mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-08 22:24:32 +00:00
6eb32a03e0
Probe the FMan MACs based on the device tree while retaining the legacy code/functionality. One notable change introduced here is that, for DM_ETH, the name of the interfaces is corrected to the fmX-macY format, that avoids the referral to the MAC block names which were incorrect for FMan v3 devices (i.e. DTSEC, TGEC) and had weird formatting (i.e. FM1@DTSEC6, FM1@TGEC1). The legacy code is left unchanged in this respect. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
509 lines
9.5 KiB
C
509 lines
9.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <asm/arch/ppa.h>
|
|
#include <asm/arch/fdt.h>
|
|
#include <asm/arch/mmu.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
#include <asm/arch-fsl-layerscape/fsl_icid.h>
|
|
#include <ahci.h>
|
|
#include <hwconfig.h>
|
|
#include <mmc.h>
|
|
#include <scsi.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_csu.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <fsl_ifc.h>
|
|
#include <fsl_sec.h>
|
|
#include <spl.h>
|
|
|
|
#include "../common/vid.h"
|
|
#include "../common/qixis.h"
|
|
#include "ls1046aqds_qixis.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_TFABOOT
|
|
struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
|
|
{
|
|
"nor0",
|
|
CONFIG_SYS_NOR0_CSPR,
|
|
CONFIG_SYS_NOR0_CSPR_EXT,
|
|
CONFIG_SYS_NOR_AMASK,
|
|
CONFIG_SYS_NOR_CSOR,
|
|
{
|
|
CONFIG_SYS_NOR_FTIM0,
|
|
CONFIG_SYS_NOR_FTIM1,
|
|
CONFIG_SYS_NOR_FTIM2,
|
|
CONFIG_SYS_NOR_FTIM3
|
|
},
|
|
|
|
},
|
|
{
|
|
"nor1",
|
|
CONFIG_SYS_NOR1_CSPR,
|
|
CONFIG_SYS_NOR1_CSPR_EXT,
|
|
CONFIG_SYS_NOR_AMASK,
|
|
CONFIG_SYS_NOR_CSOR,
|
|
{
|
|
CONFIG_SYS_NOR_FTIM0,
|
|
CONFIG_SYS_NOR_FTIM1,
|
|
CONFIG_SYS_NOR_FTIM2,
|
|
CONFIG_SYS_NOR_FTIM3
|
|
},
|
|
},
|
|
{
|
|
"nand",
|
|
CONFIG_SYS_NAND_CSPR,
|
|
CONFIG_SYS_NAND_CSPR_EXT,
|
|
CONFIG_SYS_NAND_AMASK,
|
|
CONFIG_SYS_NAND_CSOR,
|
|
{
|
|
CONFIG_SYS_NAND_FTIM0,
|
|
CONFIG_SYS_NAND_FTIM1,
|
|
CONFIG_SYS_NAND_FTIM2,
|
|
CONFIG_SYS_NAND_FTIM3
|
|
},
|
|
},
|
|
{
|
|
"fpga",
|
|
CONFIG_SYS_FPGA_CSPR,
|
|
CONFIG_SYS_FPGA_CSPR_EXT,
|
|
CONFIG_SYS_FPGA_AMASK,
|
|
CONFIG_SYS_FPGA_CSOR,
|
|
{
|
|
CONFIG_SYS_FPGA_FTIM0,
|
|
CONFIG_SYS_FPGA_FTIM1,
|
|
CONFIG_SYS_FPGA_FTIM2,
|
|
CONFIG_SYS_FPGA_FTIM3
|
|
},
|
|
}
|
|
};
|
|
|
|
struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
|
|
{
|
|
"nand",
|
|
CONFIG_SYS_NAND_CSPR,
|
|
CONFIG_SYS_NAND_CSPR_EXT,
|
|
CONFIG_SYS_NAND_AMASK,
|
|
CONFIG_SYS_NAND_CSOR,
|
|
{
|
|
CONFIG_SYS_NAND_FTIM0,
|
|
CONFIG_SYS_NAND_FTIM1,
|
|
CONFIG_SYS_NAND_FTIM2,
|
|
CONFIG_SYS_NAND_FTIM3
|
|
},
|
|
},
|
|
{
|
|
"nor0",
|
|
CONFIG_SYS_NOR0_CSPR,
|
|
CONFIG_SYS_NOR0_CSPR_EXT,
|
|
CONFIG_SYS_NOR_AMASK,
|
|
CONFIG_SYS_NOR_CSOR,
|
|
{
|
|
CONFIG_SYS_NOR_FTIM0,
|
|
