u-boot/board/gateworks/venice/venice.c
Marek Vasut 599474120a arm64: imx8mp: Drop EQoS GPR[1] board workaround
The EQoS interface mode is now configured in common board_interface_eth_init()
and called by EQoS MAC driver when appropriate. Drop the board side duplicates
if the same functionality.

Signed-off-by: Marek Vasut <marex@denx.de>
2023-03-30 13:51:33 +02:00

178 lines
3.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 Gateworks Corporation
*/
#include <fdt_support.h>
#include <init.h>
#include <led.h>
#include <miiphy.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include "eeprom.h"
int board_phys_sdram_size(phys_size_t *size)
{
if (!size)
return -EINVAL;
*size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
return 0;
}
int board_fit_config_name_match(const char *name)
{
int i = 0;
const char *dtb;
static char init;
char buf[32];
do {
dtb = eeprom_get_dtb_name(i++, buf, sizeof(buf));
if (!strcmp(dtb, name)) {
if (!init++)
printf("DTB : %s\n", name);
return 0;
}
} while (dtb);
return -1;
}
static int __maybe_unused setup_fec(void)
{
struct iomuxc_gpr_base_regs *gpr =
(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
#ifndef CONFIG_IMX8MP
/* Use 125M anatop REF_CLK1 for ENET1, not from external */
clrsetbits_le32(&gpr->gpr[1], 0x2000, 0);
#else
/* Enable RGMII TX clk output */
setbits_le32(&gpr->gpr[1], BIT(22));
#endif
return 0;
}
#if (IS_ENABLED(CONFIG_NET))
int board_phy_config(struct phy_device *phydev)
{
unsigned short val;
switch (phydev->phy_id) {
case 0x2000a231: /* TI DP83867 GbE PHY */
puts("DP83867 ");
/* LED configuration */
val = 0;
val |= 0x5 << 4; /* LED1(Amber;Speed) : 1000BT link */
val |= 0xb << 8; /* LED2(Green;Link/Act): blink for TX/RX act */
phy_write(phydev, MDIO_DEVAD_NONE, 24, val);
break;
}
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
#endif // IS_ENABLED(CONFIG_NET)
int board_init(void)
{
venice_eeprom_init(1);
if (IS_ENABLED(CONFIG_FEC_MXC))
setup_fec();
return 0;
}
int board_late_init(void)
{
const char *str;
char env[32];
int ret, i;
u8 enetaddr[6];
char fdt[64];
/* Set board serial/model */
if (!env_get("serial#"))
env_set_ulong("serial#", eeprom_get_serial());
env_set("model", eeprom_get_model());
/* Set fdt_file vars */
i = 0;
do {
str = eeprom_get_dtb_name(i, fdt, sizeof(fdt));
if (str) {
sprintf(env, "fdt_file%d", i + 1);
strcat(fdt, ".dtb");
env_set(env, fdt);
}
i++;
} while (str);
/* Set mac addrs */
i = 0;
do {
if (i)
sprintf(env, "eth%daddr", i);
else
sprintf(env, "ethaddr");
str = env_get(env);
if (!str) {
ret = eeprom_getmac(i, enetaddr);
if (!ret)
eth_env_set_enetaddr(env, enetaddr);
}
i++;
} while (!ret);
return 0;
}
int board_mmc_get_env_dev(int devno)
{
return devno;
}
int ft_board_setup(void *fdt, struct bd_info *bd)
{
const char *base_model = eeprom_get_baseboard_model();
char pcbrev;
int off;
/* set board model dt prop */
fdt_setprop_string(fdt, 0, "board", eeprom_get_model());
if (!strncmp(base_model, "GW73", 4)) {
pcbrev = get_pcb_rev(base_model);
if (pcbrev > 'B') {
printf("adjusting dt for %s\n", base_model);
/*
* revC replaced PCIe 5-port switch with 4-port
* which changed ethernet1 PCIe GbE
* from: pcie@0,0/pcie@1,0/pcie@2,4/pcie@6.0
* to: pcie@0,0/pcie@1,0/pcie@2,3/pcie@5.0
*/
off = fdt_path_offset(fdt, "ethernet1");
if (off > 0) {
u32 reg[5];
fdt_set_name(fdt, off, "pcie@5,0");
off = fdt_parent_offset(fdt, off);
fdt_set_name(fdt, off, "pcie@2,3");
memset(reg, 0, sizeof(reg));
reg[0] = cpu_to_fdt32(PCI_DEVFN(3, 0));
fdt_setprop(fdt, off, "reg", reg, sizeof(reg));
}
}
}
return 0;
}