsi`
|
|
* [5] :doc:`../driver-model/index`
|