CONFIG_SYS_NOR_FTIM1,
|
|
CONFIG_SYS_NOR_FTIM2,
|
|
CONFIG_SYS_NOR_FTIM3
|
|
},
|
|
},
|
|
{
|
|
"nor1",
|
|
CONFIG_SYS_NOR1_CSPR,
|
|
CONFIG_SYS_NOR1_CSPR_EXT,
|
|
CONFIG_SYS_NOR_AMASK,
|
|
CONFIG_SYS_NOR_CSOR,
|
|
{
|
|
CONFIG_SYS_NOR_FTIM0,
|
|
CONFIG_SYS_NOR_FTIM1,
|
|
CONFIG_SYS_NOR_FTIM2,
|
|
CONFIG_SYS_NOR_FTIM3
|
|
},
|
|
},
|
|
{
|
|
"fpga",
|
|
CONFIG_SYS_FPGA_CSPR,
|
|
CONFIG_SYS_FPGA_CSPR_EXT,
|
|
CONFIG_SYS_FPGA_AMASK,
|
|
CONFIG_SYS_FPGA_CSOR,
|
|
{
|
|
CONFIG_SYS_FPGA_FTIM0,
|
|
CONFIG_SYS_FPGA_FTIM1,
|
|
CONFIG_SYS_FPGA_FTIM2,
|
|
CONFIG_SYS_FPGA_FTIM3
|
|
},
|
|
}
|
|
};
|
|
|
|
void ifc_cfg_boot_info(struct ifc_regs_info *regs_info)
|
|
{
|
|
enum boot_src src = get_boot_src();
|
|
|
|
if (src == BOOT_SOURCE_IFC_NAND)
|
|
regs_info->regs = ifc_cfg_nand_boot;
|
|
else
|
|
regs_info->regs = ifc_cfg_nor_boot;
|
|
regs_info->cs_size = CONFIG_SYS_FSL_IFC_BANK_COUNT;
|
|
}
|
|
|
|
#endif
|
|
|
|
enum {
|
|
MUX_TYPE_GPIO,
|
|
};
|
|
|
|
int checkboard(void)
|
|
{
|
|
#ifdef CONFIG_TFABOOT
|
|
enum boot_src src = get_boot_src();
|
|
#endif
|
|
char buf[64];
|
|
#ifndef CONFIG_SD_BOOT
|
|
u8 sw;
|
|
#endif
|
|
|
|
puts("Board: LS1046AQDS, boot from ");
|
|
|
|
#ifdef CONFIG_TFABOOT
|
|
if (src == BOOT_SOURCE_SD_MMC)
|
|
puts("SD\n");
|
|
else {
|
|
#endif
|
|
|
|
#ifdef CONFIG_SD_BOOT
|
|
puts("SD\n");
|
|
#else
|
|
sw = QIXIS_READ(brdcfg[0]);
|
|
sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
if (sw < 0x8)
|
|
printf("vBank: %d\n", sw);
|
|
else if (sw == 0x8)
|
|
puts("PromJet\n");
|
|
else if (sw == 0x9)
|
|
puts("NAND\n");
|
|
else if (sw == 0xF)
|
|
printf("QSPI\n");
|
|
else
|
|
printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
|
|
#endif
|
|
|
|
#ifdef CONFIG_TFABOOT
|
|
}
|
|
#endif
|
|
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x\n",
|
|
QIXIS_READ(id), QIXIS_READ(arch));
|
|
|
|
printf("FPGA: v%d (%s), build %d\n",
|
|
(int)QIXIS_READ(scver), qixis_read_tag(buf),
|
|
(int)qixis_read_minor());
|
|
|
|
return 0;
|
|
}
|
|
|
|
bool if_board_diff_clk(void)
|
|
{
|
|
u8 diff_conf = QIXIS_READ(brdcfg[11]);
|
|
|
|
return diff_conf & 0x40;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
switch (sysclk_conf & 0x0f) {
|
|
case QIXIS_SYSCLK_64:
|
|
return 64000000;
|
|
case QIXIS_SYSCLK_83:
|
|
return 83333333;
|
|
case QIXIS_SYSCLK_100:
|
|
return 100000000;
|
|
case QIXIS_SYSCLK_125:
|
|
return 125000000;
|
|
case QIXIS_SYSCLK_133:
|
|
return 133333333;
|
|
case QIXIS_SYSCLK_150:
|
|
return 150000000;
|
|
case QIXIS_SYSCLK_160:
|
|
return 160000000;
|
|
case QIXIS_SYSCLK_166:
|
|
return 166666666;
|
|
}
|
|
|
|
return 66666666;
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
|
|
|
|
if (if_board_diff_clk())
|
|
return get_board_sys_clk();
|
|
switch ((ddrclk_conf & 0x30) >> 4) {
|
|
case QIXIS_DDRCLK_100:
|
|
