Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-26 21:13:48 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/ti/am43xx/board.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style 
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

957 lines
24 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* board.c
*
* Board functions for TI AM43XX based boards
*
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*/
#include <common.h>
#include <environment.h>
#include <i2c.h>
#include <linux/errno.h>
#include <spl.h>
#include <usb.h>
#include <asm/omap_sec_common.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mux.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/gpio.h>
#include <asm/emif.h>
#include <asm/omap_common.h>
#include "../common/board_detect.h"
#include "board.h"
#include <power/pmic.h>
#include <power/tps65218.h>
#include <power/tps62362.h>
#include <miiphy.h>
#include <cpsw.h>
#include <linux/usb/gadget.h>
#include <dwc3-uboot.h>
#include <dwc3-omap-uboot.h>
#include <ti-usb-phy-uboot.h>
DECLARE_GLOBAL_DATA_PTR;
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/*
* Read header information from EEPROM into global structure.
*/
#ifdef CONFIG_TI_I2C_BOARD_DETECT
void do_board_detect(void)
{
if (ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS,
CONFIG_EEPROM_CHIP_ADDRESS))
printf("ti_i2c_eeprom_init failed\n");
}
#endif
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
const struct dpll_params dpll_mpu[NUM_CRYSTAL_FREQ][NUM_OPPS] = {
{ /* 19.2 MHz */
{125, 3, 2, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{125, 3, 1, -1, -1, -1, -1}, /* OPP 100 */
{150, 3, 1, -1, -1, -1, -1}, /* OPP 120 */
{125, 2, 1, -1, -1, -1, -1}, /* OPP TB */
{625, 11, 1, -1, -1, -1, -1} /* OPP NT */
},
{ /* 24 MHz */
{300, 23, 1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{600, 23, 1, -1, -1, -1, -1}, /* OPP 100 */
{720, 23, 1, -1, -1, -1, -1}, /* OPP 120 */
{800, 23, 1, -1, -1, -1, -1}, /* OPP TB */
{1000, 23, 1, -1, -1, -1, -1} /* OPP NT */
},
{ /* 25 MHz */
{300, 24, 1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{600, 24, 1, -1, -1, -1, -1}, /* OPP 100 */
{720, 24, 1, -1, -1, -1, -1}, /* OPP 120 */
{800, 24, 1, -1, -1, -1, -1}, /* OPP TB */
{1000, 24, 1, -1, -1, -1, -1} /* OPP NT */
},
{ /* 26 MHz */
{300, 25, 1, -1, -1, -1, -1}, /* OPP 50 */
{-1, -1, -1, -1, -1, -1, -1}, /* OPP RESERVED */
{600, 25, 1, -1, -1, -1, -1}, /* OPP 100 */
{720, 25, 1, -1, -1, -1, -1}, /* OPP 120 */
{800, 25, 1, -1, -1, -1, -1}, /* OPP TB */
{1000, 25, 1, -1, -1, -1, -1} /* OPP NT */
},
};
const struct dpll_params dpll_core[NUM_CRYSTAL_FREQ] = {
{625, 11, -1, -1, 10, 8, 4}, /* 19.2 MHz */
{1000, 23, -1, -1, 10, 8, 4}, /* 24 MHz */
{1000, 24, -1, -1, 10, 8, 4}, /* 25 MHz */
{1000, 25, -1, -1, 10, 8, 4} /* 26 MHz */
};
const struct dpll_params dpll_per[NUM_CRYSTAL_FREQ] = {
{400, 7, 5, -1, -1, -1, -1}, /* 19.2 MHz */
{400, 9, 5, -1, -1, -1, -1}, /* 24 MHz */
{384, 9, 5, -1, -1, -1, -1}, /* 25 MHz */
{480, 12, 5, -1, -1, -1, -1} /* 26 MHz */
};
const struct dpll_params epos_evm_dpll_ddr[NUM_CRYSTAL_FREQ] = {
{665, 47, 1, -1, 4, -1, -1}, /*19.2*/
{133, 11, 1, -1, 4, -1, -1}, /* 24 MHz */
{266, 24, 1, -1, 4, -1, -1}, /* 25 MHz */
{133, 12, 1, -1, 4, -1, -1} /* 26 MHz */
};
const struct dpll_params gp_evm_dpll_ddr = {
