mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
f43d9e904d
Move gpio controller nodes from am33xx.dtsi to am33xx-l4.dtsi. Now both files are more similar to those found in Linux 5.9-rc7. To be fully operational as before it was also necessary to fix the am33xx-clock.dtsi file. It too is now almost the same as the Linux kernel. Signed-off-by: Dario Binacchi <dariobin@libero.it>
2026 lines
57 KiB
Text
2026 lines
57 KiB
Text
&l4_wkup { /* 0x44c00000 */
|
|
compatible = "ti,am33xx-l4-wkup", "simple-bus";
|
|
reg = <0x44c00000 0x800>,
|
|
<0x44c00800 0x800>,
|
|
<0x44c01000 0x400>,
|
|
<0x44c01400 0x400>;
|
|
reg-names = "ap", "la", "ia0", "ia1";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */
|
|
<0x00100000 0x44d00000 0x100000>, /* segment 1 */
|
|
<0x00200000 0x44e00000 0x100000>; /* segment 2 */
|
|
|
|
segment@0 { /* 0x44c00000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 1 */
|
|
<0x00001000 0x00001000 0x000400>, /* ap 2 */
|
|
<0x00001400 0x00001400 0x000400>; /* ap 3 */
|
|
};
|
|
|
|
segment@100000 { /* 0x44d00000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */
|
|
<0x00004000 0x00104000 0x001000>, /* ap 5 */
|
|
<0x00080000 0x00180000 0x002000>, /* ap 6 */
|
|
<0x00082000 0x00182000 0x001000>; /* ap 7 */
|
|
|
|
target-module@0 { /* 0x44d00000, ap 4 28.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x0 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
target-module@80000 { /* 0x44d80000, ap 6 10.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x80000 0x2000>;
|
|
};
|
|
};
|
|
|
|
segment@200000 { /* 0x44e00000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */
|
|
<0x00002000 0x00202000 0x001000>, /* ap 9 */
|
|
<0x00003000 0x00203000 0x001000>, /* ap 10 */
|
|
<0x00004000 0x00204000 0x001000>, /* ap 11 */
|
|
<0x00005000 0x00205000 0x001000>, /* ap 12 */
|
|
<0x00006000 0x00206000 0x001000>, /* ap 13 */
|
|
<0x00007000 0x00207000 0x001000>, /* ap 14 */
|
|
<0x00008000 0x00208000 0x001000>, /* ap 15 */
|
|
<0x00009000 0x00209000 0x001000>, /* ap 16 */
|
|
<0x0000a000 0x0020a000 0x001000>, /* ap 17 */
|
|
<0x0000b000 0x0020b000 0x001000>, /* ap 18 */
|
|
<0x0000c000 0x0020c000 0x001000>, /* ap 19 */
|
|
<0x0000d000 0x0020d000 0x001000>, /* ap 20 */
|
|
<0x0000f000 0x0020f000 0x001000>, /* ap 21 */
|
|
<0x00010000 0x00210000 0x010000>, /* ap 22 */
|
|
<0x00020000 0x00220000 0x010000>, /* ap 23 */
|
|
<0x00030000 0x00230000 0x001000>, /* ap 24 */
|
|
<0x00031000 0x00231000 0x001000>, /* ap 25 */
|
|
<0x00032000 0x00232000 0x001000>, /* ap 26 */
|
|
<0x00033000 0x00233000 0x001000>, /* ap 27 */
|
|
<0x00034000 0x00234000 0x001000>, /* ap 28 */
|
|
<0x00035000 0x00235000 0x001000>, /* ap 29 */
|
|
<0x00036000 0x00236000 0x001000>, /* ap 30 */
|
|
<0x00037000 0x00237000 0x001000>, /* ap 31 */
|
|
<0x00038000 0x00238000 0x001000>, /* ap 32 */
|
|
<0x00039000 0x00239000 0x001000>, /* ap 33 */
|
|
<0x0003a000 0x0023a000 0x001000>, /* ap 34 */
|
|
<0x0003e000 0x0023e000 0x001000>, /* ap 35 */
|
|
<0x0003f000 0x0023f000 0x001000>, /* ap 36 */
|
|
<0x0000e000 0x0020e000 0x001000>, /* ap 37 */
|
|
<0x00040000 0x00240000 0x040000>, /* ap 38 */
|
|
<0x00080000 0x00280000 0x001000>; /* ap 39 */
|
|
|
|
target-module@0 { /* 0x44e00000, ap 8 58.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x2000>;
|
|
|
|
prcm: prcm@0 {
|
|
compatible = "ti,am3-prcm", "simple-bus";
|
|
reg = <0 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x2000>;
|
|
|
|
prcm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
prcm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@3000 { /* 0x44e03000, ap 10 0a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3000 0x1000>;
|
|
};
|
|
|
|
target-module@5000 { /* 0x44e05000, ap 12 30.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x5000 0x1000>;
|
|
};
|
|
|
|
gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x7000 0x4>,
|
|
<0x7010 0x4>,
|
|
<0x7114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
|
|
clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
|
|
<&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x7000 0x1000>;
|
|
|
|
gpio0: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
gpio-ranges = <&am33xx_pinmux 0 82 8>,
|
|
<&am33xx_pinmux 8 52 4>,
|
|
<&am33xx_pinmux 12 94 4>,
|
|
<&am33xx_pinmux 16 71 2>,
|
|
<&am33xx_pinmux 18 135 1>,
|
|
<&am33xx_pinmux 19 108 2>,
|
|
<&am33xx_pinmux 21 73 1>,
|
|
<&am33xx_pinmux 22 8 2>,
|
|
<&am33xx_pinmux 26 10 2>,
|
|
<&am33xx_pinmux 28 74 1>,
|
|
<&am33xx_pinmux 29 81 1>,
|
|
<&am33xx_pinmux 30 28 2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <96>;
|
|
};
|
|
};
|
|
|
|
target-module@9000 { /* 0x44e09000, ap 16 04.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x9050 0x4>,
|
|
<0x9054 0x4>,
|
|
<0x9058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
|
|
clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x9000 0x1000>;
|
|
|
|
uart0: serial@0 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <72>;
|
|
status = "disabled";
|
|