return 100000000;
|
|
case QIXIS_DDRCLK_125:
|
|
return 125000000;
|
|
case QIXIS_DDRCLK_133:
|
|
return 133333333;
|
|
}
|
|
|
|
return 66666666;
|
|
}
|
|
|
|
#ifdef CONFIG_LPUART
|
|
u32 get_lpuart_clk(void)
|
|
{
|
|
return gd->bus_clk;
|
|
}
|
|
#endif
|
|
|
|
int select_i2c_ch_pca9547(u8 ch, int bus_num)
|
|
{
|
|
int ret;
|
|
#ifdef CONFIG_DM_I2C
|
|
struct udevice *dev;
|
|
|
|
ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
|
|
1, &dev);
|
|
if (ret) {
|
|
printf("%s: Cannot find udev for a bus %d\n", __func__,
|
|
bus_num);
|
|
return ret;
|
|
}
|
|
ret = dm_i2c_write(dev, 0, &ch, 1);
|
|
#else
|
|
ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
|
|
#endif
|
|
if (ret) {
|
|
puts("PCA: failed to select proper channel\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
/*
|
|
* When resuming from deep sleep, the I2C channel may not be
|
|
* in the default channel. So, switch to the default channel
|
|
* before accessing DDR SPD.
|
|
*
|
|
* PCA9547 mount on I2C1 bus
|
|
*/
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
|
|
fsl_initdram();
|
|
#if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
|
|
defined(CONFIG_SPL_BUILD)
|
|
/* This will break-before-make MMU for DDR */
|
|
update_early_mmu_table();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_multiplexer_select_vid_channel(u8 channel)
|
|
{
|
|
return select_i2c_ch_pca9547(channel, 0);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_HAS_FSL_XHCI_USB
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
u32 usb_pwrfault;
|
|
#endif
|
|
#ifdef CONFIG_LPUART
|
|
u8 uart;
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_I2C
|
|
#ifdef CONFIG_SYS_I2C_EARLY_INIT
|
|
i2c_early_init_f();
|
|
#endif
|
|
#endif
|
|
fsl_lsch2_early_init_f();
|
|
|
|
#ifdef CONFIG_HAS_FSL_XHCI_USB
|
|
out_be32(&scfg->rcwpmuxcr0, 0x3333);
|
|
out_be32(&scfg->usbdrvvbus_selcr, SCFG_USBDRVVBUS_SELCR_USB1);
|
|
usb_pwrfault = (SCFG_USBPWRFAULT_DEDICATED <<
|
|
SCFG_USBPWRFAULT_USB3_SHIFT) |
|
|
(SCFG_USBPWRFAULT_DEDICATED <<
|
|
SCFG_USBPWRFAULT_USB2_SHIFT) |
|
|
(SCFG_USBPWRFAULT_SHARED <<
|
|
SCFG_USBPWRFAULT_USB1_SHIFT);
|
|
out_be32(&scfg->usbpwrfault_selcr, usb_pwrfault);
|
|
#endif
|
|
|
|
#ifdef CONFIG_LPUART
|
|
/* We use lpuart0 as system console */
|
|
uart = QIXIS_READ(brdcfg[14]);
|
|
uart &= ~CFG_UART_MUX_MASK;
|
|
uart |= CFG_LPUART_EN << CFG_UART_MUX_SHIFT;
|
|
QIXIS_WRITE(brdcfg[14], uart);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_DEEP_SLEEP
|
|
/* determine if it is a warm boot */
|
|
bool is_warm_boot(void)
|
|
{
|
|
#define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
|
|
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
|
|
|
|
if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int config_board_mux(int ctrl_type)
|
|
{
|
|
u8 reg14;
|
|
|
