mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-06 13:14:27 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
164 lines
6.7 KiB
C
164 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ti816x_emif4.c
|
|
*
|
|
* TI816x emif4 configuration file
|
|
*
|
|
* Copyright (C) 2017, Konsulko Group
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
#include <asm/emif.h>
|
|
|
|
/*********************************************************************
|
|
* Init DDR3 on TI816X EVM
|
|
*********************************************************************/
|
|
static void ddr_init_settings(const struct cmd_control *ctrl, int emif)
|
|
{
|
|
/*
|
|
* setup use_rank_delays to 1. This is only necessary when
|
|
* multiple ranks are in use. Though the EVM does not have
|
|
* multiple ranks, this is a good value to set.
|
|
*/
|
|
writel(1, DDRPHY_CONFIG_BASE + 0x134); // DATA0_REG_PHY_USE_RANK0_DELAYS
|
|
writel(1, DDRPHY_CONFIG_BASE + 0x1d8); // DATA1_REG_PHY_USE_RANK0_DELAYS
|
|
writel(1, DDRPHY_CONFIG_BASE + 0x27c); // DATA2_REG_PHY_USE_RANK0_DELAYS
|
|
writel(1, DDRPHY_CONFIG_BASE + 0x320); // DATA3_REG_PHY_USE_RANK0_DELAYS
|
|
|
|
config_cmd_ctrl(ctrl, emif);
|
|
|
|
/* for ddr3 this needs to be set to 1 */
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x0F8); /* init mode */
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x104);
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x19C);
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x1A8);
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x240);
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x24C);
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x2E4);
|
|
writel(0x1, DDRPHY_CONFIG_BASE + 0x2F0);
|
|
|
|
/*
|
|
* This represents the initial value for the leveling process. The
|
|
* value is a ratio - so 0x100 represents one cycle. The real delay
|
|
* is determined through the leveling process.
|
|
*
|
|
* During the leveling process, 0x20 is subtracted from the value, so
|
|
* we have added that to the value we want to set. We also set the
|
|
* values such that byte3 completes leveling after byte2 and byte1
|
|
* after byte0.
|
|
*/
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0F0); /* data0 writelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x0F4); /* */
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x194); /* data1 writelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x198); /* */
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x238); /* data2 writelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x23c); /* */
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2dc); /* data3 writelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x2e0); /* */
|
|
|
|
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x0FC); /* data0 gatelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x100);
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x1A0); /* data1 gatelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x1A4);
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x244); /* data2 gatelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x248);
|
|
writel((0x20 << 10) | 0x20, DDRPHY_CONFIG_BASE + 0x2E8); /* data3 gatelvl init ratio */
|
|
writel(0x0, DDRPHY_CONFIG_BASE + 0x2EC);
|
|
|
|
writel(0x5, DDRPHY_CONFIG_BASE + 0x00C); /* cmd0 io config - output impedance of pad */
|
|
writel(0x5, DDRPHY_CONFIG_BASE + 0x010); /* cmd0 io clk config - output impedance of pad */
|
|
writel(0x5, DDRPHY_CONFIG_BASE + 0x040); /* cmd1 io config - output impedance of pad */
|
|
writel(0x5, DDRPHY_CONFIG_BASE + 0x044); /* cmd1 io clk config - output impedance of pad */
|
|
writel(0x5, DDRPHY_CONFIG_BASE + 0x074); /* cmd2 io config - output impedance of pad */
|
|
writel(0x5, DDRPHY_CONFIG_BASE + 0x078); /* cmd2 io clk config - output impedance of pad */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x0A8); /* data0 io config - output impedance of pad */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x0AC); /* data0 io clk config - output impedance of pad */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x14C); /* data1 io config - output impedance of pa */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x150); /* data1 io clk config - output impedance of pad */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x1F0); /* data2 io config - output impedance of pa */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x1F4); /* data2 io clk config - output impedance of pad */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x294); /* data3 io config - output impedance of pa */
|
|
writel(0x4, DDRPHY_CONFIG_BASE + 0x298); /* data3 io clk config - output impedance of pad */
|
|
}
|
|
|
|
static void ddr3_sw_levelling(const struct ddr_data *data, int emif)
|
|
{
|
|
/* Set the correct value to DDR_VTP_CTRL_0 */
|
|
writel(0x6, (DDRPHY_CONFIG_BASE + 0x358));
|
|
|
|
writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x108));
|
|
writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x1AC));
|
|
writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x250));
|
|
writel(data->datafwsratio0, (DDRPHY_CONFIG_BASE + 0x2F4));
|
|
|
|
writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x0DC));
|
|
writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x180));
|
|
writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x224));
|
|
writel(data->datawdsratio0, (DDRPHY_CONFIG_BASE + 0x2C8));
|
|
|
|
writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x120));
|
|
writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x1C4));
|
|
writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x268));
|
|
writel(data->datawrsratio0, (DDRPHY_CONFIG_BASE + 0x30C));
|
|
|
|
writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x0C8));
|
|
writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x16C));
|
|
writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x210));
|
|
writel(data->datardsratio0, (DDRPHY_CONFIG_BASE + 0x2B4));
|
|
}
|
|
|
|
static struct dmm_lisa_map_regs *hw_lisa_map_regs =
|
|
(struct dmm_lisa_map_regs *)DMM_BASE;
|
|
|
|
#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420)
|
|
void config_dmm(const struct dmm_lisa_map_regs *regs)
|
|
{
|
|
writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
|
|
writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
|
|
writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
|
|
writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
|
|
|
|
writel(regs->dmm_lisa_map_3, &hw_lisa_map_regs->dmm_lisa_map_3);
|
|
writel(regs->dmm_lisa_map_2, &hw_lisa_map_regs->dmm_lisa_map_2);
|
|
writel(regs->dmm_lisa_map_1, &hw_lisa_map_regs->dmm_lisa_map_1);
|
|
writel(regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0);
|
|
|
|
/* Enable Tiled Access */
|
|
writel(0x80000000, DMM_PAT_BASE_ADDR);
|
|
}
|
|
|
|
void config_ddr(const struct ddr_data *data, const struct cmd_control *ctrl,
|
|
const struct emif_regs *regs,
|
|
const struct dmm_lisa_map_regs *lisa_regs, int nrs)
|
|
{
|
|
int i;
|
|
|
|
enable_emif_clocks();
|
|
|
|
for (i = 0; i < nrs; i++)
|
|
ddr_init_settings(ctrl, i);
|
|
|
|
enable_dmm_clocks();
|
|
|
|
/* Program the DMM to for non-interleaved configuration */
|
|
config_dmm(lisa_regs);
|
|
|
|
/* Program EMIF CFG Registers */
|
|
for (i = 0; i < nrs; i++) {
|
|
set_sdram_timings(regs, i);
|
|
config_sdram(regs, i);
|
|
}
|
|
|
|
udelay(1000);
|
|
for (i = 0; i < nrs; i++)
|
|
ddr3_sw_levelling(data, i);
|
|
|
|
udelay(50000); /* Some delay needed */
|
|
}
|