mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
0474050d46
the aspeed ddr sdram controller needs to know if the memory chip mounted on the board is dual x8 die or not. Or it may get the wrong size of the memory space. Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
439 lines
11 KiB
C
439 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2012-2020 ASPEED Technology Inc.
|
|
*
|
|
* Copyright 2016 Google, Inc
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <reset.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/scu_ast2500.h>
|
|
#include <asm/arch/sdram_ast2500.h>
|
|
#include <asm/arch/wdt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <dt-bindings/clock/aspeed-clock.h>
|
|
|
|
/* These configuration parameters are taken from Aspeed SDK */
|
|
#define DDR4_MR46_MODE 0x08000000
|
|
#define DDR4_MR5_MODE 0x400
|
|
#define DDR4_MR13_MODE 0x101
|
|
#define DDR4_MR02_MODE 0x410
|
|
#define DDR4_TRFC 0x45457188
|
|
|
|
#define PHY_CFG_SIZE 15
|
|
|
|
static const u32 ddr4_ac_timing[3] = {0x63604e37, 0xe97afa99, 0x00019000};
|
|
static const struct {
|
|
u32 index[PHY_CFG_SIZE];
|
|
u32 value[PHY_CFG_SIZE];
|
|
} ddr4_phy_config = {
|
|
.index = {0, 1, 3, 4, 5, 56, 57, 58, 59, 60, 61, 62, 36, 49, 50},
|
|
.value = {
|
|
0x42492aae, 0x09002000, 0x55e00b0b, 0x20000000, 0x24,
|
|
0x03002900, 0x0e0000a0, 0x000e001c, 0x35b8c106, 0x08080607,
|
|
0x9b000900, 0x0e400a00, 0x00100008, 0x3c183c3c, 0x00631e0e,
|
|
},
|
|
};
|
|
|
|
#define SDRAM_MAX_SIZE (1024 * 1024 * 1024)
|
|
#define SDRAM_MIN_SIZE (128 * 1024 * 1024)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Bandwidth configuration parameters for different SDRAM requests.
|
|
* These are hardcoded settings taken from Aspeed SDK.
|
|
*/
|
|
static const u32 ddr_max_grant_params[4] = {
|
|
0x88448844, 0x24422288, 0x22222222, 0x22222222
|
|
};
|
|
|
|
/*
|
|
* These registers are not documented by Aspeed at all.
|
|
* All writes and reads are taken pretty much as is from SDK.
|
|
*/
|
|
struct ast2500_ddr_phy {
|
|
u32 phy[117];
|
|
};
|
|
|
|
struct dram_info {
|
|
struct ram_info info;
|
|
struct clk ddr_clk;
|
|
struct ast2500_sdrammc_regs *regs;
|
|
struct ast2500_scu *scu;
|
|
struct ast2500_ddr_phy *phy;
|
|
ulong clock_rate;
|
|
};
|
|
|
|
static int ast2500_sdrammc_init_phy(struct ast2500_ddr_phy *phy)
|
|
{
|
|
writel(0, &phy->phy[2]);
|
|
writel(0, &phy->phy[6]);
|
|
writel(0, &phy->phy[8]);
|
|
writel(0, &phy->phy[10]);
|
|
writel(0, &phy->phy[12]);
|
|
writel(0, &phy->phy[42]);
|
|
writel(0, &phy->phy[44]);
|
|
|
|
writel(0x86000000, &phy->phy[16]);
|
|
writel(0x00008600, &phy->phy[17]);
|
|
writel(0x80000000, &phy->phy[18]);
|
|
writel(0x80808080, &phy->phy[19]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ast2500_ddr_phy_init_process(struct dram_info *info)
|
|
{
|
|
struct ast2500_sdrammc_regs *regs = info->regs;
|
|
|
|
writel(0, ®s->phy_ctrl[0]);
|
|
writel(0x4040, &info->phy->phy[51]);
|
|
|
|
writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, ®s->phy_ctrl[0]);
|
|
while ((readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT))
|
|
;
|
|
writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_AUTO_UPDATE,
|
|
