u-boot/arch/blackfin/cpu/traps.c
Kyle Moffett eed1a7b1cf Blackfin: replace "bfin_reset_or_hang()" with "panic()"
The bfin_reset_or_hang function unnecessarily duplicates the panic()
logic based on CONFIG_PANIC_HANG.

This patch deletes 20 lines of code and just calls panic() instead.
This also makes the following generic-restart conversion patch simpler.

Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-08 00:44:27 -04:00

430 lines
12 KiB
C

/*
* U-boot - traps.c Routines related to interrupts and exceptions
*
* Copyright (c) 2005-2008 Analog Devices Inc.
*
* This file is based on
* No original Copyright holder listed,
* Probabily original (C) Roman Zippel (assigned DJD, 1999)
*
* Copyright 2003 Metrowerks - for Blackfin
* Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca>
* Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org>
*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <kgdb.h>
#include <linux/types.h>
#include <asm/traps.h>
#include <asm/cplb.h>
#include <asm/io.h>
#include <asm/mach-common/bits/core.h>
#include <asm/mach-common/bits/mpu.h>
#include <asm/mach-common/bits/trace.h>
#include <asm/deferred.h>
#include "cpu.h"
#ifdef CONFIG_DEBUG_DUMP
# define ENABLE_DUMP 1
#else
# define ENABLE_DUMP 0
#endif
#define trace_buffer_save(x) \
do { \
if (!ENABLE_DUMP) \
break; \
(x) = bfin_read_TBUFCTL(); \
bfin_write_TBUFCTL((x) & ~TBUFEN); \
} while (0)
#define trace_buffer_restore(x) \
do { \
if (!ENABLE_DUMP) \
break; \
bfin_write_TBUFCTL((x)); \
} while (0);
/* The purpose of this map is to provide a mapping of address<->cplb settings
* rather than an exact map of what is actually addressable on the part. This
* map covers all current Blackfin parts. If you try to access an address that
* is in this map but not actually on the part, you won't get an exception and
* reboot, you'll get an external hardware addressing error and reboot. Since
* only the ends matter (you did something wrong and the board reset), the means
* are largely irrelevant.
*/
struct memory_map {
uint32_t start, end;
uint32_t data_flags, inst_flags;
};
const struct memory_map const bfin_memory_map[] = {
{ /* external memory */
.start = 0x00000000,
.end = 0x20000000,
.data_flags = SDRAM_DGENERIC,
.inst_flags = SDRAM_IGENERIC,
},
{ /* async banks */
.start = 0x20000000,
.end = 0x30000000,
.data_flags = SDRAM_EBIU,
.inst_flags = SDRAM_INON_CHBL,
},
{ /* everything on chip */
.start = 0xE0000000,
.end = 0xFFFFFFFF,
.data_flags = L1_DMEMORY,
.inst_flags = L1_IMEMORY,
}
};
#ifdef CONFIG_EXCEPTION_DEFER
unsigned int deferred_regs[deferred_regs_last];
#endif
/*
* Handle all exceptions while running in EVT3 or EVT5
*/
int trap_c(struct pt_regs *regs, uint32_t level)
{
uint32_t ret = 0;
uint32_t trapnr = (regs->seqstat & EXCAUSE);
unsigned long tflags;
bool data = false;
/*
* Keep the trace buffer so that a miss here points people
* to the right place (their code). Crashes here rarely
* happen. If they do, only the Blackfin maintainer cares.
*/
trace_buffer_save(tflags);
switch (trapnr) {
/* 0x26 - Data CPLB Miss */
case VEC_CPLB_M:
if (ANOMALY_05000261) {
static uint32_t last_cplb_fault_retx;
/*
* Work around an anomaly: if we see a new DCPLB fault,
* return without doing anything. Then,
* if we get the same fault again, handle it.