dmas = <&edma 26 0>, <&edma 27 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@b000 { /* 0x44e0b000, ap 18 48.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xb000 0x8>,
|
|
<0xb010 0x8>,
|
|
<0xb090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
|
|
clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xb000 0x1000>;
|
|
};
|
|
|
|
target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xd000 0x4>,
|
|
<0xd010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
|
|
clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x0000d000 0x00001000>,
|
|
<0x00001000 0x0000e000 0x00001000>;
|
|
|
|
tscadc: tscadc@0 {
|
|
compatible = "ti,am3359-tscadc";
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <16>;
|
|
status = "disabled";
|
|
dmas = <&edma 53 0>, <&edma 57 0>;
|
|
dma-names = "fifo0", "fifo1";
|
|
|
|
tsc {
|
|
compatible = "ti,am3359-tsc";
|
|
};
|
|
am335x_adc: adc {
|
|
#io-channel-cells = <1>;
|
|
compatible = "ti,am3359-adc";
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
target-module@10000 { /* 0x44e10000, ap 22 0c.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x10000 0x4>;
|
|
reg-names = "rev";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00010000 0x00010000>,
|
|
<0x00010000 0x00020000 0x00010000>;
|
|
|
|
scm: scm@0 {
|
|
compatible = "ti,am3-scm", "simple-bus";
|
|
reg = <0x0 0x2000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#pinctrl-cells = <1>;
|
|
ranges = <0 0 0x2000>;
|
|
|
|
am33xx_pinmux: pinmux@800 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x800 0x238>;
|
|
#pinctrl-cells = <2>;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x7f>;
|
|
};
|
|
|
|
scm_conf: scm_conf@0 {
|
|
compatible = "syscon", "simple-bus";
|
|
reg = <0x0 0x800>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0 0x800>;
|
|
|
|
phy_gmii_sel: phy-gmii-sel {
|
|
compatible = "ti,am3352-phy-gmii-sel";
|
|
reg = <0x650 0x4>;
|
|
#phy-cells = <2>;
|
|
};
|
|
|
|
scm_clocks: clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
wkup_m3_ipc: wkup_m3_ipc@1324 {
|
|
compatible = "ti,am3352-wkup-m3-ipc";
|
|
reg = <0x1324 0x24>;
|
|
interrupts = <78>;
|
|
ti,rproc = <&wkup_m3>;
|
|
mboxes = <&mailbox &mbox_wkupm3>;
|
|
};
|
|
|
|
edma_xbar: dma-router@f90 {
|
|
compatible = "ti,am335x-edma-crossbar";
|
|
reg = <0xf90 0x40>;
|
|
#dma-cells = <3>;
|
|
dma-requests = <32>;
|
|
dma-masters = <&edma>;
|
|
};
|
|
|
|
scm_clockdomains: clockdomains {
|
|
};
|
|
};
|
|
};
|
|
|
|
timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */
|
|
compatible = "ti,sysc-omap2-timer", "ti,sysc";
|
|
reg = <0x31000 0x4>,
|
|
<0x31010 0x4>,
|
|
<0x31014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
|
|
clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x31000 0x1000>;
|
|
|
|
timer1: timer@0 {
|
|
compatible = "ti,am335x-timer-1ms";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <67>;
|
|
ti,timer-alwon;
|
|
clocks = <&timer1_fck>;
|
|
clock-names = "fck";
|
|
};
|
|
};
|
|
|
|
target-module@33000 { /* 0x44e33000, ap 27 18.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x33000 0x1000>;
|
|
};
|
|
|
|
target-module@35000 { /* 0x44e35000, ap 29 50.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x35000 0x4>,
|
|
<0x35010 0x4>,
|
|
<0x35014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
|
|
SYSC_OMAP2_SOFTRESET)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
|
|
clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x35000 0x1000>;
|
|
};
|
|
|
|
target-module@37000 { /* 0x44e37000, ap 31 08.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x37000 0x1000>;
|
|
};
|
|
|
|
target-module@39000 { /* 0x44e39000, ap 33 02.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x39000 0x1000>;
|
|
};
|
|
|
|
target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */
|
|
compatible = "ti,sysc-omap4-simple", "ti,sysc";
|
|
reg = <0x3e074 0x4>,
|
|
<0x3e078 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
|
|
clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3e000 0x1000>;
|
|
|
|
rtc: rtc@0 {
|
|
compatible = "ti,am3352-rtc", "ti,da830-rtc";
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <75 76>;
|
|
};
|
|
};
|
|
|
|
target-module@40000 { /* 0x44e40000, ap 38 68.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x40000 0x40000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&l4_fw { /* 0x47c00000 */
|
|
compatible = "ti,am33xx-l4-fw", "simple-bus";
|
|
reg = <0x47c00000 0x800>,
|
|
<0x47c00800 0x800>,
|
|
<0x47c01000 0x400>;
|
|
reg-names = "ap", "la", "ia0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x47c00000 0x1000000>; /* segment 0 */
|
|
|
|
segment@0 { /* 0x47c00000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 1 */
|
|
<0x00001000 0x00001000 0x000400>, /* ap 2 */
|
|
<0x0000c000 0x0000c000 0x001000>, /* ap 3 */
|
|
<0x0000d000 0x0000d000 0x001000>, /* ap 4 */
|
|
<0x0000e000 0x0000e000 0x001000>, /* ap 5 */
|
|
<0x0000f000 0x0000f000 0x001000>, /* ap 6 */
|
|
<0x00010000 0x00010000 0x001000>, /* ap 7 */
|
|
<0x00011000 0x00011000 0x001000>, /* ap 8 */
|
|
<0x0001a000 0x0001a000 0x001000>, /* ap 9 */
|
|