®s->phy_ctrl[0]);
|
|
}
|
|
|
|
static void ast2500_sdrammc_set_vref(struct dram_info *info, u32 vref)
|
|
{
|
|
writel(0, &info->regs->phy_ctrl[0]);
|
|
writel((vref << 8) | 0x6, &info->phy->phy[48]);
|
|
ast2500_ddr_phy_init_process(info);
|
|
}
|
|
|
|
static int ast2500_ddr_cbr_test(struct dram_info *info)
|
|
{
|
|
struct ast2500_sdrammc_regs *regs = info->regs;
|
|
int i;
|
|
const u32 test_params = SDRAM_TEST_EN
|
|
| SDRAM_TEST_ERRSTOP
|
|
| SDRAM_TEST_TWO_MODES;
|
|
int ret = 0;
|
|
|
|
writel((1 << SDRAM_REFRESH_CYCLES_SHIFT) |
|
|
(0x5c << SDRAM_REFRESH_PERIOD_SHIFT), ®s->refresh_timing);
|
|
writel((0xfff << SDRAM_TEST_LEN_SHIFT), ®s->test_addr);
|
|
writel(0xff00ff00, ®s->test_init_val);
|
|
writel(SDRAM_TEST_EN | (SDRAM_TEST_MODE_RW << SDRAM_TEST_MODE_SHIFT) |
|
|
SDRAM_TEST_ERRSTOP, ®s->ecc_test_ctrl);
|
|
|
|
while (!(readl(®s->ecc_test_ctrl) & SDRAM_TEST_DONE))
|
|
;
|
|
|
|
if (readl(®s->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
|
|
ret = -EIO;
|
|
} else {
|
|
for (i = 0; i <= SDRAM_TEST_GEN_MODE_MASK; ++i) {
|
|
writel((i << SDRAM_TEST_GEN_MODE_SHIFT) | test_params,
|
|
®s->ecc_test_ctrl);
|
|
while (!(readl(®s->ecc_test_ctrl) & SDRAM_TEST_DONE))
|
|
;
|
|
if (readl(®s->ecc_test_ctrl) & SDRAM_TEST_FAIL) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
writel(0, ®s->refresh_timing);
|
|
writel(0, ®s->ecc_test_ctrl);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ast2500_sdrammc_ddr4_calibrate_vref(struct dram_info *info)
|
|
{
|
|
int i;
|
|
int vref_min = 0xff;
|
|
int vref_max = 0;
|
|
int range_size = 0;
|
|
|
|
for (i = 1; i < 0x40; ++i) {
|
|
int res;
|
|
|
|
ast2500_sdrammc_set_vref(info, i);
|
|
res = ast2500_ddr_cbr_test(info);
|
|
if (res < 0) {
|
|
if (range_size > 0)
|
|
break;
|
|
} else {
|
|
++range_size;
|
|
vref_min = min(vref_min, i);
|
|
vref_max = max(vref_max, i);
|
|
}
|
|
}
|
|
|
|
/* Pick average setting */
|
|
ast2500_sdrammc_set_vref(info, (vref_min + vref_max + 1) / 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static size_t ast2500_sdrammc_get_vga_mem_size(struct dram_info *info)
|
|
{
|
|
size_t vga_mem_size_base = 8 * 1024 * 1024;
|
|
u32 vga_hwconf = (readl(&info->scu->hwstrap) & SCU_HWSTRAP_VGAMEM_MASK)
|
|
>> SCU_HWSTRAP_VGAMEM_SHIFT;
|
|
|
|
return vga_mem_size_base << vga_hwconf;
|
|
}
|
|
|
|
/*
|
|
* Find out RAM size and save it in dram_info
|
|
*
|
|
* The procedure is taken from Aspeed SDK
|
|
*/
|
|
static void ast2500_sdrammc_calc_size(struct dram_info *info)
|
|
{
|
|
/* The controller supports 128/256/512/1024 MB ram */
|
|
size_t ram_size = SDRAM_MIN_SIZE;
|
|
const int write_test_offset = 0x100000;
|
|
u32 test_pattern = 0xdeadbeef;
|
|
u32 cap_param = SDRAM_CONF_CAP_1024M;
|
|
u32 refresh_timing_param = DDR4_TRFC;
|
|
const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset;
|
|
|
|
for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
|
|
ram_size >>= 1) {
|
|
writel(test_pattern, write_addr_base + (ram_size >> 1));
|
|
test_pattern = (test_pattern >> 4) | (test_pattern << 28);
|
|
}
|
|
|
|
/* One last write to overwrite all wrapped values */
|
|
writel(test_pattern, write_addr_base);
|
|
|
|