50, 2, 1, -1, 2, -1, -1};
static const struct dpll_params idk_dpll_ddr = {
400, 23, 1, -1, 2, -1, -1
};
static const u32 ext_phy_ctrl_const_base_lpddr2[] = {
0x00500050,
0x00350035,
0x00350035,
0x00350035,
0x00350035,
0x00350035,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x40001000,
0x08102040
};
const struct ctrl_ioregs ioregs_lpddr2 = {
.cm0ioctl = LPDDR2_ADDRCTRL_IOCTRL_VALUE,
.cm1ioctl = LPDDR2_ADDRCTRL_WD0_IOCTRL_VALUE,
.cm2ioctl = LPDDR2_ADDRCTRL_WD1_IOCTRL_VALUE,
.dt0ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
.dt1ioctl = LPDDR2_DATA0_IOCTRL_VALUE,
.dt2ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
.dt3ioctrl = LPDDR2_DATA0_IOCTRL_VALUE,
.emif_sdram_config_ext = 0x1,
};
const struct emif_regs emif_regs_lpddr2 = {
.sdram_config = 0x808012BA,
.ref_ctrl = 0x0000040D,
.sdram_tim1 = 0xEA86B411,
.sdram_tim2 = 0x103A094A,
.sdram_tim3 = 0x0F6BA37F,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074BE4,
.temp_alert_config = 0x0,
.emif_rd_wr_lvl_rmp_win = 0x0,
.emif_rd_wr_lvl_rmp_ctl = 0x0,
.emif_rd_wr_lvl_ctl = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0E284006,
.emif_rd_wr_exec_thresh = 0x80000405,
.emif_ddr_ext_phy_ctrl_1 = 0x04010040,
.emif_ddr_ext_phy_ctrl_2 = 0x00500050,
.emif_ddr_ext_phy_ctrl_3 = 0x00500050,
.emif_ddr_ext_phy_ctrl_4 = 0x00500050,
.emif_ddr_ext_phy_ctrl_5 = 0x00500050,
.emif_prio_class_serv_map = 0x80000001,
.emif_connect_id_serv_1_map = 0x80000094,
.emif_connect_id_serv_2_map = 0x00000000,
.emif_cos_config = 0x000FFFFF
};
const struct ctrl_ioregs ioregs_ddr3 = {
.cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE,
.cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE,
.cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE,
.dt0ioctl = DDR3_DATA0_IOCTRL_VALUE,
.dt1ioctl = DDR3_DATA0_IOCTRL_VALUE,
.dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE,
.dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE,
.emif_sdram_config_ext = 0xc163,
};
const struct emif_regs ddr3_emif_regs_400Mhz = {
.sdram_config = 0x638413B2,
.ref_ctrl = 0x00000C30,
.sdram_tim1 = 0xEAAAD4DB,
.sdram_tim2 = 0x266B7FDA,
.sdram_tim3 = 0x107F8678,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074BE4,
.temp_alert_config = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0E004008,
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x00400040,
.emif_ddr_ext_phy_ctrl_3 = 0x00400040,
.emif_ddr_ext_phy_ctrl_4 = 0x00400040,
.emif_ddr_ext_phy_ctrl_5 = 0x00400040,
.emif_rd_wr_lvl_rmp_win = 0x0,
.emif_rd_wr_lvl_rmp_ctl = 0x0,
.emif_rd_wr_lvl_ctl = 0x0,
.emif_rd_wr_exec_thresh = 0x80000405,
.emif_prio_class_serv_map = 0x80000001,
.emif_connect_id_serv_1_map = 0x80000094,
.emif_connect_id_serv_2_map = 0x00000000,
.emif_cos_config = 0x000FFFFF
};
/* EMIF DDR3 Configurations are different for beta AM43X GP EVMs */
const struct emif_regs ddr3_emif_regs_400Mhz_beta = {
.sdram_config = 0x638413B2,
.ref_ctrl = 0x00000C30,
.sdram_tim1 = 0xEAAAD4DB,
.sdram_tim2 = 0x266B7FDA,
.sdram_tim3 = 0x107F8678,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074BE4,
.temp_alert_config = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0E004008,
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x00000065,
.emif_ddr_ext_phy_ctrl_3 = 0x00000091,