*/
if (last_cplb_fault_retx != regs->retx) {
last_cplb_fault_retx = regs->retx;
break;
}
}
data = true;
/* fall through */
/* 0x27 - Instruction CPLB Miss */
case VEC_CPLB_I_M: {
volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA;
uint32_t new_cplb_addr = 0, new_cplb_data = 0;
static size_t last_evicted;
size_t i;
#ifdef CONFIG_EXCEPTION_DEFER
/* This should never happen */
if (level == 5)
bfin_panic(regs);
#endif
new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1);
for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) {
/* if the exception is inside this range, lets use it */
if (new_cplb_addr >= bfin_memory_map[i].start &&
new_cplb_addr < bfin_memory_map[i].end)
break;
}
if (i == ARRAY_SIZE(bfin_memory_map)) {
printf("%cCPLB exception outside of memory map at 0x%p\n",
(data ? 'D' : 'I'), (void *)new_cplb_addr);
bfin_panic(regs);
} else
debug("CPLB addr %p matches map 0x%p - 0x%p\n", new_cplb_addr, bfin_memory_map[i].start, bfin_memory_map[i].end);
new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags);
if (data) {
CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0;
CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0;
} else {
CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0;
CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0;
}
/* find the next unlocked entry and evict it */
i = last_evicted & 0xF;
debug("last evicted = %i\n", i);
CPLB_DATA = CPLB_DATA_BASE + i;
while (*CPLB_DATA & CPLB_LOCK) {
debug("skipping %i %p - %08X\n", i, CPLB_DATA, *CPLB_DATA);
i = (i + 1) & 0xF; /* wrap around */
CPLB_DATA = CPLB_DATA_BASE + i;
}
CPLB_ADDR = CPLB_ADDR_BASE + i;
debug("evicting entry %i: 0x%p 0x%08X\n", i, *CPLB_ADDR, *CPLB_DATA);
last_evicted = i + 1;
/* need to turn off cplbs whenever we muck with the cplb table */
#if ENDCPLB != ENICPLB
# error cplb enable bit violates my sanity
#endif
uint32_t mem_control = (data ? DMEM_CONTROL : IMEM_CONTROL);
bfin_write32(mem_control, bfin_read32(mem_control) & ~ENDCPLB);
*CPLB_ADDR = new_cplb_addr;
*CPLB_DATA = new_cplb_data;
bfin_write32(mem_control, bfin_read32(mem_control) | ENDCPLB);
SSYNC();
/* dump current table for debugging purposes */
CPLB_ADDR = CPLB_ADDR_BASE;
CPLB_DATA = CPLB_DATA_BASE;
for (i = 0; i < 16; ++i)
debug("%2i 0x%p 0x%08X\n", i, *CPLB_ADDR++, *CPLB_DATA++);
break;
}
#ifdef CONFIG_CMD_KGDB
/* Single step
* if we are in IRQ5, just ignore, otherwise defer, and handle it in kgdb
*/
case VEC_STEP:
if (level == 3) {
/* If we just returned from an interrupt, the single step
* event is for the RTI instruction.
*/
if (regs->retx == regs->pc)
break;
/* we just return if we are single stepping through IRQ5 */
if (regs->ipend & 0x20)
break;
/* Otherwise, turn single stepping off & fall through,
* which defers to IRQ5
*/
regs->syscfg &= ~1;
}
/* fall through */
#endif
default:
#ifdef CONFIG_CMD_KGDB
if (level == 3) {
/* We need to handle this at EVT5, so try again */
bfin_dump(regs);
ret = 1;
break;
}
if (debugger_exception_handler && (*debugger_exception_handler)(regs))
break;
#endif
bfin_panic(regs);
}
trace_buffer_restore(tflags);
return ret;
}
#ifndef CONFIG_KALLSYMS
const char *symbol_lookup(unsigned long addr, unsigned long *caddr)
{
*caddr = addr;
return "N/A";
}
#endif
static void decode_address(char *buf, unsigned long address)
{
unsigned long sym_addr;
void *paddr = (void *)address;
const char *sym = symbol_lookup(address, &sym_addr);
if (sym) {
sprintf(buf, "<0x%p> { %s + 0x%lx }", paddr, sym, address - sym_addr);
return;
}
if (!address)
sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr);
else if (address >= CONFIG_SYS_MONITOR_BASE &&
address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr);
else
sprintf(buf, "<0x%p> /* unknown address */", paddr);
}
static char *strhwerrcause(uint16_t hwerrcause)
{
switch (hwerrcause) {
case 0x02: return "system mmr error";
case 0x03: return "external memory addressing error";
case 0x12: return "performance monitor overflow";
case 0x18: return "raise 5 instruction";
default: return "undef";
}
}
static char *strexcause(uint16_t excause)