/* Reset the pattern and see which value was really written */
|
|
test_pattern = 0xdeadbeef;
|
|
for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE;
|
|
ram_size >>= 1) {
|
|
if (readl(write_addr_base + (ram_size >> 1)) == test_pattern)
|
|
break;
|
|
|
|
--cap_param;
|
|
refresh_timing_param >>= 8;
|
|
test_pattern = (test_pattern >> 4) | (test_pattern << 28);
|
|
}
|
|
|
|
clrsetbits_le32(&info->regs->ac_timing[1],
|
|
(SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT),
|
|
((refresh_timing_param & SDRAM_AC_TRFC_MASK)
|
|
<< SDRAM_AC_TRFC_SHIFT));
|
|
|
|
info->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
info->info.size = ram_size - ast2500_sdrammc_get_vga_mem_size(info);
|
|
clrsetbits_le32(&info->regs->config,
|
|
(SDRAM_CONF_CAP_MASK << SDRAM_CONF_CAP_SHIFT),
|
|
((cap_param & SDRAM_CONF_CAP_MASK)
|
|
<< SDRAM_CONF_CAP_SHIFT));
|
|
}
|
|
|
|
static int ast2500_sdrammc_init_ddr4(struct dram_info *info)
|
|
{
|
|
int i;
|
|
const u32 power_control = SDRAM_PCR_CKE_EN
|
|
| (1 << SDRAM_PCR_CKE_DELAY_SHIFT)
|
|
| (2 << SDRAM_PCR_TCKE_PW_SHIFT)
|
|
| SDRAM_PCR_RESETN_DIS
|
|
| SDRAM_PCR_RGAP_CTRL_EN | SDRAM_PCR_ODT_EN | SDRAM_PCR_ODT_EXT_EN;
|
|
const u32 conf = (SDRAM_CONF_CAP_1024M << SDRAM_CONF_CAP_SHIFT)
|
|
#ifdef CONFIG_ASPEED_DDR4_DUALX8
|
|
| SDRAM_CONF_DUALX8
|
|
#endif
|
|
| SDRAM_CONF_SCRAMBLE | SDRAM_CONF_SCRAMBLE_PAT2 | SDRAM_CONF_DDR4;
|
|
int ret;
|
|
|
|
writel(conf, &info->regs->config);
|
|
for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i)
|
|
writel(ddr4_ac_timing[i], &info->regs->ac_timing[i]);
|
|
|
|
writel(DDR4_MR46_MODE, &info->regs->mr46_mode_setting);
|
|
writel(DDR4_MR5_MODE, &info->regs->mr5_mode_setting);
|
|
writel(DDR4_MR02_MODE, &info->regs->mr02_mode_setting);
|
|
writel(DDR4_MR13_MODE, &info->regs->mr13_mode_setting);
|
|
|
|
for (i = 0; i < PHY_CFG_SIZE; ++i) {
|
|
writel(ddr4_phy_config.value[i],
|
|
&info->phy->phy[ddr4_phy_config.index[i]]);
|
|
}
|
|
|
|
writel(power_control, &info->regs->power_control);
|
|
|
|
ast2500_ddr_phy_init_process(info);
|
|
|
|
ret = ast2500_sdrammc_ddr4_calibrate_vref(info);
|
|
if (ret < 0) {
|
|
debug("Vref calibration failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
writel((1 << SDRAM_REFRESH_CYCLES_SHIFT)
|
|
| SDRAM_REFRESH_ZQCS_EN | (0x2f << SDRAM_REFRESH_PERIOD_SHIFT),
|
|
&info->regs->refresh_timing);
|
|
|
|
setbits_le32(&info->regs->power_control,
|
|
SDRAM_PCR_AUTOPWRDN_EN | SDRAM_PCR_ODT_AUTO_ON);
|
|
|
|
ast2500_sdrammc_calc_size(info);
|
|
|
|
setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_INIT_EN);
|
|
while (!(readl(&info->regs->config) & SDRAM_CONF_CACHE_INIT_DONE))
|
|
;
|
|
setbits_le32(&info->regs->config, SDRAM_CONF_CACHE_EN);
|
|
|
|
writel(SDRAM_MISC_DDR4_TREFRESH, &info->regs->misc_control);
|
|
|
|
/* Enable all requests except video & display */
|
|
writel(SDRAM_REQ_USB20_EHCI1
|
|
| SDRAM_REQ_USB20_EHCI2
|
|
| SDRAM_REQ_CPU
|
|
| SDRAM_REQ_AHB2
|
|
| SDRAM_REQ_AHB
|
|
| SDRAM_REQ_MAC0
|
|
| SDRAM_REQ_MAC1
|
|
| SDRAM_REQ_PCIE
|
|
| SDRAM_REQ_XDMA
|
|
| SDRAM_REQ_ENCRYPTION
|
|
| SDRAM_REQ_VIDEO_FLAG
|
|
| SDRAM_REQ_VIDEO_LOW_PRI_WRITE
|
|
| SDRAM_REQ_2D_RW
|
|
