mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
32b2ea9818
Some pins in rockchip are routed via Top GRF and PMU GRF instead of direct regmap. Add support to handle all these routing paths so that the SoC pinctrl drivers will use them accordingly. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Jagan Teki <jagan@edgeble.ai> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
290 lines
6.3 KiB
C
290 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <log.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include "pinctrl-rockchip.h"
|
|
|
|
static struct rockchip_mux_route_data rk3228_mux_route_data[] = {
|
|
{
|
|
/* pwm0-0 */
|
|
.bank_num = 0,
|
|
.pin = 26,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16),
|
|
}, {
|
|
/* pwm0-1 */
|
|
.bank_num = 3,
|
|
.pin = 21,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16) | BIT(0),
|
|
}, {
|
|
/* pwm1-0 */
|
|
.bank_num = 0,
|
|
.pin = 27,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 1),
|
|
}, {
|
|
/* pwm1-1 */
|
|
.bank_num = 0,
|
|
.pin = 30,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 1) | BIT(1),
|
|
}, {
|
|
/* pwm2-0 */
|
|
.bank_num = 0,
|
|
.pin = 28,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 2),
|
|
}, {
|
|
/* pwm2-1 */
|
|
.bank_num = 1,
|
|
.pin = 12,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 2) | BIT(2),
|
|
}, {
|
|
/* pwm3-0 */
|
|
.bank_num = 3,
|
|
.pin = 26,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 3),
|
|
}, {
|
|
/* pwm3-1 */
|
|
.bank_num = 1,
|
|
.pin = 11,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 3) | BIT(3),
|
|
}, {
|
|
/* sdio-0_d0 */
|
|
.bank_num = 1,
|
|
.pin = 1,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 4),
|
|
}, {
|
|
/* sdio-1_d0 */
|
|
.bank_num = 3,
|
|
.pin = 2,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 4) | BIT(4),
|
|
}, {
|
|
/* spi-0_rx */
|
|
.bank_num = 0,
|
|
.pin = 13,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 5),
|
|
}, {
|
|
/* spi-1_rx */
|
|
.bank_num = 2,
|
|
.pin = 0,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 5) | BIT(5),
|
|
}, {
|
|
/* emmc-0_cmd */
|
|
.bank_num = 1,
|
|
.pin = 22,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 7),
|
|
}, {
|
|
/* emmc-1_cmd */
|
|
.bank_num = 2,
|
|
.pin = 4,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 7) | BIT(7),
|
|
}, {
|
|
/* uart2-0_rx */
|
|
.bank_num = 1,
|
|
.pin = 19,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 8),
|
|
}, {
|
|
/* uart2-1_rx */
|
|
.bank_num = 1,
|
|
.pin = 10,
|
|
.func = 2,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 8) | BIT(8),
|
|
}, {
|
|
/* uart1-0_rx */
|
|
.bank_num = 1,
|
|
.pin = 10,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 11),
|
|
}, {
|
|
/* uart1-1_rx */
|
|
.bank_num = 3,
|
|
.pin = 13,
|
|
.func = 1,
|
|
.route_offset = 0x50,
|
|
.route_val = BIT(16 + 11) | BIT(11),
|
|
},
|
|
};
|
|
|
|
static int rk3228_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
int iomux_num = (pin / 8);
|
|
struct regmap *regmap;
|
|
int reg, ret, mask, mux_type;
|
|
u8 bit;
|
|
u32 data;
|
|
|
|
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
|
|
? priv->regmap_pmu : priv->regmap_base;
|
|
|
|
/* get basic quadrupel of mux registers and the correct reg inside */
|
|
mux_type = bank->iomux[iomux_num].type;
|
|
reg = bank->iomux[iomux_num].offset;
|
|
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
|
|
|
|
data = (mask << (bit + 16));
|
|
data |= (mux & mask) << bit;
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3228_PULL_OFFSET 0x100
|
|
|
|
static void rk3228_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3228_PULL_OFFSET;
|
|
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
|
|
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
|
|
}
|
|
|
|
static int rk3228_set_pull(struct rockchip_pin_bank *bank,
|
|
int pin_num, int pull)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u8 bit, type;
|
|
u32 data;
|
|
|
|
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
|
|
return -ENOTSUPP;
|
|
|
|
rk3228_calc_pull_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
type = bank->pull_type[pin_num / 8];
|
|
ret = rockchip_translate_pull_value(type, pull);
|
|
if (ret < 0) {
|
|
debug("unsupported pull setting %d\n", pull);
|
|
return ret;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define RK3228_DRV_GRF_OFFSET 0x200
|
|
|
|
static void rk3228_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
|
|
int pin_num, struct regmap **regmap,
|
|
int *reg, u8 *bit)
|
|
{
|
|
struct rockchip_pinctrl_priv *priv = bank->priv;
|
|
|
|
*regmap = priv->regmap_base;
|
|
*reg = RK3228_DRV_GRF_OFFSET;
|
|
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
|
|
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
|
|
|
|
*bit = (pin_num % ROCKCHIP_DRV_PINS_PER_REG);
|
|
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
|
|
}
|
|
|
|
static int rk3228_set_drive(struct rockchip_pin_bank *bank,
|
|
int pin_num, int strength)
|
|
{
|
|
struct regmap *regmap;
|
|
int reg, ret;
|
|
u32 data;
|
|
u8 bit;
|
|
int type = bank->drv[pin_num / 8].drv_type;
|
|
|
|
rk3228_calc_drv_reg_and_bit(bank, pin_num, ®map, ®, &bit);
|
|
ret = rockchip_translate_drive_value(type, strength);
|
|
if (ret < 0) {
|
|
debug("unsupported driver strength %d\n", strength);
|
|
return ret;
|
|
}
|
|
|
|
/* enable the write to the equivalent lower bits */
|
|
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
|
|
data |= (ret << bit);
|
|
ret = regmap_write(regmap, reg, data);
|
|
return ret;
|
|
}
|
|
|
|
static struct rockchip_pin_bank rk3228_pin_banks[] = {
|
|
PIN_BANK(0, 32, "gpio0"),
|
|
PIN_BANK(1, 32, "gpio1"),
|
|
PIN_BANK(2, 32, "gpio2"),
|
|
PIN_BANK(3, 32, "gpio3"),
|
|
};
|
|
|
|
static struct rockchip_pin_ctrl rk3228_pin_ctrl = {
|
|
.pin_banks = rk3228_pin_banks,
|
|
.nr_banks = ARRAY_SIZE(rk3228_pin_banks),
|
|
.grf_mux_offset = 0x0,
|
|
.iomux_routes = rk3228_mux_route_data,
|
|
.niomux_routes = ARRAY_SIZE(rk3228_mux_route_data),
|
|
.set_mux = rk3228_set_mux,
|
|
.set_pull = rk3228_set_pull,
|
|
.set_drive = rk3228_set_drive,
|
|
};
|
|
|
|
static const struct udevice_id rk3228_pinctrl_ids[] = {
|
|
{
|
|
.compatible = "rockchip,rk3228-pinctrl",
|
|
.data = (ulong)&rk3228_pin_ctrl
|
|
},
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(pinctrl_rk3228) = {
|
|
.name = "rockchip_rk3228_pinctrl",
|
|
.id = UCLASS_PINCTRL,
|
|
.of_match = rk3228_pinctrl_ids,
|
|
.priv_auto = sizeof(struct rockchip_pinctrl_priv),
|
|
.ops = &rockchip_pinctrl_ops,
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
.bind = dm_scan_fdt_dev,
|
|
#endif
|
|
.probe = rockchip_pinctrl_probe,
|
|
};
|