{
switch (excause) {
case 0x00 ... 0xf: return "custom exception";
case 0x10: return "single step";
case 0x11: return "trace buffer full";
case 0x21: return "undef inst";
case 0x22: return "illegal inst";
case 0x23: return "dcplb prot violation";
case 0x24: return "misaligned data";
case 0x25: return "unrecoverable event";
case 0x26: return "dcplb miss";
case 0x27: return "multiple dcplb hit";
case 0x28: return "emulation watchpoint";
case 0x2a: return "misaligned inst";
case 0x2b: return "icplb prot violation";
case 0x2c: return "icplb miss";
case 0x2d: return "multiple icplb hit";
case 0x2e: return "illegal use of supervisor resource";
default: return "undef";
}
}
void dump(struct pt_regs *fp)
{
char buf[150];
int i;
uint16_t hwerrcause, excause;
if (!ENABLE_DUMP)
return;
#ifndef CONFIG_CMD_KGDB
/* fp->ipend is normally garbage, so load it ourself */
fp->ipend = bfin_read_IPEND();
#endif
hwerrcause = (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P;
excause = (fp->seqstat & EXCAUSE) >> EXCAUSE_P;
printf("SEQUENCER STATUS:\n");
printf(" SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n",
fp->seqstat, fp->ipend, fp->syscfg);
printf(" HWERRCAUSE: 0x%x: %s\n", hwerrcause, strhwerrcause(hwerrcause));
printf(" EXCAUSE : 0x%x: %s\n", excause, strexcause(excause));
for (i = 6; i <= 15; ++i) {
if (fp->ipend & (1 << i)) {
decode_address(buf, bfin_read32(EVT0 + 4*i));
printf(" physical IVG%i asserted : %s\n", i, buf);
}
}
decode_address(buf, fp->rete);
printf(" RETE: %s\n", buf);
decode_address(buf, fp->retn);
printf(" RETN: %s\n", buf);
decode_address(buf, fp->retx);
printf(" RETX: %s\n", buf);
decode_address(buf, fp->rets);
printf(" RETS: %s\n", buf);
/* we lie and store RETI in "pc" */
decode_address(buf, fp->pc);
printf(" RETI: %s\n", buf);
if (fp->seqstat & EXCAUSE) {
decode_address(buf, bfin_read_DCPLB_FAULT_ADDR());
printf("DCPLB_FAULT_ADDR: %s\n", buf);
decode_address(buf, bfin_read_ICPLB_FAULT_ADDR());
printf("ICPLB_FAULT_ADDR: %s\n", buf);
}
printf("\nPROCESSOR STATE:\n");
printf(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n",
fp->r0, fp->r1, fp->r2, fp->r3);
printf(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n",
fp->r4, fp->r5, fp->r6, fp->r7);
printf(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n",
fp->p0, fp->p1, fp->p2, fp->p3);
printf(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n",
fp->p4, fp->p5, fp->fp, (unsigned long)fp);
printf(" LB0: %08lx LT0: %08lx LC0: %08lx\n",
fp->lb0, fp->lt0, fp->lc0);
printf(" LB1: %08lx LT1: %08lx LC1: %08lx\n",
fp->lb1, fp->lt1, fp->lc1);
printf(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n",
fp->b0, fp->l0, fp->m0, fp->i0);
printf(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n",
fp->b1, fp->l1, fp->m1, fp->i1);
printf(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n",
fp->b2, fp->l2, fp->m2, fp->i2);
printf(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n",
fp->b3, fp->l3, fp->m3, fp->i3);
printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n",
fp->a0w, fp->a0x, fp->a1w, fp->a1x);
printf("USP : %08lx ASTAT: %08lx\n",
fp->usp, fp->astat);
printf("\n");
}
static void _dump_bfin_trace_buffer(void)
{
char buf[150];
int i = 0;
if (!ENABLE_DUMP)
return;
printf("Hardware Trace:\n");
if (bfin_read_TBUFSTAT() & TBUFCNT) {
for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
decode_address(buf, bfin_read_TBUF());
printf("%4i Target : %s\n", i, buf);
decode_address(buf, bfin_read_TBUF());
printf(" Source : %s\n", buf);
}
}
}
void dump_bfin_trace_buffer(void)
{
unsigned long tflags;
trace_buffer_save(tflags);
_dump_bfin_trace_buffer();
trace_buffer_restore(tflags);
}
void bfin_dump(struct pt_regs *regs)
{
unsigned long tflags;
trace_buffer_save(tflags);
puts(
"\n"
"\n"
"\n"
"Ack! Something bad happened to the Blackfin!\n"
"\n"
);
dump(regs);
_dump_bfin_trace_buffer();
puts("\n");
trace_buffer_restore(tflags);
}
void bfin_panic(struct pt_regs *regs)
{
unsigned long tflags;
trace_buffer_save(tflags);
bfin_dump(regs);
panic("PANIC: Blackfin internal error");
}