| SDRAM_REQ_MEMCHECK, &info->regs->req_limit_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ast2500_sdrammc_unlock(struct dram_info *info)
|
|
{
|
|
writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key);
|
|
while (!readl(&info->regs->protection_key))
|
|
;
|
|
}
|
|
|
|
static void ast2500_sdrammc_lock(struct dram_info *info)
|
|
{
|
|
writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key);
|
|
while (readl(&info->regs->protection_key))
|
|
;
|
|
}
|
|
|
|
static int ast2500_sdrammc_probe(struct udevice *dev)
|
|
{
|
|
struct reset_ctl reset_ctl;
|
|
struct dram_info *priv = (struct dram_info *)dev_get_priv(dev);
|
|
struct ast2500_sdrammc_regs *regs = priv->regs;
|
|
int i;
|
|
int ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
|
|
|
|
if (ret) {
|
|
debug("DDR:No CLK\n");
|
|
return ret;
|
|
}
|
|
|
|
priv->scu = ast_get_scu();
|
|
if (IS_ERR(priv->scu)) {
|
|
debug("%s(): can't get SCU\n", __func__);
|
|
return PTR_ERR(priv->scu);
|
|
}
|
|
|
|
clk_set_rate(&priv->ddr_clk, priv->clock_rate);
|
|
ret = reset_get_by_index(dev, 0, &reset_ctl);
|
|
if (ret) {
|
|
debug("%s(): Failed to get reset signal\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_assert(&reset_ctl);
|
|
if (ret) {
|
|
debug("%s(): SDRAM reset failed: %u\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ast2500_sdrammc_unlock(priv);
|
|
|
|
writel(SDRAM_PCR_MREQI_DIS | SDRAM_PCR_RESETN_DIS,
|
|
®s->power_control);
|
|
writel(SDRAM_VIDEO_UNLOCK_KEY, ®s->gm_protection_key);
|
|
|
|
/* Mask all requests except CPU and AHB during PHY init */
|
|
writel(~(SDRAM_REQ_CPU | SDRAM_REQ_AHB), ®s->req_limit_mask);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i)
|
|
writel(ddr_max_grant_params[i], ®s->max_grant_len[i]);
|
|
|
|
setbits_le32(®s->intr_ctrl, SDRAM_ICR_RESET_ALL);
|
|
|
|
ast2500_sdrammc_init_phy(priv->phy);
|
|
if (readl(&priv->scu->hwstrap) & SCU_HWSTRAP_DDR4) {
|
|
ast2500_sdrammc_init_ddr4(priv);
|
|
} else {
|
|
debug("Unsupported DRAM3\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
clrbits_le32(®s->intr_ctrl, SDRAM_ICR_RESET_ALL);
|
|
ast2500_sdrammc_lock(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2500_sdrammc_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
struct regmap *map;
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->regs = regmap_get_range(map, 0);
|
|
priv->phy = regmap_get_range(map, 1);
|
|
|
|
priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev),
|
|
"clock-frequency", 0);
|
|
|
|
if (!priv->clock_rate) {
|
|
debug("DDR Clock Rate not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ast2500_sdrammc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops ast2500_sdrammc_ops = {
|
|
.get_info = ast2500_sdrammc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id ast2500_sdrammc_ids[] = {
|
|
{ .compatible = "aspeed,ast2500-sdrammc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(sdrammc_ast2500) = {
|
|
.name = "aspeed_ast2500_sdrammc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = ast2500_sdrammc_ids,
|
|
.ops = &ast2500_sdrammc_ops,
|
|
.ofdata_to_platdata = ast2500_sdrammc_ofdata_to_platdata,
|
|
.probe = ast2500_sdrammc_probe,
|
|
.priv_auto_alloc_size = sizeof(struct dram_info),
|
|
};
|