<0x0001b000 0x0001b000 0x001000>, /* ap 10 */
|
|
<0x00024000 0x00024000 0x001000>, /* ap 11 */
|
|
<0x00025000 0x00025000 0x001000>, /* ap 12 */
|
|
<0x00026000 0x00026000 0x001000>, /* ap 13 */
|
|
<0x00027000 0x00027000 0x001000>, /* ap 14 */
|
|
<0x00030000 0x00030000 0x001000>, /* ap 15 */
|
|
<0x00031000 0x00031000 0x001000>, /* ap 16 */
|
|
<0x00038000 0x00038000 0x001000>, /* ap 17 */
|
|
<0x00039000 0x00039000 0x001000>, /* ap 18 */
|
|
<0x0003a000 0x0003a000 0x001000>, /* ap 19 */
|
|
<0x0003b000 0x0003b000 0x001000>, /* ap 20 */
|
|
<0x0003e000 0x0003e000 0x001000>, /* ap 21 */
|
|
<0x0003f000 0x0003f000 0x001000>, /* ap 22 */
|
|
<0x0003c000 0x0003c000 0x001000>, /* ap 23 */
|
|
<0x00040000 0x00040000 0x001000>, /* ap 24 */
|
|
<0x00046000 0x00046000 0x001000>, /* ap 25 */
|
|
<0x00047000 0x00047000 0x001000>, /* ap 26 */
|
|
<0x00044000 0x00044000 0x001000>, /* ap 27 */
|
|
<0x00045000 0x00045000 0x001000>, /* ap 28 */
|
|
<0x00028000 0x00028000 0x001000>, /* ap 29 */
|
|
<0x00029000 0x00029000 0x001000>, /* ap 30 */
|
|
<0x00032000 0x00032000 0x001000>, /* ap 31 */
|
|
<0x00033000 0x00033000 0x001000>, /* ap 32 */
|
|
<0x0003d000 0x0003d000 0x001000>, /* ap 33 */
|
|
<0x00041000 0x00041000 0x001000>, /* ap 34 */
|
|
<0x00042000 0x00042000 0x001000>, /* ap 35 */
|
|
<0x00043000 0x00043000 0x001000>, /* ap 36 */
|
|
<0x00014000 0x00014000 0x001000>, /* ap 37 */
|
|
<0x00015000 0x00015000 0x001000>; /* ap 38 */
|
|
|
|
target-module@c000 { /* 0x47c0c000, ap 3 04.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xc000 0x1000>;
|
|
};
|
|
|
|
target-module@e000 { /* 0x47c0e000, ap 5 0c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xe000 0x1000>;
|
|
};
|
|
|
|
target-module@10000 { /* 0x47c10000, ap 7 20.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x10000 0x1000>;
|
|
};
|
|
|
|
target-module@14000 { /* 0x47c14000, ap 37 3c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x14000 0x1000>;
|
|
};
|
|
|
|
target-module@1a000 { /* 0x47c1a000, ap 9 08.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x1a000 0x1000>;
|
|
};
|
|
|
|
target-module@24000 { /* 0x47c24000, ap 11 28.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
};
|
|
|
|
target-module@26000 { /* 0x47c26000, ap 13 30.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x26000 0x1000>;
|
|
};
|
|
|
|
target-module@28000 { /* 0x47c28000, ap 29 40.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x28000 0x1000>;
|
|
};
|
|
|
|
target-module@30000 { /* 0x47c30000, ap 15 14.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x30000 0x1000>;
|
|
};
|
|
|
|
target-module@32000 { /* 0x47c32000, ap 31 06.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x32000 0x1000>;
|
|
};
|
|
|
|
target-module@38000 { /* 0x47c38000, ap 17 18.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x38000 0x1000>;
|
|
};
|
|
|
|
target-module@3a000 { /* 0x47c3a000, ap 19 1c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3a000 0x1000>;
|
|
};
|
|
|
|
target-module@3c000 { /* 0x47c3c000, ap 23 38.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3c000 0x1000>;
|
|
};
|
|
|
|
target-module@3e000 { /* 0x47c3e000, ap 21 10.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3e000 0x1000>;
|
|
};
|
|
|
|
target-module@40000 { /* 0x47c40000, ap 24 02.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x40000 0x1000>;
|
|
};
|
|
|
|
target-module@42000 { /* 0x47c42000, ap 35 34.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x42000 0x1000>;
|
|
};
|
|
|
|
target-module@44000 { /* 0x47c44000, ap 27 24.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x44000 0x1000>;
|
|
};
|
|
|
|
target-module@46000 { /* 0x47c46000, ap 25 2c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x46000 0x1000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&l4_fast { /* 0x4a000000 */
|
|
compatible = "ti,am33xx-l4-fast", "simple-bus";
|
|
reg = <0x4a000000 0x800>,
|
|
<0x4a000800 0x800>,
|
|
<0x4a001000 0x400>;
|
|
reg-names = "ap", "la", "ia0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */
|
|
|
|
segment@0 { /* 0x4a000000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 1 */
|
|
<0x00001000 0x00001000 0x000400>, /* ap 2 */
|
|
<0x00100000 0x00100000 0x008000>, /* ap 3 */
|
|
<0x00108000 0x00108000 0x001000>, /* ap 4 */
|
|
<0x00180000 0x00180000 0x020000>, /* ap 5 */
|
|
<0x001a0000 0x001a0000 0x001000>, /* ap 6 */
|
|
<0x00200000 0x00200000 0x080000>, /* ap 7 */
|
|
<0x00280000 0x00280000 0x001000>, /* ap 8 */
|
|
<0x00300000 0x00300000 0x080000>, /* ap 9 */
|
|
<0x00380000 0x00380000 0x001000>; /* ap 10 */
|
|
|
|
target-module@100000 { /* 0x4a100000, ap 3 08.0 */
|
|
compatible = "ti,sysc-omap4-simple", "ti,sysc";
|
|
reg = <0x101200 0x4>,
|
|
<0x101208 0x4>,
|
|
<0x101204 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <0>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>;
|
|
ti,syss-mask = <1>;
|
|
clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x100000 0x8000>;
|
|
};
|
|
|
|
target-module@180000 { /* 0x4a180000, ap 5 10.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x180000 0x20000>;
|
|
};
|
|
|
|
target-module@200000 { /* 0x4a200000, ap 7 02.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x200000 0x80000>;
|
|
};
|
|
|
|
pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */
|
|
compatible = "ti,sysc-pruss", "ti,sysc";
|
|
reg = <0x326000 0x4>,
|
|
<0x326004 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
|
|
SYSC_PRUSS_SUB_MWAIT)>;
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
resets = <&prm_per 1>;
|
|
reset-names = "rstctrl";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x300000 0x80000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&l4_mpuss { /* 0x4b140000 */
|
|
compatible = "ti,am33xx-l4-mpuss", "simple-bus";
|
|
reg = <0x4b144400 0x100>,
|
|
<0x4b144800 0x400>;
|
|
reg-names = "la", "ap";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x4b140000 0x008000>; /* segment 0 */
|
|
|
|
segment@0 { /* 0x4b140000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00004800 0x00004800 0x000400>, /* ap 0 */
|
|
<0x00001000 0x00001000 0x001000>, /* ap 1 */
|
|
<0x00002000 0x00002000 0x001000>, /* ap 2 */
|
|
<0x00004000 0x00004000 0x000400>, /* ap 3 */
|
|
<0x00005000 0x00005000 0x000400>, /* ap 4 */
|
|
<0x00000000 0x00000000 0x001000>, /* ap 5 */
|
|
<0x00003000 0x00003000 0x001000>, /* ap 6 */
|
|
<0x00000800 0x00000800 0x000800>; /* ap 7 */
|
|
|
|
target-module@0 { /* 0x4b140000, ap 5 02.2 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x00001000>,
|
|
<0x00001000 0x00001000 0x00001000>,
|
|
<0x00002000 0x00002000 0x00001000>;
|
|
};
|
|
|
|
target-module@3000 { /* 0x4b143000, ap 6 04.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3000 0x1000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&l4_per { /* 0x48000000 */
|
|
compatible = "ti,am33xx-l4-per", "simple-bus";
|
|
reg = <0x48000000 0x800>,
|
|
<0x48000800 0x800>,
|
|
<0x48001000 0x400>,
|
|
<0x48001400 0x400>,
|
|
<0x48001800 0x400>,
|
|
<0x48001c00 0x400>;
|
|
reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */
|
|
<0x00100000 0x48100000 0x100000>, /* segment 1 */
|
|
<0x00200000 0x48200000 0x100000>, /* segment 2 */
|
|
<0x00300000 0x48300000 0x100000>, /* segment 3 */
|
|
<0x46000000 0x46000000 0x400000>, /* l3 data port */
|
|
<0x46400000 0x46400000 0x400000>; /* l3 data port */
|
|
|
|
segment@0 { /* 0x48000000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
|
|
<0x00000800 0x00000800 0x000800>, /* ap 1 */
|
|
<0x00001000 0x00001000 0x000400>, /* ap 2 */
|
|
<0x00001400 0x00001400 0x000400>, /* ap 3 */
|
|
<0x00001800 0x00001800 0x000400>, /* ap 4 */
|
|
<0x00001c00 0x00001c00 0x000400>, /* ap 5 */
|
|
<0x00008000 0x00008000 0x001000>, /* ap 6 */
|
|
<0x00009000 0x00009000 0x001000>, /* ap 7 */
|
|
<0x00016000 0x00016000 0x001000>, /* ap 8 */
|
|
<0x00017000 0x00017000 0x001000>, /* ap 9 */
|
|
<0x00022000 0x00022000 0x001000>, /* ap 10 */
|
|
<0x00023000 0x00023000 0x001000>, /* ap 11 */
|
|
<0x00024000 0x00024000 0x001000>, /* ap 12 */
|
|
<0x00025000 0x00025000 0x001000>, /* ap 13 */
|
|
<0x0002a000 0x0002a000 0x001000>, /* ap 14 */
|
|
<0x0002b000 0x0002b000 0x001000>, /* ap 15 */
|
|
<0x00038000 0x00038000 0x002000>, /* ap 16 */
|
|
<0x0003a000 0x0003a000 0x001000>, /* ap 17 */
|
|
<0x00014000 0x00014000 0x001000>, /* ap 18 */
|
|
<0x00015000 0x00015000 0x001000>, /* ap 19 */
|
|
<0x0003c000 0x0003c000 0x002000>, /* ap 20 */
|
|
<0x0003e000 0x0003e000 0x001000>, /* ap 21 */
|
|
<0x00040000 0x00040000 0x001000>, /* ap 22 */
|
|
<0x00041000 0x00041000 0x001000>, /* ap 23 */
|
|
<0x00042000 0x00042000 0x001000>, /* ap 24 */
|
|
<0x00043000 0x00043000 0x001000>, /* ap 25 */
|
|
<0x00044000 0x00044000 0x001000>, /* ap 26 */
|
|
<0x00045000 0x00045000 0x001000>, /* ap 27 */
|
|
<0x00046000 0x00046000 0x001000>, /* ap 28 */
|
|
<0x00047000 0x00047000 0x001000>, /* ap 29 */
|
|
<0x00048000 0x00048000 0x001000>, /* ap 30 */
|
|
<0x00049000 0x00049000 0x001000>, /* ap 31 */
|
|
<0x0004c000 0x0004c000 0x001000>, /* ap 32 */
|
|
<0x0004d000 0x0004d000 0x001000>, /* ap 33 */
|
|
<0x00050000 0x00050000 0x002000>, /* ap 34 */
|
|
<0x00052000 0x00052000 0x001000>, /* ap 35 */
|
|
<0x00060000 0x00060000 0x001000>, /* ap 36 */
|
|
<0x00061000 0x00061000 0x001000>, /* ap 37 */
|
|
<0x00080000 0x00080000 0x010000>, /* ap 38 */
|
|
<0x00090000 0x00090000 0x001000>, /* ap 39 */
|
|
<0x000a0000 0x000a0000 0x010000>, /* ap 40 */
|
|
<0x000b0000 0x000b0000 0x001000>, /* ap 41 */
|
|
<0x00030000 0x00030000 0x001000>, /* ap 77 */
|
|
<0x00031000 0x00031000 0x001000>, /* ap 78 */
|
|
<0x0004a000 0x0004a000 0x001000>, /* ap 85 */
|
|
<0x0004b000 0x0004b000 0x001000>, /* ap 86 */
|
|
<0x000c8000 0x000c8000 0x001000>, /* ap 87 */
|
|
<0x000c9000 0x000c9000 0x001000>, /* ap 88 */
|
|
<0x000cc000 0x000cc000 0x001000>, /* ap 89 */
|
|
<0x000cd000 0x000cd000 0x001000>, /* ap 90 */
|
|
<0x000ca000 0x000ca000 0x001000>, /* ap 91 */
|
|
<0x000cb000 0x000cb000 0x001000>, /* ap 92 */
|
|
<0x46000000 0x46000000 0x400000>, /* l3 data port */
|
|
<0x46400000 0x46400000 0x400000>; /* l3 data port */
|
|
|
|
target-module@8000 { /* 0x48008000, ap 6 10.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8000 0x1000>;
|
|
};
|
|
|
|
target-module@14000 { /* 0x48014000, ap 18 58.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x14000 0x1000>;
|
|
};
|
|
|
|
target-module@16000 { /* 0x48016000, ap 8 3c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x16000 0x1000>;
|
|
};
|
|
|
|
target-module@22000 { /* 0x48022000, ap 10 12.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x22050 0x4>,
|
|
<0x22054 0x4>,
|
|
<0x22058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x22000 0x1000>;
|
|
|
|
uart1: serial@0 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <73>;
|
|
status = "disabled";
|
|
dmas = <&edma 28 0>, <&edma 29 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@24000 { /* 0x48024000, ap 12 14.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x24050 0x4>,
|
|
<0x24054 0x4>,
|
|
<0x24058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
|
|
uart2: serial@0 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <74>;
|
|
status = "disabled";
|
|
dmas = <&edma 30 0>, <&edma 31 0>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x2a000 0x8>,
|
|
<0x2a010 0x8>,
|
|
<0x2a090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2a000 0x1000>;
|
|
};
|
|
|
|
target-module@30000 { /* 0x48030000, ap 77 08.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x30000 0x4>,
|
|
<0x30110 0x4>,
|
|
<0x30114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x30000 0x1000>;
|
|
|
|
spi0: spi@0 {
|
|
compatible = "ti,omap4-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x400>;
|
|
interrupts = <65>;
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&edma 16 0
|
|
&edma 17 0
|
|
&edma 18 0
|
|
&edma 19 0>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@38000 { /* 0x48038000, ap 16 02.0 */
|
|
compatible = "ti,sysc-omap4-simple", "ti,sysc";
|
|
reg = <0x38000 0x4>,
|
|
<0x38004 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
/* Domains (P, C): per_pwrdm, l3s_clkdm */
|
|
clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x38000 0x2000>,
|
|
<0x46000000 0x46000000 0x400000>;
|
|
|
|
mcasp0: mcasp@0 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
reg = <0x0 0x2000>,
|
|
<0x46000000 0x400000>;
|
|
reg-names = "mpu", "dat";
|
|
interrupts = <80>, <81>;
|
|
interrupt-names = "tx", "rx";
|
|
status = "disabled";
|
|
dmas = <&edma 8 2>,
|
|
<&edma 9 2>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
target-module@3c000 { /* 0x4803c000, ap 20 32.0 */
|
|
compatible = "ti,sysc-omap4-simple", "ti,sysc";
|
|
reg = <0x3c000 0x4>,
|
|
<0x3c004 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
/* Domains (P, C): per_pwrdm, l3s_clkdm */
|
|
clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x3c000 0x2000>,
|
|
<0x46400000 0x46400000 0x400000>;
|
|
|
|
mcasp1: mcasp@0 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
reg = <0x0 0x2000>,
|
|
<0x46400000 0x400000>;
|
|
reg-names = "mpu", "dat";
|
|
interrupts = <82>, <83>;
|
|
interrupt-names = "tx", "rx";
|
|
status = "disabled";
|
|
dmas = <&edma 10 2>,
|
|
<&edma 11 2>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
};
|
|
|
|
timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
reg = <0x40000 0x4>,
|
|
<0x40010 0x4>,
|
|
<0x40014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x40000 0x1000>;
|
|
|
|
timer2: timer@0 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <68>;
|
|
clocks = <&timer2_fck>;
|
|
clock-names = "fck";
|
|
};
|
|
};
|
|
|
|
target-module@42000 { /* 0x48042000, ap 24 1c.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
reg = <0x42000 0x4>,
|
|
<0x42010 0x4>,
|
|
<0x42014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x42000 0x1000>;
|
|
|
|
timer3: timer@0 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <69>;
|
|
};
|
|
};
|
|
|
|
target-module@44000 { /* 0x48044000, ap 26 26.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
reg = <0x44000 0x4>,
|
|
<0x44010 0x4>,
|
|
<0x44014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x44000 0x1000>;
|
|
|
|
timer4: timer@0 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <92>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@46000 { /* 0x48046000, ap 28 28.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
reg = <0x46000 0x4>,
|
|
<0x46010 0x4>,
|
|
<0x46014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x46000 0x1000>;
|
|
|
|
timer5: timer@0 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <93>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@48000 { /* 0x48048000, ap 30 22.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
reg = <0x48000 0x4>,
|
|
<0x48010 0x4>,
|
|
<0x48014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x48000 0x1000>;
|
|
|
|
timer6: timer@0 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <94>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@4a000 { /* 0x4804a000, ap 85 60.0 */
|
|
compatible = "ti,sysc-omap4-timer", "ti,sysc";
|
|
reg = <0x4a000 0x4>,
|
|
<0x4a010 0x4>,
|
|
<0x4a014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4a000 0x1000>;
|
|
|
|
timer7: timer@0 {
|
|
compatible = "ti,am335x-timer";
|
|
reg = <0x0 0x400>;
|
|
interrupts = <95>;
|
|
ti,timer-pwm;
|
|
};
|
|
};
|
|
|
|
target-module@4c000 { /* 0x4804c000, ap 32 36.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x4c000 0x4>,
|
|
<0x4c010 0x4>,
|
|
<0x4c114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
|
|
<&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4c000 0x1000>;
|
|
|
|
gpio1: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
gpio-ranges = <&am33xx_pinmux 0 0 8>,
|
|
<&am33xx_pinmux 8 90 4>,
|
|
<&am33xx_pinmux 12 12 16>,
|
|
<&am33xx_pinmux 28 30 4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <98>;
|
|
};
|
|
};
|
|
|
|
target-module@50000 { /* 0x48050000, ap 34 2c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x50000 0x2000>;
|
|
};
|
|
|
|
target-module@60000 { /* 0x48060000, ap 36 0c.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x602fc 0x4>,
|
|
<0x60110 0x4>,
|
|
<0x60114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x60000 0x1000>;
|
|
};
|
|
|
|
target-module@80000 { /* 0x48080000, ap 38 18.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x80000 0x4>,
|
|
<0x80010 0x4>,
|
|
<0x80014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x80000 0x10000>;
|
|
|
|
elm: elm@0 {
|
|
compatible = "ti,am3352-elm";
|
|
reg = <0x0 0x2000>;
|
|
interrupts = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@a0000 { /* 0x480a0000, ap 40 5e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa0000 0x10000>;
|
|
};
|
|
|
|
target-module@c8000 { /* 0x480c8000, ap 87 06.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xc8000 0x4>,
|
|
<0xc8010 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xc8000 0x1000>;
|
|
|
|
mailbox: mailbox@0 {
|
|
compatible = "ti,omap4-mailbox";
|
|
reg = <0x0 0x200>;
|
|
interrupts = <77>;
|
|
#mbox-cells = <1>;
|
|
ti,mbox-num-users = <4>;
|
|
ti,mbox-num-fifos = <8>;
|
|
mbox_wkupm3: wkup_m3 {
|
|
ti,mbox-send-noirq;
|
|
ti,mbox-tx = <0 0 0>;
|
|
ti,mbox-rx = <0 0 3>;
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@ca000 { /* 0x480ca000, ap 91 40.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xca000 0x4>,
|
|
<0xca010 0x4>,
|
|
<0xca014 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xca000 0x1000>;
|
|
|
|
hwspinlock: spinlock@0 {
|
|
compatible = "ti,omap4-hwspinlock";
|
|
reg = <0x0 0x1000>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
target-module@cc000 { /* 0x480cc000, ap 89 0e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xcc000 0x1000>;
|
|
};
|
|
};
|
|
|
|
segment@100000 { /* 0x48100000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */
|
|
<0x0008d000 0x0018d000 0x001000>, /* ap 43 */
|
|
<0x0008e000 0x0018e000 0x001000>, /* ap 44 */
|
|
<0x0008f000 0x0018f000 0x001000>, /* ap 45 */
|
|
<0x0009c000 0x0019c000 0x001000>, /* ap 46 */
|
|
<0x0009d000 0x0019d000 0x001000>, /* ap 47 */
|
|
<0x000a6000 0x001a6000 0x001000>, /* ap 48 */
|
|
<0x000a7000 0x001a7000 0x001000>, /* ap 49 */
|
|
<0x000a8000 0x001a8000 0x001000>, /* ap 50 */
|
|
<0x000a9000 0x001a9000 0x001000>, /* ap 51 */
|
|
<0x000aa000 0x001aa000 0x001000>, /* ap 52 */
|
|
<0x000ab000 0x001ab000 0x001000>, /* ap 53 */
|
|
<0x000ac000 0x001ac000 0x001000>, /* ap 54 */
|
|
<0x000ad000 0x001ad000 0x001000>, /* ap 55 */
|
|
<0x000ae000 0x001ae000 0x001000>, /* ap 56 */
|
|
<0x000af000 0x001af000 0x001000>, /* ap 57 */
|
|
<0x000b0000 0x001b0000 0x010000>, /* ap 58 */
|
|
<0x000c0000 0x001c0000 0x001000>, /* ap 59 */
|
|
<0x000cc000 0x001cc000 0x002000>, /* ap 60 */
|
|
<0x000ce000 0x001ce000 0x002000>, /* ap 61 */
|
|
<0x000d0000 0x001d0000 0x002000>, /* ap 62 */
|
|
<0x000d2000 0x001d2000 0x002000>, /* ap 63 */
|
|
<0x000d8000 0x001d8000 0x001000>, /* ap 64 */
|
|
<0x000d9000 0x001d9000 0x001000>, /* ap 65 */
|
|
<0x000a0000 0x001a0000 0x001000>, /* ap 79 */
|
|
<0x000a1000 0x001a1000 0x001000>, /* ap 80 */
|
|
<0x000a2000 0x001a2000 0x001000>, /* ap 81 */
|
|
<0x000a3000 0x001a3000 0x001000>, /* ap 82 */
|
|
<0x000a4000 0x001a4000 0x001000>, /* ap 83 */
|
|
<0x000a5000 0x001a5000 0x001000>; /* ap 84 */
|
|
|
|
target-module@8c000 { /* 0x4818c000, ap 42 04.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8c000 0x1000>;
|
|
};
|
|
|
|
target-module@8e000 { /* 0x4818e000, ap 44 0a.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x8e000 0x1000>;
|
|
};
|
|
|
|
target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x9c000 0x8>,
|
|
<0x9c010 0x8>,
|
|
<0x9c090 0x8>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x9c000 0x1000>;
|
|
};
|
|
|
|
target-module@a0000 { /* 0x481a0000, ap 79 24.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xa0000 0x4>,
|
|
<0xa0110 0x4>,
|
|
<0xa0114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa0000 0x1000>;
|
|
|
|
spi1: spi@0 {
|
|
compatible = "ti,omap4-mcspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x400>;
|
|
interrupts = <125>;
|
|
ti,spi-num-cs = <2>;
|
|
dmas = <&edma 42 0
|
|
&edma 43 0
|
|
&edma 44 0
|
|
&edma 45 0>;
|
|
dma-names = "tx0", "rx0", "tx1", "rx1";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@a2000 { /* 0x481a2000, ap 81 2e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa2000 0x1000>;
|
|
};
|
|
|
|
target-module@a4000 { /* 0x481a4000, ap 83 30.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa4000 0x1000>;
|
|
};
|
|
|
|
target-module@a6000 { /* 0x481a6000, ap 48 16.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xa6050 0x4>,
|
|
<0xa6054 0x4>,
|
|
<0xa6058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa6000 0x1000>;
|
|
|
|
uart3: serial@0 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <44>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@a8000 { /* 0x481a8000, ap 50 20.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xa8050 0x4>,
|
|
<0xa8054 0x4>,
|
|
<0xa8058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xa8000 0x1000>;
|
|
|
|
uart4: serial@0 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <45>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xaa050 0x4>,
|
|
<0xaa054 0x4>,
|
|
<0xaa058 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xaa000 0x1000>;
|
|
|
|
uart5: serial@0 {
|
|
compatible = "ti,am3352-uart", "ti,omap3-uart";
|
|
clock-frequency = <48000000>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@ac000 { /* 0x481ac000, ap 54 38.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xac000 0x4>,
|
|
<0xac010 0x4>,
|
|
<0xac114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
|
|
<&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xac000 0x1000>;
|
|
|
|
gpio2: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
gpio-ranges = <&am33xx_pinmux 0 34 18>,
|
|
<&am33xx_pinmux 18 77 4>,
|
|
<&am33xx_pinmux 22 56 10>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <32>;
|
|
};
|
|
};
|
|
|
|
target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xae000 0x4>,
|
|
<0xae010 0x4>,
|
|
<0xae114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
|
|
<&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
|
|
clock-names = "fck", "dbclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xae000 0x1000>;
|
|
|
|
gpio3: gpio@0 {
|
|
compatible = "ti,omap4-gpio";
|
|
gpio-ranges = <&am33xx_pinmux 0 66 5>,
|
|
<&am33xx_pinmux 5 98 2>,
|
|
<&am33xx_pinmux 7 75 2>,
|
|
<&am33xx_pinmux 13 141 1>,
|
|
<&am33xx_pinmux 14 100 8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <62>;
|
|
};
|
|
};
|
|
|
|
target-module@b0000 { /* 0x481b0000, ap 58 50.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xb0000 0x10000>;
|
|
};
|
|
|
|
target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xcc020 0x4>;
|
|
reg-names = "rev";
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
|
|
<&dcan0_fck>;
|
|
clock-names = "fck", "osc";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xcc000 0x2000>;
|
|
|
|
dcan0: can@0 {
|
|
compatible = "ti,am3352-d_can";
|
|
reg = <0x0 0x2000>;
|
|
clocks = <&dcan0_fck>;
|
|
clock-names = "fck";
|
|
syscon-raminit = <&scm_conf 0x644 0>;
|
|
interrupts = <52>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xd0020 0x4>;
|
|
reg-names = "rev";
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
|
|
<&dcan1_fck>;
|
|
clock-names = "fck", "osc";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xd0000 0x2000>;
|
|
|
|
dcan1: can@0 {
|
|
compatible = "ti,am3352-d_can";
|
|
reg = <0x0 0x2000>;
|
|
clocks = <&dcan1_fck>;
|
|
clock-names = "fck";
|
|
syscon-raminit = <&scm_conf 0x644 1>;
|
|
interrupts = <55>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@d8000 { /* 0x481d8000, ap 64 66.0 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0xd82fc 0x4>,
|
|
<0xd8110 0x4>,
|
|
<0xd8114 0x4>;
|
|
reg-names = "rev", "sysc", "syss";
|
|
ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
|
|
SYSC_OMAP2_ENAWAKEUP |
|
|
SYSC_OMAP2_SOFTRESET |
|
|
SYSC_OMAP2_AUTOIDLE)>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,syss-mask = <1>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xd8000 0x1000>;
|
|
};
|
|
};
|
|
|
|
segment@200000 { /* 0x48200000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
|
|
segment@300000 { /* 0x48300000 */
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */
|
|
<0x00001000 0x00301000 0x001000>, /* ap 67 */
|
|
<0x00002000 0x00302000 0x001000>, /* ap 68 */
|
|
<0x00003000 0x00303000 0x001000>, /* ap 69 */
|
|
<0x00004000 0x00304000 0x001000>, /* ap 70 */
|
|
<0x00005000 0x00305000 0x001000>, /* ap 71 */
|
|
<0x0000e000 0x0030e000 0x001000>, /* ap 72 */
|
|
<0x0000f000 0x0030f000 0x001000>, /* ap 73 */
|
|
<0x00018000 0x00318000 0x004000>, /* ap 74 */
|
|
<0x0001c000 0x0031c000 0x001000>, /* ap 75 */
|
|
<0x00010000 0x00310000 0x002000>, /* ap 76 */
|
|
<0x00012000 0x00312000 0x001000>, /* ap 93 */
|
|
<0x00015000 0x00315000 0x001000>, /* ap 94 */
|
|
<0x00016000 0x00316000 0x001000>, /* ap 95 */
|
|
<0x00017000 0x00317000 0x001000>, /* ap 96 */
|
|
<0x00013000 0x00313000 0x001000>, /* ap 97 */
|
|
<0x00014000 0x00314000 0x001000>, /* ap 98 */
|
|
<0x00020000 0x00320000 0x001000>, /* ap 99 */
|
|
<0x00021000 0x00321000 0x001000>, /* ap 100 */
