mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
133 lines
4.3 KiB
C
133 lines
4.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Configuation settings for the Renesas Technology R0P7785LC0011RL board
|
|
*
|
|
* Copyright (C) 2008 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
|
|
*/
|
|
|
|
#ifndef __SH7785LCR_H
|
|
#define __SH7785LCR_H
|
|
|
|
#define CONFIG_CPU_SH7785 1
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"bootdevice=0:1\0" \
|
|
"usbload=usb reset;usbboot;usb stop;bootm\0"
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
#undef CONFIG_SHOW_BOOT_PROGRESS
|
|
|
|
/* MEMORY */
|
|
#if defined(CONFIG_SH_32BIT)
|
|
/* 0x40000000 - 0x47FFFFFF does not use */
|
|
#define CONFIG_SH_SDRAM_OFFSET (0x8000000)
|
|
#define SH7785LCR_SDRAM_PHYS_BASE (0x40000000 + CONFIG_SH_SDRAM_OFFSET)
|
|
#define SH7785LCR_SDRAM_BASE (0x80000000 + CONFIG_SH_SDRAM_OFFSET)
|
|
#define SH7785LCR_SDRAM_SIZE (384 * 1024 * 1024)
|
|
#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
|
|
#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
|
|
#define SH7785LCR_USB_BASE (0xa6000000)
|
|
#else
|
|
#define SH7785LCR_SDRAM_BASE (0x08000000)
|
|
#define SH7785LCR_SDRAM_SIZE (128 * 1024 * 1024)
|
|
#define SH7785LCR_FLASH_BASE_1 (0xa0000000)
|
|
#define SH7785LCR_FLASH_BANK_SIZE (64 * 1024 * 1024)
|
|
#define SH7785LCR_USB_BASE (0xb4000000)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PBSIZE 256
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
|
|
|
|
/* SCIF */
|
|
#define CONFIG_CONS_SCIF1 1
|
|
#define CONFIG_SCIF_EXT_CLOCK 1
|
|
|
|
#define CONFIG_SYS_MEMTEST_START (SH7785LCR_SDRAM_BASE)
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
|
|
(SH7785LCR_SDRAM_SIZE) - \
|
|
4 * 1024 * 1024)
|
|
#undef CONFIG_SYS_MEMTEST_SCRATCH
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE (SH7785LCR_SDRAM_BASE)
|
|
#define CONFIG_SYS_SDRAM_SIZE (SH7785LCR_SDRAM_SIZE)
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 * 1024)
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE (SH7785LCR_FLASH_BASE_1)
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
|
|
|
|
/* FLASH */
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#undef CONFIG_SYS_FLASH_QUIET_TEST
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_BASE (SH7785LCR_FLASH_BASE_1)
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE + \
|
|
(0 * SH7785LCR_FLASH_BANK_SIZE) }
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
|
|
#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
|
|
#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
|
|
|
|
#undef CONFIG_SYS_FLASH_PROTECTION
|
|
#undef CONFIG_SYS_DIRECT_FLASH_TFTP
|
|
|
|
/* R8A66597 */
|
|
#define CONFIG_USB_R8A66597_HCD
|
|
#define CONFIG_R8A66597_BASE_ADDR SH7785LCR_USB_BASE
|
|
#define CONFIG_R8A66597_XTAL 0x0000 /* 12MHz */
|
|
#define CONFIG_R8A66597_LDRV 0x8000 /* 3.3V */
|
|
#define CONFIG_R8A66597_ENDIAN 0x0000 /* little */
|
|
|
|
/* PCI Controller */
|
|
#define CONFIG_SH4_PCI
|
|
#define CONFIG_SH7780_PCI
|
|
#if defined(CONFIG_SH_32BIT)
|
|
#define CONFIG_SH7780_PCI_LSR 0x1ff00001
|
|
#define CONFIG_SH7780_PCI_LAR 0x5f000000
|
|
#define CONFIG_SH7780_PCI_BAR 0x5f000000
|
|
#else
|
|
#define CONFIG_SH7780_PCI_LSR 0x07f00001
|
|
#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE
|
|
#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE
|
|
#endif
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
|
|
|
|
#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
|
|
|
|
#if defined(CONFIG_SH_32BIT)
|
|
#define CONFIG_PCI_SYS_PHYS SH7785LCR_SDRAM_PHYS_BASE
|
|
#else
|
|
#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
|
|
#endif
|
|
#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
|
|
|
|
/* ENV setting */
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
#define CONFIG_ENV_SECT_SIZE (256 * 1024)
|
|
#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
|
|
|
|
/* Board Clock */
|
|
/* The SCIF used external clock. system clock only used timer. */
|
|
#define CONFIG_SYS_CLK_FREQ 50000000
|
|
#define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
|
|
#define CONFIG_SYS_TMU_CLK_DIV 4
|
|
|
|
#endif /* __SH7785LCR_H */
|