mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-26 04:53:42 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| imx6logic.c | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| mx6q_2x_MT41K512M16HA.cfg | ||
| README | ||
U-Boot for LogicPD i.MX6 Development Kit ---------------------------------------- This file contains information for the port of U-Boot to the Logic PD Development kit. Logic PD has an i.MX6 System On Module (SOM) and a correspondong development board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has an SMSC Ethernet PHY, serial debug port and a variety of peripherals. On the intial release, the SOM came with either an i.MX6D or i.MX6Q. For more details about Logic PD i.MX6 Development kit, visit: https://www.logicpd.com/ Building U-Boot for Logic PD Development Kit -------------------------------------------- To build U-Boot for the Dual and Quad variants: make imx6q_logic_defconfig make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux- Flashing U-Boot into the SD card -------------------------------- See README.imximage for details on booting from SD Flashing U-Boot into NAND ------------------------- Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following: with: kobs-ng init -v -x u-boot-dtb.imx Additional Support Documentation can be found at: https://support.logicpd.com/