u-boot/arch/arm/mach-rockchip/rk3399/Kconfig
Klaus Goger a13110a99f rockchip: ARM64: split RK3399-Q7 board off the RK3399-EVB board
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3399.

It provides the following feature set:
 * up to 4GB DDR3
 * on-module SPI-NOR flash
 * on-module eMMC (with 8-bit interace)
 * SD card (on a baseboad) via edge connector
 * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY
 * HDMI/eDP/MIPI displays
 * 2x MIPI-CSI
 * USB
   - 1x USB 3.0 dual-role (direct connection)
   - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub)
 * on-module STM32 Cortex-M0 companion controller, implementing:
   - low-power RTC functionality (ISL1208 emulation)
   - fan controller (AMC6821 emulation)
   - USB<->CAN bridge controller

Note that we use a multi-payload FIT image for booting and have
Cortex-M0 payload in a separate subimage: we thus rely on the FIT
image loader to put it into the SRAM region that ATF expects it in.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Fixed build warning on puma-rk3399:
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-04-15 10:13:17 -06:00

42 lines
1.2 KiB
Text

if ROCKCHIP_RK3399
choice
prompt "RK3399 board select"
config TARGET_EVB_RK3399
bool "RK3399 evaluation board"
help
RK3399evb is a evaluation board for Rockchp rk3399,
with full function and phisical connectors support like type-C ports,
usb2.0 host ports, LVDS, JTAG, MAC, SDcard, HDMI, USB-2-serial...
config TARGET_PUMA_RK3399
bool "Theobroma Systems RK3399-Q7 (Puma)"
help
The RK3399-Q7 (Puma) is a system-on-module (designed and
marketed by Theobroma Systems) featuring the Rockchip RK3399
in a Qseven-compatible form-factor (running of a single 5V
supply and exposing its external interfaces on a MXM-230
connector).
Key features of the RK3399-Q7 include:
* on-module USB 3.0 hub (2x USB 3.0 host + 1x USB 2.0 host)
* USB 3.0 dual-role
* on-module Micrel KSZ9031 GbE PHY
* on-module eMMC (up to 256GB configurations available)
* on-module DDR3 (1GB, 2GB and 4GB configurations available)
* HDMI, eDP, MIPI-DSI, MIPI-DSI/CSI and MIPI-CSI
* SPI, I2C, I2S, UART, GPIO, ...
endchoice
config SYS_SOC
default "rockchip"
config SYS_MALLOC_F_LEN
default 0x0800
source "board/rockchip/evb_rk3399/Kconfig"
source "board/theobroma-systems/puma_rk3399/Kconfig"
endif