u-boot/include/configs/seaboard.h
Simon Glass b0e6ef4640 dm: i2c: tegra: Convert to driver model
This converts all Tegra boards over to use driver model for I2C. The driver
is adjusted to use driver model and the following obsolete CONFIGs are
removed:

   - CONFIG_SYS_I2C_INIT_BOARD
   - CONFIG_I2C_MULTI_BUS
   - CONFIG_SYS_MAX_I2C_BUS
   - CONFIG_SYS_I2C_SPEED
   - CONFIG_SYS_I2C

This has been tested on:
- trimslice (no I2C)
- beaver
- Jetson-TK1

It has not been tested on Tegra 114 as I don't have that board.

Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
2014-12-11 13:18:44 -07:00

93 lines
2.1 KiB
C

/*
* (C) Copyright 2010,2011
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <linux/sizes.h>
/* LP0 suspend / resume */
#define CONFIG_TEGRA_LP0
#define CONFIG_AES
#define CONFIG_TEGRA_PMU
#define CONFIG_TPS6586X_POWER
#define CONFIG_TEGRA_CLOCK_SCALING
#include "tegra20-common.h"
/* High-level configuration options */
#define V_PROMPT "Tegra20 (SeaBoard) # "
#define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard"
/* Board-specific serial config */
#define CONFIG_TEGRA_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
#define CONFIG_UART_DISABLE_GPIO GPIO_PI3
#define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */
/* I2C */
#define CONFIG_SYS_I2C_TEGRA
#define CONFIG_CMD_I2C
/* SD/MMC */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_TEGRA_MMC
#define CONFIG_CMD_MMC
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 2
/* USB Host support */
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_TEGRA
#define CONFIG_USB_STORAGE
#define CONFIG_CMD_USB
/* USB networking support */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
/* General networking support */
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
/* Enable keyboard */
#define CONFIG_TEGRA_KEYBOARD
#define CONFIG_KEYBOARD
/* USB keyboard */
#define CONFIG_USB_KEYBOARD
/* LCD support */
#define CONFIG_LCD
#define CONFIG_PWM_TEGRA
#define CONFIG_VIDEO_TEGRA
#define LCD_BPP LCD_COLOR16
#define CONFIG_SYS_WHITE_ON_BLACK
#define CONFIG_CONSOLE_SCROLL_LINES 10
/* NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_TEGRA_NAND
/* Max number of NAND devices */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#include "tegra-common-post.h"
#endif /* __CONFIG_H */