mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-20 22:52:00 +00:00
de19baef68
Add support for new home automation devices. JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features: - DIN Rail Mounting case - Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 512Mb/1GB DDR3 - 8/16GB eMMC flash - 1 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - 2 x gpio LEDS - GPIO user Button - 1 x 1-Wire - 2 x RS-485 - 4 x dry contact digital GPIO inputs - 3 x relay GPIO outputs - DC source with a voltage of 9 to 56 V / Passive POE JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features: - Square plastic case - Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz - no video out - 1GB DDR3 - 8/16GB eMMC flash - 2 x USB 2.0 - 1 x 10/100Mbps ethernet - WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0. - TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support. - MicroSD 2.x/3.x/4.x DS/HS cards. - 1 x gpio LED - ADC user Button - DC source 5V microUSB with serial console Patches from: - JetHub H1 https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607 - JetHub D1 https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79 Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed unused variable value] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
71 lines
1.7 KiB
Text
71 lines
1.7 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_SYS_BOARD="jethub-j80"
|
|
CONFIG_SYS_CONFIG_NAME="jethub"
|
|
CONFIG_ARCH_MESON=y
|
|
CONFIG_SYS_TEXT_BASE=0x01000000
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_ENV_SIZE=0x2000
|
|
CONFIG_DM_GPIO=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="meson-gxl-s905w-jethome-jethub-j80"
|
|
CONFIG_MESON_GXL=y
|
|
CONFIG_DEBUG_UART_BASE=0xc81004c0
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_IDENT_STRING=" jethubj80"
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_SYS_LOAD_ADDR=0x01000000
|
|
CONFIG_OF_BOARD_SETUP=y
|
|
CONFIG_CONSOLE_MUX=y
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_MISC_INIT_R=y
|
|
# CONFIG_CMD_BDI is not set
|
|
# CONFIG_CMD_IMI is not set
|
|
CONFIG_CMD_EEPROM=y
|
|
CONFIG_CMD_ADC=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_RANDOM_UUID=y
|
|
CONFIG_CMD_I2C=y
|
|
# CONFIG_CMD_LOADS is not set
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
CONFIG_CMD_RTC=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
CONFIG_PARTITION_TYPE_GUID=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_SARADC_MESON=y
|
|
CONFIG_DM_I2C=y
|
|
CONFIG_SYS_I2C_MESON=y
|
|
CONFIG_MMC_MESON_GX=y
|
|
CONFIG_MTD_UBI=y
|
|
CONFIG_PHY_MESON_GXL=y
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_DM_MDIO=y
|
|
CONFIG_DM_MDIO_MUX=y
|
|
CONFIG_ETH_DESIGNWARE_MESON8B=y
|
|
CONFIG_MDIO_MUX_MMIOREG=y
|
|
CONFIG_MESON_GXL_USB_PHY=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_MESON_GXL=y
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_DM_RTC=y
|
|
CONFIG_RTC_PCF8563=y
|
|
CONFIG_DEBUG_UART_ANNOUNCE=y
|
|
CONFIG_DEBUG_UART_SKIP_INIT=y
|
|
CONFIG_MESON_SERIAL=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_DWC2=y
|
|
CONFIG_USB_DWC3=y
|
|
# CONFIG_USB_DWC3_GADGET is not set
|
|
CONFIG_USB_DWC3_MESON_GXL=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xfada
|
|
CONFIG_USB_GADGET_DWC2_OTG=y
|
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
|
CONFIG_OF_LIBFDT_OVERLAY=y
|