mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
8ee54672df
When a pin is muxed to a peripheral or as a GPIO, the only configuration that can be set is the pullup. It is too restrictive so this patch allows to give a full configuration. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
86 lines
3.1 KiB
C
86 lines
3.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2015 Atmel Corporation.
|
|
* Wenyou Yang <wenyou.yang@atmel.com>
|
|
*/
|
|
|
|
#ifndef __ATMEL_PIO4_H
|
|
#define __ATMEL_PIO4_H
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
struct atmel_pio4_port {
|
|
u32 mskr; /* 0x00 PIO Mask Register */
|
|
u32 cfgr; /* 0x04 PIO Configuration Register */
|
|
u32 pdsr; /* 0x08 PIO Pin Data Status Register */
|
|
u32 locksr; /* 0x0C PIO Lock Status Register */
|
|
u32 sodr; /* 0x10 PIO Set Output Data Register */
|
|
u32 codr; /* 0x14 PIO Clear Output Data Register */
|
|
u32 odsr; /* 0x18 PIO Output Data Status Register */
|
|
u32 reserved0;
|
|
u32 ier; /* 0x20 PIO Interrupt Enable Register */
|
|
u32 idr; /* 0x24 PIO Interrupt Disable Register */
|
|
u32 imr; /* 0x28 PIO Interrupt Mask Register */
|
|
u32 isr; /* 0x2C PIO Interrupt Status Register */
|
|
u32 reserved1[3];
|
|
u32 iofr; /* 0x3C PIO I/O Freeze Register */
|
|
};
|
|
|
|
#endif
|
|
|
|
/*
|
|
* PIO Configuration Register Fields
|
|
*/
|
|
#define ATMEL_PIO_CFGR_FUNC_MASK GENMASK(2, 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_GPIO (0x0 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_A (0x1 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_B (0x2 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_C (0x3 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_D (0x4 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_E (0x5 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_F (0x6 << 0)
|
|
#define ATMEL_PIO_CFGR_FUNC_PERIPH_G (0x7 << 0)
|
|
#define ATMEL_PIO_DIR_MASK BIT(8)
|
|
#define ATMEL_PIO_PUEN_MASK BIT(9)
|
|
#define ATMEL_PIO_PDEN_MASK BIT(10)
|
|
#define ATMEL_PIO_IFEN_MASK BIT(12)
|
|
#define ATMEL_PIO_IFSCEN_MASK BIT(13)
|
|
#define ATMEL_PIO_OPD_MASK BIT(14)
|
|
#define ATMEL_PIO_SCHMITT_MASK BIT(15)
|
|
#define ATMEL_PIO_DRVSTR_MASK GENMASK(17, 16)
|
|
#define ATMEL_PIO_DRVSTR_LO (1 << 16)
|
|
#define ATMEL_PIO_DRVSTR_ME (2 << 16)
|
|
#define ATMEL_PIO_DRVSTR_HI (3 << 16)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_MASK GENMASK(26, 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_FALLING (0 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_RISING (1 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_BOTH (2 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_LOW (3 << 24)
|
|
#define ATMEL_PIO_CFGR_EVTSEL_HIGH (4 << 24)
|
|
|
|
#define ATMEL_PIO_NPINS_PER_BANK 32
|
|
#define ATMEL_PIO_BANK(pin_id) (pin_id / ATMEL_PIO_NPINS_PER_BANK)
|
|
#define ATMEL_PIO_LINE(pin_id) (pin_id % ATMEL_PIO_NPINS_PER_BANK)
|
|
#define ATMEL_PIO_BANK_OFFSET 0x40
|
|
|
|
#define ATMEL_GET_PIN_NO(pinfunc) ((pinfunc) & 0xff)
|
|
#define ATMEL_GET_PIN_FUNC(pinfunc) ((pinfunc >> 16) & 0xf)
|
|
#define ATMEL_GET_PIN_IOSET(pinfunc) ((pinfunc >> 20) & 0xf)
|
|
|
|
#define AT91_PIO_PORTA 0x0
|
|
#define AT91_PIO_PORTB 0x1
|
|
#define AT91_PIO_PORTC 0x2
|
|
#define AT91_PIO_PORTD 0x3
|
|
|
|
int atmel_pio4_set_gpio(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_a_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_b_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_c_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_d_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_e_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_f_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_g_periph(u32 port, u32 pin, u32 config);
|
|
int atmel_pio4_set_pio_output(u32 port, u32 pin, u32 value);
|
|
int atmel_pio4_get_pio_input(u32 port, u32 pin);
|
|
|
|
#endif
|