u-boot/arch/riscv
Rick Chen d58717e425 riscv: ae250: Support DT provided by the board at runtime
Enable CONFIG_OF_BOAD to support delivery dtb to u-boot
at run time instead of embedded.

There are two methods to delivery dtb.
 1 Pass from loader:
   When u-boot boot from RAM, gdb or loader can pass dtb
   via a2 to u-boot dynamically. Of course gdb or loader
   shall be in charge of dtb delivery.

 2 Configure CONFIG_SYS_FDT_BASE:
   It can be configured as RAM or ROM base statically,
   no mater u-boot boot from RAM or ROM.
   If it was configured as ROM base, dtb can be burned
   into ROM(spi flash) by spi driver.

Meanwhile remove CONFIG_SKIP_LOWLEVEL_INIT which is
useless in nx25-ae250 configuration.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
2018-03-30 13:13:56 +08:00
..
cpu/nx25 riscv: ae250: Support DT provided by the board at runtime 2018-03-30 13:13:56 +08:00
dts riscv: dts: AE250 support sd High-Speed mode 2018-03-30 13:13:34 +08:00
include/asm riscv: bootm: Remove ATAGS 2018-03-30 13:13:29 +08:00
lib riscv: bootm: Remove ATAGS 2018-03-30 13:13:29 +08:00
config.mk riscv: Add Kconfig to support RISC-V 2018-01-12 08:05:12 -05:00
Kconfig riscv: Add Kconfig to support RISC-V 2018-01-12 08:05:12 -05:00
Makefile riscv: Add Kconfig to support RISC-V 2018-01-12 08:05:12 -05:00