mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 07:01:24 +00:00
ce2f2d2ae7
The primary benefit of this change is that it adds all missing clocks and resets properties to peripherals. This will allow peripheral drivers to migrate to the standard clock and reset APIs in the future. Main changes: * Modification of PCIe memory region addresses. The HW memory layout is programmable, so this should work fine, and Beaver PCIe was tested without issue. * Removal of pcie_xclk from the PCIe node and clock binding header. This clock doesn't exist and isn't used; only a reset with this ID exists. * Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use DMA so isn't affected. * Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all information required by U-Boot, so U-Boot is not affected. * Changed the phy_type value for the second USB port. This required board DTs to be updated to keep the same configuration. * Boards need to define the clk32k_in clock that feeds the Tegra PMC. * Addition of tegra30-mc.h since tegra30.dtsi now includes it. * Conversion of many magic numbers to named defines. * Addition of many nodes not used by U-Boot. * Node sort order fixes. Remaining deltas relative to the Linux DT: * None. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
86 lines
1.4 KiB
Text
86 lines
1.4 KiB
Text
#include "tegra30.dtsi"
|
|
|
|
/ {
|
|
model = "Avionic Design Tamonten NG";
|
|
compatible = "ad,tamonten-ng", "nvidia,tegra30";
|
|
|
|
memory {
|
|
reg = <0x80000000 0x40000000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uartd;
|
|
};
|
|
|
|
aliases {
|
|
i2c0 = "/i2c@7000c000";
|
|
i2c1 = "/i2c@7000c700";
|
|
i2c2 = "/i2c@7000c400";
|
|
i2c3 = "/i2c@7000c500";
|
|
i2c4 = "/i2c@7000d000";
|
|
mmc0 = "/sdhci@78000600";
|
|
mmc1 = "/sdhci@78000400";
|
|
mmc2 = "/sdhci@78000000";
|
|
usb0 = "/usb@7d008000";
|
|
};
|
|
|
|
/* GEN1 */
|
|
i2c@7000c000 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* GEN2 */
|
|
i2c@7000c400 {
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* CAM */
|
|
i2c@7000c500 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* DDC */
|
|
i2c@7000c700 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* PWR */
|
|
i2c@7000d000 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* SD slot on the base board */
|
|
sdhci@78000400 {
|
|
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio TEGRA_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
|
|
bus-width = <4>;
|
|
};
|
|
|
|
/* EMMC on the COM module */
|
|
sdhci@78000600 {
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
non-removable;
|
|
};
|
|
|
|
usb@7d008000 {
|
|
status = "okay";
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
clk32k_in: clk@0 {
|
|
compatible = "fixed-clock";
|
|
reg=<0>;
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
};
|