.emif_ddr_ext_phy_ctrl_4 = 0x000000B5,
.emif_ddr_ext_phy_ctrl_5 = 0x000000E5,
.emif_rd_wr_exec_thresh = 0x80000405,
.emif_prio_class_serv_map = 0x80000001,
.emif_connect_id_serv_1_map = 0x80000094,
.emif_connect_id_serv_2_map = 0x00000000,
.emif_cos_config = 0x000FFFFF
};
/* EMIF DDR3 Configurations are different for production AM43X GP EVMs */
const struct emif_regs ddr3_emif_regs_400Mhz_production = {
.sdram_config = 0x638413B2,
.ref_ctrl = 0x00000C30,
.sdram_tim1 = 0xEAAAD4DB,
.sdram_tim2 = 0x266B7FDA,
.sdram_tim3 = 0x107F8678,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074BE4,
.temp_alert_config = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0E004008,
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x00000066,
.emif_ddr_ext_phy_ctrl_3 = 0x00000091,
.emif_ddr_ext_phy_ctrl_4 = 0x000000B9,
.emif_ddr_ext_phy_ctrl_5 = 0x000000E6,
.emif_rd_wr_exec_thresh = 0x80000405,
.emif_prio_class_serv_map = 0x80000001,
.emif_connect_id_serv_1_map = 0x80000094,
.emif_connect_id_serv_2_map = 0x00000000,
.emif_cos_config = 0x000FFFFF
};
static const struct emif_regs ddr3_sk_emif_regs_400Mhz = {
.sdram_config = 0x638413b2,
.sdram_config2 = 0x00000000,
.ref_ctrl = 0x00000c30,
.sdram_tim1 = 0xeaaad4db,
.sdram_tim2 = 0x266b7fda,
.sdram_tim3 = 0x107f8678,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074be4,
.temp_alert_config = 0x0,
.emif_ddr_phy_ctlr_1 = 0x0e084008,
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x89,
.emif_ddr_ext_phy_ctrl_3 = 0x90,
.emif_ddr_ext_phy_ctrl_4 = 0x8e,
.emif_ddr_ext_phy_ctrl_5 = 0x8d,
.emif_rd_wr_lvl_rmp_win = 0x0,
.emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.emif_rd_wr_exec_thresh = 0x80000000,
.emif_prio_class_serv_map = 0x80000001,
.emif_connect_id_serv_1_map = 0x80000094,
.emif_connect_id_serv_2_map = 0x00000000,
.emif_cos_config = 0x000FFFFF
};
static const struct emif_regs ddr3_idk_emif_regs_400Mhz = {
.sdram_config = 0x61a11b32,
.sdram_config2 = 0x00000000,
.ref_ctrl = 0x00000c30,
.sdram_tim1 = 0xeaaad4db,
.sdram_tim2 = 0x266b7fda,
.sdram_tim3 = 0x107f8678,
.read_idle_ctrl = 0x00050000,
.zq_config = 0x50074be4,
.temp_alert_config = 0x00000000,
.emif_ddr_phy_ctlr_1 = 0x00008009,
.emif_ddr_ext_phy_ctrl_1 = 0x08020080,
.emif_ddr_ext_phy_ctrl_2 = 0x00000040,
.emif_ddr_ext_phy_ctrl_3 = 0x0000003e,
.emif_ddr_ext_phy_ctrl_4 = 0x00000051,
.emif_ddr_ext_phy_ctrl_5 = 0x00000051,
.emif_rd_wr_lvl_rmp_win = 0x00000000,
.emif_rd_wr_lvl_rmp_ctl = 0x00000000,
.emif_rd_wr_lvl_ctl = 0x00000000,
.emif_rd_wr_exec_thresh = 0x00000405,
.emif_prio_class_serv_map = 0x00000000,
.emif_connect_id_serv_1_map = 0x00000000,
.emif_connect_id_serv_2_map = 0x00000000,
.emif_cos_config = 0x00ffffff
};
void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size)
{
if (board_is_eposevm()) {
*regs = ext_phy_ctrl_const_base_lpddr2;
*size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2);
}
return;
}
const struct dpll_params *get_dpll_ddr_params(void)
{
int ind = get_sys_clk_index();
if (board_is_eposevm())
return &epos_evm_dpll_ddr[ind];
else if (board_is_evm() || board_is_sk())
return &gp_evm_dpll_ddr;
else if (board_is_idk())
return &idk_dpll_ddr;
printf(" Board '%s' not supported\n", board_ti_get_name());
return NULL;
}
/*
* get_opp_offset:
* Returns the index for safest OPP of the device to boot.
