mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-15 01:17:39 +00:00
e4b5143eb6
Function enable_layerscape_ns_access() is alreayd called soc-wide. Remove duplicated calling from individual boards. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [YS: Add commit message] Reviewed-by: York Sun <york.sun@nxp.com> |
||
|---|---|---|
| .. | ||
| ddr.c | ||
| ddr.h | ||
| eth.c | ||
| Kconfig | ||
| ls1046aqds.c | ||
| ls1046aqds_pbi.cfg | ||
| ls1046aqds_qixis.h | ||
| ls1046aqds_rcw_nand.cfg | ||
| ls1046aqds_rcw_sd_ifc.cfg | ||
| ls1046aqds_rcw_sd_qspi.cfg | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Overview
--------
The LS1046A Development System (QDS) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1046A
LayerScape Architecture processor. The LS1046AQDS provides SW development
platform for the Freescale LS1046A processor series, with a complete
debugging environment.
LS1046A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
SoC overview.
LS1046AQDS board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
- PCI Express - 3.0
- SGMII, SGMII 2.5
- QSGMII
- SATA 3.0
- XFI
- DDR Controller
- 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
-IFC/Local Bus
- One in-socket 128 MB NOR flash 16-bit data bus
- One 512 MB NAND flash with ECC support
- PromJet Port
- FPGA connection
- USB 3.0
- Three high speed USB 3.0 ports
- First USB 3.0 port configured as Host with Type-A connector
- The other two USB 3.0 ports configured as OTG with micro-AB connector
- SDHC port connects directly to an adapter card slot, featuring:
- Optional clock feedback paths, and optional high-speed voltage translation assistance
- SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
- eMMC memory devices
- DSPI: Onboard support for three SPI flash memory devices
- 4 I2C controllers
- One SATA onboard connectors
- UART
- Two 4-pin serial ports at up to 115.2 Kbit/s
- Two DB9 D-Type connectors supporting one Serial port each
- ARM JTAG support
Memory map from core's view
----------------------------
Start Address End Address Description Size
0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
0x00_6000_0000 - 0x00_67FF_FFFF IFC - NOR Flash 128MB
0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - FPGA 4KB
0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
Booting Options
---------------
a) Promjet Boot
b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot