mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 10:48:51 +00:00
f85a8e8d1d
Delete CONFIG_SKIP_LOWLEVEL_INIT define in ls1021atwr.h and ls1021aqds.h can let it run cpu_init_cp15 to enable i-cache. First stage of u-boot can run faster after that. There is a description about skip lowlevel init in board/freescale/ls1021atwr/README. Signed-off-by: Xiaoliang Yang <xiaoliang.yang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
161 lines
4.3 KiB
C
161 lines
4.3 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
#include <asm/arch/immap_ls102xa.h>
|
|
#include <asm/arch/ls102xa_soc.h>
|
|
#include <asm/arch/ls102xa_stream_id.h>
|
|
#include <fsl_csu.h>
|
|
|
|
struct liodn_id_table sec_liodn_tbl[] = {
|
|
SET_SEC_JR_LIODN_ENTRY(0, 0x10, 0x10),
|
|
SET_SEC_JR_LIODN_ENTRY(1, 0x10, 0x10),
|
|
SET_SEC_JR_LIODN_ENTRY(2, 0x10, 0x10),
|
|
SET_SEC_JR_LIODN_ENTRY(3, 0x10, 0x10),
|
|
SET_SEC_RTIC_LIODN_ENTRY(a, 0x10),
|
|
SET_SEC_RTIC_LIODN_ENTRY(b, 0x10),
|
|
SET_SEC_RTIC_LIODN_ENTRY(c, 0x10),
|
|
SET_SEC_RTIC_LIODN_ENTRY(d, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(0, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(1, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(2, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(3, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(4, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(5, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(6, 0x10, 0x10),
|
|
SET_SEC_DECO_LIODN_ENTRY(7, 0x10, 0x10),
|
|
};
|
|
|
|
struct smmu_stream_id dev_stream_id[] = {
|
|
{ 0x100, 0x01, "ETSEC MAC1" },
|
|
{ 0x104, 0x02, "ETSEC MAC2" },
|
|
{ 0x108, 0x03, "ETSEC MAC3" },
|
|
{ 0x10c, 0x04, "PEX1" },
|
|
{ 0x110, 0x05, "PEX2" },
|
|
{ 0x114, 0x06, "qDMA" },
|
|
{ 0x118, 0x07, "SATA" },
|
|
{ 0x11c, 0x08, "USB3" },
|
|
{ 0x120, 0x09, "QE" },
|
|
{ 0x124, 0x0a, "eSDHC" },
|
|
{ 0x128, 0x0b, "eMA" },
|
|
{ 0x14c, 0x0c, "2D-ACE" },
|
|
{ 0x150, 0x0d, "USB2" },
|
|
{ 0x18c, 0x0e, "DEBUG" },
|
|
};
|
|
|
|
unsigned int get_soc_major_rev(void)
|
|
{
|
|
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
unsigned int svr, major;
|
|
|
|
svr = in_be32(&gur->svr);
|
|
major = SVR_MAJ(svr);
|
|
|
|
return major;
|
|
}
|
|
|
|
void s_init(void)
|
|
{
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
|
|
void erratum_a010315(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = PCIE1; i <= PCIE2; i++)
|
|
if (!is_serdes_configured(i)) {
|
|
debug("PCIe%d: disabled all R/W permission!\n", i);
|
|
set_pcie_ns_access(i, 0);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
int arch_soc_init(void)
|
|
{
|
|
struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
|
|
struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR;
|
|
unsigned int major;
|
|
|
|
#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
|
|
enable_layerscape_ns_access();
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_QSPI
|
|
out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_DCU_FB
|
|
out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
|
|
#endif
|
|
|
|
/* Configure Little endian for SAI, ASRC and SPDIF */
|
|
out_be32(&scfg->endiancr, SCFG_ENDIANCR_LE);
|
|
|
|
/*
|
|
* Enable snoop requests and DVM message requests for
|
|
* All the slave insterfaces.
|
|
*/
|
|
out_le32(&cci->slave[0].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
out_le32(&cci->slave[1].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
out_le32(&cci->slave[2].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
out_le32(&cci->slave[4].snoop_ctrl,
|
|
CCI400_DVM_MESSAGE_REQ_EN | CCI400_SNOOP_REQ_EN);
|
|
|
|
major = get_soc_major_rev();
|
|
if (major == SOC_MAJOR_VER_1_0) {
|
|
/*
|
|
* Set CCI-400 Slave interface S1, S2 Shareable Override
|
|
* Register All transactions are treated as non-shareable
|
|
*/
|
|
out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
|
|
out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE);
|
|
|
|
/* Workaround for the issue that DDR could not respond to
|
|
* barrier transaction which is generated by executing DSB/ISB
|
|
* instruction. Set CCI-400 control override register to
|
|
* terminate the barrier transaction. After DDR is initialized,
|
|
* allow barrier transaction to DDR again */
|
|
out_le32(&cci->ctrl_ord, CCI400_CTRLORD_TERM_BARRIER);
|
|
}
|
|
|
|
/* Enable all the snoop signal for various masters */
|
|
out_be32(&scfg->snpcnfgcr, SCFG_SNPCNFGCR_SEC_RD_WR |
|
|
SCFG_SNPCNFGCR_DCU_RD_WR |
|
|
SCFG_SNPCNFGCR_SATA_RD_WR |
|
|
SCFG_SNPCNFGCR_USB3_RD_WR |
|
|
SCFG_SNPCNFGCR_DBG_RD_WR |
|
|
SCFG_SNPCNFGCR_EDMA_SNP);
|
|
|
|
/*
|
|
* Memory controller require a register write before being enabled.
|
|
* Affects: DDR
|
|
* Register: EDDRTQCFG
|
|
* Description: Memory controller performance is not optimal with
|
|
* default internal target queue register values.
|
|
* Workaround: Write a value of 63b2_0042h to address: 157_020Ch.
|
|
*/
|
|
out_be32(&scfg->eddrtqcfg, 0x63b20042);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ls102xa_smmu_stream_id_init(void)
|
|
{
|
|
ls1021x_config_caam_stream_id(sec_liodn_tbl,
|
|
ARRAY_SIZE(sec_liodn_tbl));
|
|
|
|
ls102xa_config_smmu_stream_id(dev_stream_id,
|
|
ARRAY_SIZE(dev_stream_id));
|
|
|
|
return 0;
|
|
}
|