* max_off: Index of the MAX OPP in DEV ATTRIBUTE register.
* min_off: Index of the MIN OPP in DEV ATTRIBUTE register.
* This data is read from dev_attribute register which is e-fused.
* A'1' in bit indicates OPP disabled and not available, a '0' indicates
* OPP available. Lowest OPP starts with min_off. So returning the
* bit with rightmost '0'.
*/
static int get_opp_offset(int max_off, int min_off)
{
struct ctrl_stat *ctrl = (struct ctrl_stat *)CTRL_BASE;
int opp, offset, i;
/* Bits 0:11 are defined to be the MPU_MAX_FREQ */
opp = readl(&ctrl->dev_attr) & ~0xFFFFF000;
for (i = max_off; i >= min_off; i--) {
offset = opp & (1 << i);
if (!offset)
return i;
}
return min_off;
}
const struct dpll_params *get_dpll_mpu_params(void)
{
int opp = get_opp_offset(DEV_ATTR_MAX_OFFSET, DEV_ATTR_MIN_OFFSET);
u32 ind = get_sys_clk_index();
return &dpll_mpu[ind][opp];
}
const struct dpll_params *get_dpll_core_params(void)
{
int ind = get_sys_clk_index();
return &dpll_core[ind];
}
const struct dpll_params *get_dpll_per_params(void)
{
int ind = get_sys_clk_index();
return &dpll_per[ind];
}
void scale_vcores_generic(u32 m)
{
int mpu_vdd, ddr_volt;
if (i2c_probe(TPS65218_CHIP_PM))
return;
switch (m) {
case 1000:
mpu_vdd = TPS65218_DCDC_VOLT_SEL_1330MV;
break;
case 800:
mpu_vdd = TPS65218_DCDC_VOLT_SEL_1260MV;
break;
case 720:
mpu_vdd = TPS65218_DCDC_VOLT_SEL_1200MV;
break;
case 600:
mpu_vdd = TPS65218_DCDC_VOLT_SEL_1100MV;
break;
case 300:
mpu_vdd = TPS65218_DCDC_VOLT_SEL_0950MV;
break;
default:
puts("Unknown MPU clock, not scaling\n");
return;
}
/* Set DCDC1 (CORE) voltage to 1.1V */
if (tps65218_voltage_update(TPS65218_DCDC1,
TPS65218_DCDC_VOLT_SEL_1100MV)) {
printf("%s failure\n", __func__);
return;
}
/* Set DCDC2 (MPU) voltage */
if (tps65218_voltage_update(TPS65218_DCDC2, mpu_vdd)) {
printf("%s failure\n", __func__);
return;
}
if (board_is_eposevm())
ddr_volt = TPS65218_DCDC3_VOLT_SEL_1200MV;
else
ddr_volt = TPS65218_DCDC3_VOLT_SEL_1350MV;
/* Set DCDC3 (DDR) voltage */
if (tps65218_voltage_update(TPS65218_DCDC3, ddr_volt)) {
printf("%s failure\n", __func__);
return;
}
}
void scale_vcores_idk(u32 m)
{
int mpu_vdd;
if (i2c_probe(TPS62362_I2C_ADDR))
return;
switch (m) {
case 1000:
mpu_vdd = TPS62362_DCDC_VOLT_SEL_1330MV;
break;
case 800:
mpu_vdd = TPS62362_DCDC_VOLT_SEL_1260MV;
break;
case 720:
mpu_vdd = TPS62362_DCDC_VOLT_SEL_1200MV;
break;
case 600:
mpu_vdd = TPS62362_DCDC_VOLT_SEL_1100MV;
break;
case 300:
mpu_vdd = TPS62362_DCDC_VOLT_SEL_1330MV;
break;
default:
puts("Unknown MPU clock, not scaling\n");
return;
}
/* Set VDD_MPU voltage */
if (tps62362_voltage_update(TPS62362_SET3, mpu_vdd)) {
printf("%s failure\n", __func__);
return;
}
}
void gpi2c_init(void)
{
/* When needed to be invoked prior to BSS initialization */
static bool first_time = true;
if (first_time) {
enable_i2c0_pin_mux();
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
CONFIG_SYS_OMAP24_I2C_SLAVE);
first_time = false;
}
}
void scale_vcores(void)
{
const struct dpll_params *mpu_params;
/* Ensure I2C is initialized for PMIC configuration */
gpi2c_init();
/* Get the frequency */
mpu_params = get_dpll_mpu_params();
if (board_is_idk())
scale_vcores_idk(mpu_params->m);
else
scale_vcores_generic(mpu_params->m);
}
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
}
void set_mux_conf_regs(void)
{
enable_board_pin_mux();
}
static void enable_vtt_regulator(void)
{
u32 temp;
/* enable module */
writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO5_BASE + OMAP_GPIO_CTRL);
/* enable output for GPIO5_7 */
writel(GPIO_SETDATAOUT(7),
AM33XX_GPIO5_BASE + OMAP_GPIO_SETDATAOUT);
temp = readl(AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
temp = temp & ~(GPIO_OE_ENABLE(7));
writel(temp, AM33XX_GPIO5_BASE + OMAP_GPIO_OE);
}
enum {
RTC_BOARD_EPOS = 1,
RTC_BOARD_EVM14,
RTC_BOARD_EVM12,
RTC_BOARD_GPEVM,
RTC_BOARD_SK,
};
/*
* In the rtc_only+DRR in self-refresh boot path we have the board type info
* in the rtc scratch pad register hence we bypass the costly i2c reads to
* eeprom and directly programthe board name string
*/
void rtc_only_update_board_type(u32 btype)
{
const char *name = "";
const char *rev = "1.0";
switch (btype) {
case RTC_BOARD_EPOS:
name = "AM43EPOS";
break;
case RTC_BOARD_EVM14:
name = "AM43__GP";
rev = "1.4";
break;
case RTC_BOARD_EVM12:
name = "AM43__GP";
rev = "1.2";
break;
case RTC_BOARD_GPEVM:
name = "AM43__GP";
break;
case RTC_BOARD_SK:
name = "AM43__SK";
break;
}
ti_i2c_eeprom_am_set(name, rev);
}
u32 rtc_only_get_board_type(void)
{
if (board_is_eposevm())
return RTC_BOARD_EPOS;
else if (board_is_evm_14_or_later())
return RTC_BOARD_EVM14;
else if (board_is_evm_12_or_later())
return RTC_BOARD_EVM12;
else if (board_is_gpevm())
return RTC_BOARD_GPEVM;
else if (board_is_sk())
return RTC_BOARD_SK;
return 0;
}
void sdram_init(void)
{
/*
* EPOS EVM has 1GB LPDDR2 connected to EMIF.
* GP EMV has 1GB DDR3 connected to EMIF
* along with VTT regulator.
*/
if (board_is_eposevm()) {
config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0);
} else if (board_is_evm_14_or_later()) {
enable_vtt_regulator();
config_ddr(0, &ioregs_ddr3, NULL, NULL,
&ddr3_emif_regs_400Mhz_production, 0);
} else if (board_is_evm_12_or_later()) {
enable_vtt_regulator();
config_ddr(0, &ioregs_ddr3, NULL, NULL,
&ddr3_emif_regs_400Mhz_beta, 0);
} else if (board_is_evm()) {
enable_vtt_regulator();
config_ddr(0, &ioregs_ddr3, NULL, NULL,
&ddr3_emif_regs_400Mhz, 0);
} else if (board_is_sk()) {
config_ddr(400, &ioregs_ddr3, NULL, NULL,
&ddr3_sk_emif_regs_400Mhz, 0);
} else if (board_is_idk()) {
config_ddr(400, &ioregs_ddr3, NULL, NULL,
&ddr3_idk_emif_regs_400Mhz, 0);
}
}
#endif
/* setup board specific PMIC */
int power_init_board(void)
{
struct pmic *p;
if (board_is_idk()) {
power_tps62362_init(I2C_PMIC);
p = pmic_get("TPS62362");
if (p && !pmic_probe(p))
puts("PMIC: TPS62362\n");
} else {
power_tps65218_init(I2C_PMIC);
p = pmic_get("TPS65218_PMIC");
if (p && !pmic_probe(p))
puts("PMIC: TPS65218\n");
}
return 0;
}
int board_init(void)
{
struct l3f_cfg_bwlimiter *bwlimiter = (struct l3f_cfg_bwlimiter *)L3F_CFG_BWLIMITER;
u32 mreqprio_0, mreqprio_1, modena_init0_bw_fractional,
modena_init0_bw_integer, modena_init0_watermark_0;
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
gpmc_init();
/*
* Call this to initialize *ctrl again
*/
hw_data_init();
/* Clear all important bits for DSS errata that may need to be tweaked*/
mreqprio_0 = readl(&cdev->mreqprio_0) & MREQPRIO_0_SAB_INIT1_MASK &