|
|
<0x00022000 0x00322000 0x001000>, /* ap 101 */
|
|
<0x00023000 0x00323000 0x001000>, /* ap 102 */
|
|
<0x00024000 0x00324000 0x001000>, /* ap 103 */
|
|
<0x00025000 0x00325000 0x001000>; /* ap 104 */
|
|
|
|
target-module@0 { /* 0x48300000, ap 66 48.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x0 0x4>,
|
|
<0x4 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x1000>;
|
|
|
|
epwmss0: epwmss@0 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x0 0x10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0 0 0x1000>;
|
|
|
|
ecap0: ecap@100 {
|
|
compatible = "ti,am3352-ecap",
|
|
"ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x100 0x80>;
|
|
clocks = <&l4ls_gclk>;
|
|
clock-names = "fck";
|
|
interrupts = <31>;
|
|
interrupt-names = "ecap0";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehrpwm0: pwm@200 {
|
|
compatible = "ti,am3352-ehrpwm",
|
|
"ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x200 0x80>;
|
|
clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
|
|
clock-names = "tbclk", "fck";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@2000 { /* 0x48302000, ap 68 52.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x2000 0x4>,
|
|
<0x2004 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x2000 0x1000>;
|
|
|
|
epwmss1: epwmss@0 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x0 0x10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0 0 0x1000>;
|
|
|
|
ecap1: ecap@100 {
|
|
compatible = "ti,am3352-ecap",
|
|
"ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x100 0x80>;
|
|
clocks = <&l4ls_gclk>;
|
|
clock-names = "fck";
|
|
interrupts = <47>;
|
|
interrupt-names = "ecap1";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehrpwm1: pwm@200 {
|
|
compatible = "ti,am3352-ehrpwm",
|
|
"ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x200 0x80>;
|
|
clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
|
|
clock-names = "tbclk", "fck";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@4000 { /* 0x48304000, ap 70 44.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0x4000 0x4>,
|
|
<0x4004 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>,
|
|
<SYSC_IDLE_SMART_WKUP>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x4000 0x1000>;
|
|
|
|
epwmss2: epwmss@0 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x0 0x10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0 0 0x1000>;
|
|
|
|
ecap2: ecap@100 {
|
|
compatible = "ti,am3352-ecap",
|
|
"ti,am33xx-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x100 0x80>;
|
|
clocks = <&l4ls_gclk>;
|
|
clock-names = "fck";
|
|
interrupts = <61>;
|
|
interrupt-names = "ecap2";
|
|
status = "disabled";
|
|
};
|
|
|
|
ehrpwm2: pwm@200 {
|
|
compatible = "ti,am3352-ehrpwm",
|
|
"ti,am33xx-ehrpwm";
|
|
#pwm-cells = <3>;
|
|
reg = <0x200 0x80>;
|
|
clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
|
|
clock-names = "tbclk", "fck";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
target-module@e000 { /* 0x4830e000, ap 72 4a.0 */
|
|
compatible = "ti,sysc-omap4", "ti,sysc";
|
|
reg = <0xe000 0x4>,
|
|
<0xe054 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-midle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>,
|
|
<SYSC_IDLE_SMART>;
|
|
/* Domains (P, C): per_pwrdm, lcdc_clkdm */
|
|
clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0xe000 0x1000>;
|
|
|
|
lcdc: lcdc@0 {
|
|
compatible = "ti,am33xx-tilcdc";
|
|
reg = <0x0 0x1000>;
|
|
interrupts = <36>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
target-module@10000 { /* 0x48310000, ap 76 4e.1 */
|
|
compatible = "ti,sysc-omap2", "ti,sysc";
|
|
reg = <0x11fe0 0x4>,
|
|
<0x11fe4 0x4>;
|
|
reg-names = "rev", "sysc";
|
|
ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
|
|
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
|
|
<SYSC_IDLE_NO>;
|
|
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
|
|
clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
|
|
clock-names = "fck";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x10000 0x2000>;
|
|
|
|
rng: rng@0 {
|
|
compatible = "ti,omap4-rng";
|
|
reg = <0x0 0x2000>;
|
|
interrupts = <111>;
|
|
};
|
|
};
|
|
|
|
target-module@13000 { /* 0x48313000, ap 97 62.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x13000 0x1000>;
|
|
};
|
|
|
|
target-module@15000 { /* 0x48315000, ap 94 56.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0x00015000 0x00001000>,
|
|
<0x00001000 0x00016000 0x00001000>;
|
|
};
|
|
|
|
target-module@18000 { /* 0x48318000, ap 74 4c.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x18000 0x4000>;
|
|
};
|
|
|
|
target-module@20000 { /* 0x48320000, ap 99 34.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x20000 0x1000>;
|
|
};
|
|
|
|
target-module@22000 { /* 0x48322000, ap 101 3e.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x22000 0x1000>;
|
|
};
|
|
|
|
target-module@24000 { /* 0x48324000, ap 103 68.0 */
|
|
compatible = "ti,sysc";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x24000 0x1000>;
|
|
};
|
|
};
|
|
};
|