|
reg14 = QIXIS_READ(brdcfg[14]);
|
|
|
|
switch (ctrl_type) {
|
|
case MUX_TYPE_GPIO:
|
|
reg14 = (reg14 & (~0x6)) | 0x2;
|
|
break;
|
|
default:
|
|
puts("Unsupported mux interface type\n");
|
|
return -1;
|
|
}
|
|
|
|
QIXIS_WRITE(brdcfg[14], reg14);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int config_serdes_mux(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
int misc_init_r(void)
|
|
{
|
|
if (hwconfig("gpio"))
|
|
config_board_mux(MUX_TYPE_GPIO);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
|
|
|
|
#ifdef CONFIG_SYS_FSL_SERDES
|
|
config_serdes_mux();
|
|
#endif
|
|
|
|
if (adjust_vdd(0))
|
|
printf("Warning: Adjusting core voltage failed.\n");
|
|
|
|
#ifdef CONFIG_FSL_LS_PPA
|
|
ppa_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_NXP_ESBC
|
|
/*
|
|
* In case of Secure Boot, the IBR configures the SMMU
|
|
* to allow only Secure transactions.
|
|
* SMMU must be reset in bypass mode.
|
|
* Set the ClientPD bit and Clear the USFCFG Bit
|
|
*/
|
|
u32 val;
|
|
val = (in_le32(SMMU_SCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
|
|
out_le32(SMMU_SCR0, val);
|
|
val = (in_le32(SMMU_NSCR0) | SCR0_CLIENTPD_MASK) & ~(SCR0_USFCFG_MASK);
|
|
out_le32(SMMU_NSCR0, val);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_CAAM
|
|
sec_init();
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
u64 base[CONFIG_NR_DRAM_BANKS];
|
|
u64 size[CONFIG_NR_DRAM_BANKS];
|
|
u8 reg;
|
|
|
|
/* fixup DT for the two DDR banks */
|
|
base[0] = gd->bd->bi_dram[0].start;
|
|
size[0] = gd->bd->bi_dram[0].size;
|
|
base[1] = gd->bd->bi_dram[1].start;
|
|
size[1] = gd->bd->bi_dram[1].size;
|
|
|
|
fdt_fixup_memory_banks(blob, base, size, 2);
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
#ifdef CONFIG_SYS_DPAA_FMAN
|
|
#ifndef CONFIG_DM_ETH
|
|
fdt_fixup_fman_ethernet(blob);
|
|
#endif
|
|
fdt_fixup_board_enet(blob);
|
|
#endif
|
|
|
|
fdt_fixup_icid(blob);
|
|
|
|
reg = QIXIS_READ(brdcfg[0]);
|
|
reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
|
|
|
|
/* Disable IFC if QSPI is enabled */
|
|
if (reg == 0xF)
|
|
do_fixup_by_compat(blob, "fsl,ifc",
|
|
"status", "disabled", 8 + 1, 1);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
u8 flash_read8(void *addr)
|
|
{
|
|
return __raw_readb(addr + 1);
|
|
}
|
|
|
|
void flash_write16(u16 val, void *addr)
|
|
{
|
|
u16 shftval = (((val >> 8) & 0xff) | ((val << 8) & 0xff00));
|
|
|
|
__raw_writew(shftval, addr);
|
|
}
|
|
|
|
u16 flash_read16(void *addr)
|
|
{
|
|
u16 val = __raw_readw(addr);
|
|
|
|
return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
|
|
}
|
|
|
|
#if defined(CONFIG_TFABOOT) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
|
|
void *env_sf_get_env_addr(void)
|
|
{
|
|
return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
|
|
}
|
|
#endif
|