mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
6af4e2782d
This patch removes unsued function usb_phy_reset, rather common function dwc3_phy_reset is used. Signed-off-by: Marek Vasut <marex@denx.de>
126 lines
3.3 KiB
C
126 lines
3.3 KiB
C
/*
|
|
* Copyright 2015 Xilinx, Inc.
|
|
*
|
|
* Zynq USB HOST xHCI Controller
|
|
*
|
|
* Author: Siva Durga Prasad Paladugu<sivadur@xilinx.com>
|
|
*
|
|
* This file was reused from Freescale USB xHCI
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <asm-generic/errno.h>
|
|
#include <asm/arch-zynqmp/hardware.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/usb/dwc3.h>
|
|
#include "xhci.h"
|
|
|
|
/* Declare global data pointer */
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Default to the ZYNQMP XHCI defines */
|
|
#define USB3_PWRCTL_CLK_CMD_MASK 0x3FE000
|
|
#define USB3_PWRCTL_CLK_FREQ_MASK 0xFFC
|
|
#define USB3_PHY_PARTIAL_RX_POWERON BIT(6)
|
|
#define USB3_PHY_RX_POWERON BIT(14)
|
|
#define USB3_PHY_TX_POWERON BIT(15)
|
|
#define USB3_PHY_TX_RX_POWERON (USB3_PHY_RX_POWERON | USB3_PHY_TX_POWERON)
|
|
#define USB3_PWRCTL_CLK_CMD_SHIFT 14
|
|
#define USB3_PWRCTL_CLK_FREQ_SHIFT 22
|
|
|
|
/* USBOTGSS_WRAPPER definitions */
|
|
#define USBOTGSS_WRAPRESET BIT(17)
|
|
#define USBOTGSS_DMADISABLE BIT(16)
|
|
#define USBOTGSS_STANDBYMODE_NO_STANDBY BIT(4)
|
|
#define USBOTGSS_STANDBYMODE_SMRT BIT(5)
|
|
#define USBOTGSS_STANDBYMODE_SMRT_WKUP (0x3 << 4)
|
|
#define USBOTGSS_IDLEMODE_NOIDLE BIT(2)
|
|
#define USBOTGSS_IDLEMODE_SMRT BIT(3)
|
|
#define USBOTGSS_IDLEMODE_SMRT_WKUP (0x3 << 2)
|
|
|
|
/* USBOTGSS_IRQENABLE_SET_0 bit */
|
|
#define USBOTGSS_COREIRQ_EN BIT(1)
|
|
|
|
/* USBOTGSS_IRQENABLE_SET_1 bits */
|
|
#define USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN BIT(1)
|
|
#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN BIT(3)
|
|
#define USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN BIT(4)
|
|
#define USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN BIT(5)
|
|
#define USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN BIT(8)
|
|
#define USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN BIT(11)
|
|
#define USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN BIT(12)
|
|
#define USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN BIT(13)
|
|
#define USBOTGSS_IRQ_SET_1_OEVT_EN BIT(16)
|
|
#define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN BIT(17)
|
|
|
|
struct zynqmp_xhci {
|
|
struct xhci_hccr *hcd;
|
|
struct dwc3 *dwc3_reg;
|
|
};
|
|
|
|
static struct zynqmp_xhci zynqmp_xhci;
|
|
|
|
unsigned long ctr_addr[] = CONFIG_ZYNQMP_XHCI_LIST;
|
|
|
|
static int zynqmp_xhci_core_init(struct zynqmp_xhci *zynqmp_xhci)
|
|
{
|
|
int ret = 0;
|
|
|
|
ret = dwc3_core_init(zynqmp_xhci->dwc3_reg);
|
|
if (ret) {
|
|
debug("%s:failed to initialize core\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
/* We are hard-coding DWC3 core to Host Mode */
|
|
dwc3_set_mode(zynqmp_xhci->dwc3_reg, DWC3_GCTL_PRTCAP_HOST);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int xhci_hcd_init(int index, struct xhci_hccr **hccr, struct xhci_hcor **hcor)
|
|
{
|
|
struct zynqmp_xhci *ctx = &zynqmp_xhci;
|
|
int ret = 0;
|
|
uint32_t hclen;
|
|
|
|
if (index < 0 || index >= ARRAY_SIZE(ctr_addr))
|
|
return -EINVAL;
|
|
|
|
ctx->hcd = (struct xhci_hccr *)ctr_addr[index];
|
|
ctx->dwc3_reg = (struct dwc3 *)((void *)ctx->hcd + DWC3_REG_OFFSET);
|
|
|
|
ret = board_usb_init(index, USB_INIT_HOST);
|
|
if (ret != 0) {
|
|
puts("Failed to initialize board for USB\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = zynqmp_xhci_core_init(ctx);
|
|
if (ret < 0) {
|
|
puts("Failed to initialize xhci\n");
|
|
return ret;
|
|
}
|
|
|
|
*hccr = (struct xhci_hccr *)ctx->hcd;
|
|
hclen = HC_LENGTH(xhci_readl(&(*hccr)->cr_capbase));
|
|
*hcor = (struct xhci_hcor *)((uintptr_t) *hccr + hclen);
|
|
|
|
debug("zynqmp-xhci: init hccr %p and hcor %p hc_length %d\n",
|
|
*hccr, *hcor, hclen);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void xhci_hcd_stop(int index)
|
|
{
|
|
/*
|
|
* Currently zynqmp socs do not support PHY shutdown from
|
|
* sw. But this support may be added in future socs.
|
|
*/
|
|
|
|
return;
|
|
}
|