mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
2810da7c80
They are no longer needed, because we now have proper driver support for the sl28cpld management controller. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
179 lines
5.7 KiB
ReStructuredText
179 lines
5.7 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
Kontron SMARC-sAL28
|
|
===================
|
|
|
|
The Kontron SMARC-sAL28 board is a TSN-enabled dual-core ARM A72
|
|
processor module with an on-chip 6-port TSN switch and a 3D GPU.
|
|
|
|
|
|
Quickstart
|
|
----------
|
|
|
|
Compile U-Boot
|
|
^^^^^^^^^^^^^^
|
|
|
|
Configure and compile the binary::
|
|
|
|
$ make kontron_sl28_defconfig
|
|
$ CROSS_COMPILE=aarch64-linux-gnu make
|
|
|
|
Copy u-boot.rom to a TFTP server.
|
|
|
|
Install the bootloader on the board
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
To install the bootloader binary use the following command::
|
|
|
|
> tftp path/to/u-boot.rom
|
|
> sf probe 0
|
|
> sf update $fileaddr 0x210000 $filesize
|
|
|
|
The board is fully failsafe, you can't break anything. If builtin watchdog
|
|
is enabled, you'll automatically end up in the failsafe bootloader if
|
|
something goes wrong. If the watchdog is disabled, you have to manually
|
|
enter failsafe mode by asserting the ``FORCE_RECOV#`` line during board
|
|
reset.
|
|
|
|
Update image
|
|
------------
|
|
|
|
After the build finished, there will be an update image called
|
|
u-boot.update. This can either be used in the DFU mode (which isn't
|
|
supported yet) or encapsulated in an EFI UpdateCapsule.
|
|
|
|
To build the capsule use the following command
|
|
|
|
$ tools/mkeficapsule -f u-boot.update -i 1 UpdateUboot
|
|
|
|
Afterward you can copy this file to your ESP into the /EFI/UpdateCapsule/
|
|
folder. On the next EFI boot this will automatically update your
|
|
bootloader.
|
|
|
|
Builtin watchdog
|
|
----------------
|
|
|
|
The builtin watchdog will supervise the bootloader startup. If anything
|
|
goes wrong it will reset the board and boot into the failsafe bootloader.
|
|
|
|
Once the bootloader is started successfully, it will disable the watchdog
|
|
timer.
|
|
|
|
wdt command flags
|
|
^^^^^^^^^^^^^^^^^
|
|
|
|
The `wdt start` as well as the `wdt expire` command take a flags argument.
|
|
The supported bitmask is as follows.
|
|
|
|
| Bit | Description |
|
|
| --- | ----------------------------- |
|
|
| 0 | Enable failsafe mode |
|
|
| 1 | Lock the control register |
|
|
| 2 | Disable board reset |
|
|
| 3 | Enable WDT_TIME_OUT# line |
|
|
|
|
For example, you can use `wdt expire 1` to issue a reset and boot into the
|
|
failsafe bootloader.
|
|
|
|
Disable the builtin watchdog
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
If for some reason, this isn't a desired behavior, the watchdog can also
|
|
be configured to not be enabled on board reset. It's configuration is saved
|
|
in the non-volatile board configuration bits. To change these you can use
|
|
the `sl28 nvm` command.
|
|
|
|
For more information on the non-volatile board configuration bits, see the
|
|
following section.
|
|
|
|
Non-volatile Board Configuration Bits
|
|
-------------------------------------
|
|
|
|
The board has 16 configuration bits which are stored in the CPLD and are
|
|
non-volatile. These can be changed by the `sl28 nvm` command.
|
|
|
|
=== ===============================================================
|
|
Bit Description
|
|
=== ===============================================================
|
|
0 Power-on inhibit
|
|
1 Enable eMMC boot
|
|
2 Enable watchdog by default
|
|
3 Disable failsafe watchdog by default
|
|
4 Clock generator selection bit 0
|
|
5 Clock generator selection bit 1
|
|
6 Disable CPU SerDes clock #2 and PCIe-A clock output
|
|
7 Disable PCIe-B and PCIe-C clock output
|
|
8 Keep onboard PHYs in reset
|
|
9 Keep USB hub in reset
|
|
10 Keep eDP-to-LVDS converter in reset
|
|
11 Enable I2C stuck recovery on I2C PM and I2C GP busses
|
|
12 Enable automatic onboard PHY H/W reset
|
|
13 reserved
|
|
14 Used by the RCW to determine boot source
|
|
15 Used by the RCW to determine boot source
|
|
=== ===============================================================
|
|
|
|
Please note, that if the board is in failsafe mode, the bits will have the
|
|
factory defaults, ie. all bits are off.
|
|
|
|
Power-On Inhibit
|
|
^^^^^^^^^^^^^^^^
|
|
|
|
If this is set, the board doesn't automatically turn on when power is
|
|
applied. Instead, the user has to either toggle the ``PWR_BTN#`` line or
|
|
use any other wake-up source such as RTC alarm or Wake-on-LAN.
|
|
|
|
eMMC Boot
|
|
^^^^^^^^^
|
|
|
|
If this is set, the RCW will be fetched from the on-board eMMC at offset
|
|
1MiB. For further details, have a look at the `Reset Configuration Word
|
|
Documentation`_.
|
|
|
|
Watchdog
|
|
^^^^^^^^
|
|
|
|
By default, the CPLD watchdog is enabled in failsafe mode. Using bits 2 and
|
|
3, the user can change its mode or disable it altogether.
|
|
|
|
===== ===== ===============================
|
|
Bit 2 Bit 3 Description
|
|
===== ===== ===============================
|
|
0 0 Watchdog enabled, failsafe mode
|
|
0 1 Watchdog disabled
|
|
1 0 Watchdog enabled, failsafe mode
|
|
1 1 Watchdog enabled, normal mode
|
|
===== ===== ===============================
|
|
|
|
Clock Generator Select
|
|
^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
The board is prepared to supply different SerDes clock speeds. But for now,
|
|
only setting 0 is supported, otherwise the CPU will hang because the PLL
|
|
will not lock.
|
|
|
|
Clock Output Disable And Keep Devices In Reset
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
To safe power, the user might disable different devices and clock output of
|
|
the board. It is not supported to disable the "CPU SerDes clock #2" for
|
|
now, otherwise the CPU will hang because the PLL will not lock.
|
|
|
|
Automatic reset of the onboard PHYs
|
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
|
|
|
By default, there is no hardware reset of the onboard PHY. This is because
|
|
for Wake-on-LAN, some registers have to retain their values. If you don't
|
|
use the WOL feature and a soft reset of the PHY is not enough you can
|
|
enable the hardware reset. The onboard PHY hardware reset follows the
|
|
power-on reset.
|
|
|
|
|
|
Further documentation
|
|
---------------------
|
|
|
|
- `Vendor Documentation`_
|
|
- `Reset Configuration Word Documentation`_
|
|
|
|
.. _Reset Configuration Word Documentation: https://raw.githubusercontent.com/kontron/rcw-smarc-sal28/master/README.md
|
|
.. _Vendor Documentation: https://raw.githubusercontent.com/kontron/u-boot-smarc-sal28/master/board/kontron/sl28/README.md
|