u-boot/drivers/pinctrl/nxp/pinctrl-imx.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

274 lines
6.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
*/
#include <common.h>
#include <malloc.h>
#include <mapmem.h>
#include <asm/global_data.h>
#include <dm/device_compat.h>
#include <dm/devres.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/err.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include "pinctrl-imx.h"
DECLARE_GLOBAL_DATA_PTR;
static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
struct imx_pinctrl_soc_info *info = priv->info;
int node = dev_of_offset(config);
const struct fdt_property *prop;
u32 *pin_data;
int npins, size, pin_size;
int mux_reg, conf_reg, input_reg;
u32 input_val, mux_mode, config_val;
u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0;
int i, j = 0;
dev_dbg(dev, "%s: %s\n", __func__, config->name);
if (info->flags & IMX8_USE_SCU)
pin_size = SHARE_IMX8_PIN_SIZE;
else if (info->flags & SHARE_MUX_CONF_REG)
pin_size = SHARE_FSL_PIN_SIZE;
else
pin_size = FSL_PIN_SIZE;
prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size);
if (!prop) {
dev_err(dev, "No fsl,pins property in node %s\n", config->name);
return -EINVAL;
}
if (!size || size % pin_size) {
dev_err(dev, "Invalid fsl,pins property in node %s\n",
config->name);
return -EINVAL;
}
pin_data = devm_kzalloc(dev, size, 0);
if (!pin_data)
return -ENOMEM;
if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
pin_data, size >> 2)) {
dev_err(dev, "Error reading pin data.\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
npins = size / pin_size;
if (info->flags & IMX8_USE_SCU) {
imx_pinctrl_scu_conf_pins(info, pin_data, npins);
} else {
/*
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
*/
for (i = 0; i < npins; i++) {
mux_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
mux_reg = -1;
if (info->flags & SHARE_MUX_CONF_REG) {
conf_reg = mux_reg;
} else {
conf_reg = pin_data[j++];
if (!(info->flags & ZERO_OFFSET_VALID) &&
!conf_reg)
conf_reg = -1;
}
if ((mux_reg == -1) || (conf_reg == -1)) {
dev_err(dev, "Error mux_reg or conf_reg\n");
devm_kfree(dev, pin_data);
return -EINVAL;
}
input_reg = pin_data[j++];
mux_mode = pin_data[j++];
input_val = pin_data[j++];
config_val = pin_data[j++];
dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, "
"input_reg 0x%x, mux_mode 0x%x, "
"input_val 0x%x, config_val 0x%x\n",
mux_reg, conf_reg, input_reg, mux_mode,
input_val, config_val);
if (config_val & IMX_PAD_SION)
mux_mode |= IOMUXC_CONFIG_SION;
config_val &= ~IMX_PAD_SION;
/* Set Mux */
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + mux_reg,
info->mux_mask,
mux_mode << mux_shift);
} else {
writel(mux_mode, info->base + mux_reg);
}
dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n",
mux_reg, mux_mode);
/*
* Set select input
*
* If the select input value begins with 0xff,
* it's a quirky select input and the value should
* be interpreted as below.
* 31 23 15 7 0
* | 0xff | shift | width | select |
* It's used to work around the problem that the
* select input for some pin is not implemented in
* the select input register but in some general
* purpose register. We encode the select input
* value, width and shift of the bit field into
* input_val cell of pin function ID in device tree,
* and then decode them here for setting up the select
* input bits in general purpose register.
*/
if (input_val >> 24 == 0xff) {
u32 val = input_val;
u8 select = val & 0xff;
u8 width = (val >> 8) & 0xff;
u8 shift = (val >> 16) & 0xff;
u32 mask = ((1 << width) - 1) << shift;
/*
* The input_reg[i] here is actually some
* IOMUXC general purpose register, not
* regular select input register.
*/
val = readl(info->base + input_reg);
val &= ~mask;
val |= select << shift;
writel(val, info->base + input_reg);
} else if (input_reg) {
/*
* Regular select input register can never be
* at offset 0, and we only print register
* value for regular case.
*/
if (info->input_sel_base)
writel(input_val,
info->input_sel_base +
input_reg);
else
writel(input_val,
info->base + input_reg);
dev_dbg(dev, "select_input: offset 0x%x val "
"0x%x\n", input_reg, input_val);
}
/* Set config */
if (!(config_val & IMX_NO_PAD_CTL)) {
if (info->flags & SHARE_MUX_CONF_REG) {
clrsetbits_le32(info->base + conf_reg,
~info->mux_mask,
config_val);
} else {
writel(config_val,
info->base + conf_reg);
}
dev_dbg(dev, "write config: offset 0x%x val "
"0x%x\n", conf_reg, config_val);
}
}
}
devm_kfree(dev, pin_data);
return 0;
}
const struct pinctrl_ops imx_pinctrl_ops = {
.set_state = imx_pinctrl_set_state,
};
int imx_pinctrl_probe(struct udevice *dev,
struct imx_pinctrl_soc_info *info)
{
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
int node = dev_of_offset(dev), ret;
struct fdtdec_phandle_args arg;
fdt_addr_t addr;
fdt_size_t size;
if (!info) {
dev_err(dev, "wrong pinctrl info\n");
return -EINVAL;
}
priv->dev = dev;
priv->info = info;
if (info->flags & IMX8_USE_SCU)
return 0;
addr = devfdt_get_addr_size_index(dev, 0, &size);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
info->base = map_sysmem(addr, size);
if (!info->base)
return -ENOMEM;
priv->info = info;
info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0);
/*
* Refer to linux documentation for details:
* Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
*/
if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) {
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob,
node, "fsl,input-sel",
NULL, 0, 0, &arg);
if (ret) {
dev_err(dev, "iomuxc fsl,input-sel property not found\n");
return -EINVAL;
}
addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg",
&size);
if (addr == FDT_ADDR_T_NONE)
return -EINVAL;
info->input_sel_base = map_sysmem(addr, size);
if (!info->input_sel_base)
return -ENOMEM;
}
dev_dbg(dev, "initialized IMX pinctrl driver\n");
return 0;
}
int imx_pinctrl_remove(struct udevice *dev)
{
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
struct imx_pinctrl_soc_info *info = priv->info;
if (info->flags & IMX8_USE_SCU)
return 0;
if (info->input_sel_base)
unmap_sysmem(info->input_sel_base);
if (info->base)
unmap_sysmem(info->base);
return 0;
}