MREQPRIO_0_SAB_INIT0_MASK;
mreqprio_1 = readl(&cdev->mreqprio_1) & MREQPRIO_1_DSS_MASK;
modena_init0_bw_fractional = readl(&bwlimiter->modena_init0_bw_fractional) &
BW_LIMITER_BW_FRAC_MASK;
modena_init0_bw_integer = readl(&bwlimiter->modena_init0_bw_integer) &
BW_LIMITER_BW_INT_MASK;
modena_init0_watermark_0 = readl(&bwlimiter->modena_init0_watermark_0) &
BW_LIMITER_BW_WATERMARK_MASK;
/* Setting MReq Priority of the DSS*/
mreqprio_0 |= 0x77;
/*
* Set L3 Fast Configuration Register
* Limiting bandwith for ARM core to 700 MBPS
*/
modena_init0_bw_fractional |= 0x10;
modena_init0_bw_integer |= 0x3;
writel(mreqprio_0, &cdev->mreqprio_0);
writel(mreqprio_1, &cdev->mreqprio_1);
writel(modena_init0_bw_fractional, &bwlimiter->modena_init0_bw_fractional);
writel(modena_init0_bw_integer, &bwlimiter->modena_init0_bw_integer);
writel(modena_init0_watermark_0, &bwlimiter->modena_init0_watermark_0);
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
set_board_info_env(NULL);
/*
* Default FIT boot on HS devices. Non FIT images are not allowed
* on HS devices.
*/
if (get_device_type() == HS_DEVICE)
env_set("boot_fit", "1");
#endif
return 0;
}
#endif
#ifdef CONFIG_USB_DWC3
static struct dwc3_device usb_otg_ss1 = {
.maximum_speed = USB_SPEED_HIGH,
.base = USB_OTG_SS1_BASE,
.tx_fifo_resize = false,
.index = 0,
};
static struct dwc3_omap_device usb_otg_ss1_glue = {
.base = (void *)USB_OTG_SS1_GLUE_BASE,
.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
.index = 0,
};
static struct ti_usb_phy_device usb_phy1_device = {
.usb2_phy_power = (void *)USB2_PHY1_POWER,
.index = 0,
};
static struct dwc3_device usb_otg_ss2 = {
.maximum_speed = USB_SPEED_HIGH,
.base = USB_OTG_SS2_BASE,
.tx_fifo_resize = false,
.index = 1,
};
static struct dwc3_omap_device usb_otg_ss2_glue = {
.base = (void *)USB_OTG_SS2_GLUE_BASE,
.utmi_mode = DWC3_OMAP_UTMI_MODE_SW,
.index = 1,
};
static struct ti_usb_phy_device usb_phy2_device = {
.usb2_phy_power = (void *)USB2_PHY2_POWER,
.index = 1,
};
int usb_gadget_handle_interrupts(int index)
{
u32 status;
status = dwc3_omap_uboot_interrupt_status(index);
if (status)
dwc3_uboot_handle_interrupt(index);
return 0;
}
#endif /* CONFIG_USB_DWC3 */
#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
int board_usb_init(int index, enum usb_init_type init)
{
enable_usb_clocks(index);
#ifdef CONFIG_USB_DWC3
switch (index) {
case 0:
if (init == USB_INIT_DEVICE) {
usb_otg_ss1.dr_mode = USB_DR_MODE_PERIPHERAL;
usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
dwc3_omap_uboot_init(&usb_otg_ss1_glue);
ti_usb_phy_uboot_init(&usb_phy1_device);
dwc3_uboot_init(&usb_otg_ss1);
}
break;
case 1:
if (init == USB_INIT_DEVICE) {
usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL;
usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID;
ti_usb_phy_uboot_init(&usb_phy2_device);
dwc3_omap_uboot_init(&usb_otg_ss2_glue);
dwc3_uboot_init(&usb_otg_ss2);
}
break;
default:
printf("Invalid Controller Index\n");
}
#endif
return 0;
}
int board_usb_cleanup(int index, enum usb_init_type init)
{
#ifdef CONFIG_USB_DWC3
switch (index) {
case 0:
case 1:
if (init == USB_INIT_DEVICE) {
ti_usb_phy_uboot_exit(index);
dwc3_uboot_exit(index);
dwc3_omap_uboot_exit(index);
}
break;
default:
printf("Invalid Controller Index\n");
}
#endif
disable_usb_clocks(index);
return 0;
}
#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */
#ifdef CONFIG_DRIVER_TI_CPSW
static void cpsw_control(int enabled)
{
/* Additional controls can be added here */
return;
}
static struct cpsw_slave_data cpsw_slaves[] = {
{
.slave_reg_ofs = 0x208,
.sliver_reg_ofs = 0xd80,
.phy_addr = 16,
},
{
.slave_reg_ofs = 0x308,
.sliver_reg_ofs = 0xdc0,
.phy_addr = 1,
},
};
static struct cpsw_platform_data cpsw_data = {
.mdio_base = CPSW_MDIO_BASE,
.cpsw_base = CPSW_BASE,
.mdio_div = 0xff,
.channels = 8,
.cpdma_reg_ofs = 0x800,
.slaves = 1,
.slave_data = cpsw_slaves,
.ale_reg_ofs = 0xd00,
.ale_entries = 1024,
.host_port_reg_ofs = 0x108,
.hw_stats_reg_ofs = 0x900,
.bd_ram_ofs = 0x2000,
.mac_control = (1 << 5),
.control = cpsw_control,
.host_port_num = 0,
.version = CPSW_CTRL_VERSION_2,
};
int board_eth_init(bd_t *bis)
{
int rv;
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
/* try reading mac address from efuse */
mac_lo = readl(&cdev->macid0l);
mac_hi = readl(&cdev->macid0h);
mac_addr[0] = mac_hi & 0xFF;
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
if (!env_get("ethaddr")) {
puts("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("ethaddr", mac_addr);
}
mac_lo = readl(&cdev->macid1l);
mac_hi = readl(&cdev->macid1h);
mac_addr[0] = mac_hi & 0xFF;
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
if (board_is_eposevm()) {
writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
cpsw_slaves[0].phy_addr = 16;
} else if (board_is_sk()) {
writel(RGMII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
cpsw_slaves[0].phy_addr = 4;
cpsw_slaves[1].phy_addr = 5;
} else if (board_is_idk()) {
writel(RGMII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
cpsw_slaves[0].phy_addr = 0;
} else {
writel(RGMII_MODE_ENABLE, &cdev->miisel);
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RGMII;
cpsw_slaves[0].phy_addr = 0;
}
rv = cpsw_register(&cpsw_data);
if (rv < 0)
printf("Error %d registering CPSW switch\n", rv);
return rv;
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
return 0;
}
#endif
#if defined(CONFIG_SPL_LOAD_FIT) || defined(CONFIG_DTB_RESELECT)
int board_fit_config_name_match(const char *name)
{
bool eeprom_read = board_ti_was_eeprom_read();
if (!strcmp(name, "am4372-generic") && !eeprom_read)
return 0;
else if (board_is_evm() && !strcmp(name, "am437x-gp-evm"))
return 0;
else if (board_is_sk() && !strcmp(name, "am437x-sk-evm"))
return 0;
else if (board_is_eposevm() && !strcmp(name, "am43x-epos-evm"))
return 0;
else if (board_is_idk() && !strcmp(name, "am437x-idk-evm"))
return 0;
else
return -1;
}
#endif
#ifdef CONFIG_DTB_RESELECT
int embedded_dtb_select(void)
{
do_board_detect();
fdtdec_setup();
return 0;
}
#endif
#ifdef CONFIG_TI_SECURE_DEVICE
void board_fit_image_post_process(void **p_image, size_t *p_size)
{
secure_boot_verify_image(p_image, p_size);
}
void board_tee_image_process(ulong tee_image, size_t tee_size)
{
secure_tee_install((u32)tee_image);
}
U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TEE, board_tee_image_process);
#endif
Reference in a new issue View git blame Copy permalink